PDF herunterladen
CC BY 4.0 · Pharmaceutical Fronts 2019; 01(01): e11-e21
DOI: 10.1055/s-0039-1693657
Original Article
Georg Thieme Verlag KG Stuttgart · New York

Preliminary Development of Solid Dispersion for an Insoluble Compound ZL006 by Miniaturized Hot Melt Extrusion

Lijun Zhang
1   Department of Pharmaceutics, School of Pharmacy, Fudan University, Shanghai, China
2   Department of Microspheres Technology, National Pharmaceutical Engineering Research Center, China State Institute of Pharmaceutical Industry, Shanghai, China
,
Hansen Luan
2   Department of Microspheres Technology, National Pharmaceutical Engineering Research Center, China State Institute of Pharmaceutical Industry, Shanghai, China
,
Weiyue Lu
1   Department of Pharmaceutics, School of Pharmacy, Fudan University, Shanghai, China
,
Hao Wang
2   Department of Microspheres Technology, National Pharmaceutical Engineering Research Center, China State Institute of Pharmaceutical Industry, Shanghai, China
› Institutsangaben
Weitere Informationen

Publikationsverlauf

Publikationsdatum:
23. August 2019 (online)

Auch verfügbar auf
   Lizenzen und Reprints

Abstract

The purpose of this study was to develop a solid dispersion (SD) by miniaturized hot-melt extrusion (HME) for an insoluble molecule ZL006 which showed potency of increasing leukocytes. A preliminary formulation screening was conducted using solvent evaporation method. The selected SD formulation was further optimized and scaled up using a miniaturized twin-screw extruder. Solid-state characterizations of the scale-up SD and its corresponding physical mixture (PM) were performed by X-ray powder diffraction (XRPD), modulated differential scanning calorimetry (mDSC), and Fourier's transform infrared spectroscopy (FTIR). XRPD and mDSC results indicated the formation of amorphous SD. FTIR spectrum indicated the possible hydrogen bond formation between the compound and the excipient. A discriminating non-sink condition micro-dissolution of SD showed the fast release of ZL006 which was approximately two-fold and three-fold of dissolution of PM and pure crystalline compound, respectively. The preliminary in vivo pharmacokinetics (PK) study in rats showed 71% oral bioavailability from the SD, while the bioavailability of ZL006 conventional suspension was less than 1%. Thus, an SD formulation for ZL006 with improved solubility and bioavailability was developed by miniaturized HME with minimal amount of compound at early preclinical stage, which could enable the preclinical evaluation.

Keywords

solid dispersion - hot-melt extrusion - miniaturized - Soluplus - hydroxypropyl methylcellulose acetate succinate - ZL006
 

