Synlett 2022; 33(11): 1083-1086
DOI: 10.1055/a-1771-4883
letter

A Photochemical Microfluidic Reactor for Photosensitized [2+2] Cycloadditions

Martin Bargum
,
Mikkel Krell-Jørgensen
,
,
Katrine Qvortrup
,
Luca Laraia
Research in the Laraia Lab is supported by the Novo Nordisk Foundation (NNF21OC0067188), the Carlsberg Foundation (CF19-0072), and the Independent Research Fund Denmark (9041-00241B and 9041-00248B). K.Q. acknowledges the Carlsberg Foundation (CF18-0631) for financial support. M.N. acknowledges the Villum Foundation (19049) for financial support.


Abstract

Here we report a microfluidic system for photochemical cycloadditions fabricated using silicon micro processing technologies. The system was optimized to yield residence times of just a few minutes for a range of photochemical [2+2]-cycloaddition reactions facilitated using high power UV-LEDs at 375 nm and triplet photosensitizers, which removed the need for the low wavelengths typically required for these types of transformations. Adducts using different excitable olefins with different linear, carbocyclic, and heterocyclic coupling partners were explored to demonstrate the feasibility of performing photochemistry in microflow in an academic research environment. Finally, a reaction leading to a novel dihydrooxepin-2(3H)-one scaffold and a mechanistic proposal for its formation are reported.

Supporting Information



Publication History

Received: 28 October 2021

Accepted after revision: 14 February 2022

Accepted Manuscript online:
14 February 2022

Article published online:
14 March 2022

© 2022. Thieme. All rights reserved

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 
  • References and Notes

  • 1 Poplata S, Tröster A, Zou YQ, Bach T. Chem. Rev. 2016; 116: 9748
  • 2 Elliott LD, Kayal S, George MW, Booker-Milburn K. J. Am. Chem. Soc. 2020; 142: 14947
  • 3 Zheng J, Swords WB, Jung H, Skubi KL, Kidd JB, Meyer GJ, Baik MH, Yoon TP. J. Am. Chem. Soc. 2019; 141: 13625
  • 4 Elliott LD, Knowles JP, Koovits PJ, Maskill KG, Ralph MJ, Lejeune G, Edwards LJ, Robinson RI, Clemens IR, Cox B, Pascoe DD, Koch G, Eberle M, Berry MB, Booker-Milburn KI. Chem. Eur. J. 2014; 20: 15226
  • 5 Cambié D, Bottecchia C, Straathof NJ. W, Hessel V, Noël T. Chem. Rev. 2016; 116: 10276
  • 6 Elliott LD, Berry M, Harji B, Klauber D, Leonard J, Booker-Milburn KI. Org. Process Res. Dev. 2016; 20: 1806
  • 7 Pimparkar K, Yen B, Goodell J, Martin V, Lee WH, Porco J, Beeler A, Jensen K. J. Flow Chem. 2011; 1: 53
  • 8 Kreis LM, Krautwald S, Pfeiffer N, Martin RE, Carreira EM. Org. Lett. 2013; 15: 1634
  • 9 Skalenko YA, Druzhenko TV, Denisenko AV, Samoilenko MV, Dacenko OP, Trofymchuk SA, Grygorenko OO, Tolmachev AA, Mykhailiuk PK. J. Org. Chem. 2018; 83: 6275
  • 10 Ahuja S, Jockusch S, Ugrinov A, Sivaguru J. Eur. J. Org. Chem. 2020; 1478
  • 11 Demchuk OP, Hryshchuk OV, Vashchenko BV, Kozytskiy AV, Tymtsunik AV, Komarov IV, Grygorenko OO. J. Org. Chem. 2020; 85: 5927
  • 12 He J, Liu Q. Synthesis 2022; 54: 925
  • 13 Nettekoven M, Püllmann B, Martin RE, Wechsler D. Tetrahedron Lett. 2012; 53: 1363
  • 14 Lin Y, Kouznetsova TB, Craig SL. J. Am. Chem. Soc. 2020; 142: 2105
  • 15 Williams JD, Nakano M, Gérardy R, Rincón JA, De Frutos Ó, Mateos C, Monbaliu JC. M, Kappe CO. Org. Process Res. Dev. 2019; 23: 78
  • 16 Dalton C, Montgomery FC. J. Am. Chem. Soc. 1974; 2: 6230
  • 17 General Procedure: [2+2] Cycloadditions with N-Methyl Maleimide A standard solution of thioxanthone (0.1 equiv.) and N-Me maleimide (1 equiv.) dissolved in MeCN at 0.1 M was prepared. To 20 mL of the standard solution an alkene (1.5 equiv.) or alkyne (1.5 equiv.) was added, and the solution degassed for 30 min under nitrogen. The solution was transferred to a syringe and pumped through the chip at 6 mL/h under 375 nm irradiance at 35 °C using a Model 11 syringe pump from Harvard Apparatus. 2 mL of the solution was pumped through the chip to ensure steady-state conditions. A 1 mL aliquot was sampled for analysis of the crude reaction mixture by NMR and TLC. The reaction was sampled for 2.75 h followed by concentration under reduced pressure to yield a residue that was further purified by flash chromatography. (1R*,5S*)-1,3,5,6,6,7,7-Heptamethyl-3-azabicyclo [3.2.0]heptane-2,4-dione (6) Transparent oil (143.3 mg, 53% yield). 1H NMR (400 MHz, DMSO-d 6): δ = 2.88 (s, 2 H), 2.83 (s, 3 H), 1.15 (s, 6 H), 0.87 (s, 6 H). 13C NMR (101 MHz, DMSO-d 6): δ = 178.3, 46.8, 40.4, 26.6, 24.5, 21.6. HRMS-ESI [M+H]+: m/z calcd for C11H18NO2 +: 196.1332; found: 196.1331 [M+H]+ (Δ ppm = –0.51). ATR-FTIR: 2960, 2888, 2873, 1763, 1686, 1482, 1453, 1428, 1372 cm–1.
  • 18 Singh V, Porinchu M. J. Chem. Soc., Chem. Commun. 1993; 134
  • 19 Wilsey S, Bearpark MJ, Bernardi F, Olivucci M, Robb MA. J. Am. Chem. Soc. 1996; 118: 176
  • 20 Ahuja S, Raghunathan R, Kumarasamy E, Jockusch S, Sivaguru J. J. Am. Chem. Soc. 2018; 140: 13185
  • 21 Kollenz G, Terpetschnig E, Sterk H, Peters K, Peters EM. Tetrahedron 1999; 55: 2973