  • References

  • 1 Sun HY, Li CG, Xiao L, Wang GP, Liu QH. [Effect of ZL-004 on raising leukocyte count]. Yao Xue Xue Bao 2010; 45 (06) 797-800
    PubMedSuche in Google Scholar
  • 2 Zheng W, Jain A, Papoutsakis D, Dannenfelser RM, Panicucci R, Garad S. Selection of oral bioavailability enhancing formulations during drug discovery. Drug Dev Ind Pharm 2012; 38 (02) 235-247
    CrossrefPubMedSuche in Google Scholar
  • 3 Davis MT, Egan DP, Kuhs M. , et al. Amorphous solid dispersions of BCS class II drugs: a rational approach to solvent and polymer selection. Chem Eng Res Des 2016; 110: 192-199
    CrossrefSuche in Google Scholar
  • 4 Shah S, Maddineni S, Lu J, Repka MA. Melt extrusion with poorly soluble drugs. Int J Pharm 2013; 453 (01) 233-252
    CrossrefPubMedSuche in Google Scholar
  • 5 Crowley MM, Zhang F, Repka MA. , et al. Pharmaceutical applications of hot-melt extrusion: part I. Drug Dev Ind Pharm 2007; 33 (09) 909-926
    CrossrefPubMedSuche in Google Scholar
  • 6 Repka MA, Battu SK, Upadhye SB. , et al. Pharmaceutical applications of hot-melt extrusion: part II. Drug Dev Ind Pharm 2007; 33 (10) 1043-1057
    CrossrefPubMedSuche in Google Scholar
  • 7 Repka MA, Majumdar S, Kumar Battu S, Srirangam R, Upadhye SB. Applications of hot-melt extrusion for drug delivery. Expert Opin Drug Deliv 2008; 5 (12) 1357-1376
    CrossrefPubMedSuche in Google Scholar
  • 8 Lang B, McGinity JW, Williams III RO. Hot-melt extrusion--basic principles and pharmaceutical applications. Drug Dev Ind Pharm 2014; 40 (09) 1133-1155
    CrossrefPubMedSuche in Google Scholar
  • 9 Agrawal AM, Dudhedia MS, Zimny E. Hot melt extrusion: development of an amorphous solid dispersion for an insoluble drug from mini-scale to clinical scale. AAPS PharmSciTech 2016; 17 (01) 133-147
    CrossrefPubMedSuche in Google Scholar
  • 10 Repka MA, Bandari S, Kallakunta VR. , et al. Melt extrusion with poorly soluble drugs - An integrated review. Int J Pharm 2018; 535 (1,2): 68-85
    CrossrefPubMedSuche in Google Scholar
  • 11 Thiry J, Krier F, Evrard B. A review of pharmaceutical extrusion: critical process parameters and scaling-up. Int J Pharm 2015; 479 (01) 227-240
    CrossrefPubMedSuche in Google Scholar
  • 12 Nakamichi K, Nakano T, Yasuura H, Izumi S, Kawashima Y. The role of the kneading paddle and the effects of screw revolution speed and water content on the preparation of solid dispersions using a twin-screw extruder. Int J Pharm 2002; 241 (02) 203-211
    CrossrefPubMedSuche in Google Scholar
  • 13 Maddineni S, Battu SK, Morott J, Majumdar S, Murthy SN, Repka MA. Influence of process and formulation parameters on dissolution and stability characteristics of Kollidon® VA 64 hot-melt extrudates. AAPS PharmSciTech 2015; 16 (02) 444-454
    CrossrefPubMedSuche in Google Scholar
  • 14 Vasconcelos T, Marques S, das Neves J, Sarmento B. Amorphous solid dispersions: Rational selection of a manufacturing process. Adv Drug Deliv Rev 2016; 100: 85-101
    CrossrefPubMedSuche in Google Scholar
  • 15 Lang B, McGinity JW, Williams III RO. Dissolution enhancement of itraconazole by hot-melt extrusion alone and the combination of hot-melt extrusion and rapid freezing--effect of formulation and processing variables. Mol Pharm 2014; 11 (01) 186-196
    CrossrefPubMedSuche in Google Scholar
  • 16 Sotthivirat S, McKelvey C, Moser J, Rege B, Xu W, Zhang D. Development of amorphous solid dispersion formulations of a poorly water-soluble drug, MK-0364. Int J Pharm 2013; 452 (1,2): 73-81
    CrossrefPubMedSuche in Google Scholar
  • 17 Zecevic DE, Wagner KG. Rational development of solid dispersions via hot-melt extrusion using screening, material characterization, and numeric simulation tools. J Pharm Sci 2013; 102 (07) 2297-2310
    CrossrefPubMedSuche in Google Scholar
  • 18 Wyttenbach N, Janas C, Siam M. , et al. Miniaturized screening of polymers for amorphous drug stabilization (SPADS): rapid assessment of solid dispersion systems. Eur J Pharm Biopharm 2013; 84 (03) 583-598
    CrossrefPubMedSuche in Google Scholar
  • 19 Shanbhag A, Rabel S, Nauka E. , et al. Method for screening of solid dispersion formulations of low-solubility compounds--miniaturization and automation of solvent casting and dissolution testing. Int J Pharm 2008; 351 (1,2): 209-218
    CrossrefPubMedSuche in Google Scholar
  • 20 Banda A, Manchanda A, Zhang W, Alba GM, Nagapudi K. Comparative assessment of miniaturized screening approaches for selection of polymers for amorphous drug stabilization. J Pharm Sci 2018; 107 (03) 897-908
    CrossrefPubMedSuche in Google Scholar
  • 21 Zhang Q, Zhao Y, Zhao Y. , et al. Effect of HPMCAS on recrystallization inhibition of nimodipine solid dispersions prepared by hot-melt extrusion and dissolution enhancement of nimodipine tablets. Colloids Surf B Biointerfaces 2018; 172 (172) 118-126
    CrossrefPubMedSuche in Google Scholar
  • 22 Friesen DT, Shanker R, Crew M, Smithey DT, Curatolo WJ, Nightingale JA. Hydroxypropyl methylcellulose acetate succinate-based spray-dried dispersions: an overview. Mol Pharm 2008; 5 (06) 1003-1019
    CrossrefPubMedSuche in Google Scholar
  • 23 Vo AQ, Feng X, Zhang J, Zhang F, Repka MA. Dual mechanism of microenvironmental pH modulation and foam melt extrusion to enhance performance of HPMCAS based amorphous solid dispersion. Int J Pharm 2018; 550 (1-2): 216-228
    CrossrefPubMedSuche in Google Scholar
  • 24 Zhao F, Luan H, Ma Y. , et al. Intestinal absorption of PLGA nanoparticles loaded with ZL004. Chinese Journal of Pharmaceutics 2014; 45 (01) 49-55 . DOI 10.16522/j.cnki.cjph.2014.01.014
    Suche in Google Scholar
  • 25 Albadarin AB, Potter CB, Davis MT. , et al. Development of stability-enhanced ternary solid dispersions via combinations of HPMCP and Soluplus processed by hot melt extrusion. Int J Pharm 2017; 532 (01) 603-611
    CrossrefPubMedSuche in Google Scholar
  • 26 Zecevic DE, Meier R, Daniels R, Wagner KG. Site specific solubility improvement using solid dispersions of HPMC-AS/HPC SSL-mixtures. Eur J Pharm Biopharm 2014; 87 (02) 264-270
    CrossrefPubMedSuche in Google Scholar
  • 27 Alshahrani SM, Lu W, Park JB. , et al. Stability-enhanced hot-melt extruded amorphous solid dispersions via combinations of Soluplus and HPMCAS-HF. AAPS PharmSciTech 2015; 16 (04) 824-834
    CrossrefPubMedSuche in Google Scholar
  • 28 Pawar J, Tayade A, Gangurde A, Moravkar K, Amin P. Solubility and dissolution enhancement of efavirenz hot melt extruded amorphous solid dispersions using combination of polymeric blends: A QbD approach. Eur J Pharm Sci 2016; 88 (88) 37-49
    CrossrefPubMedSuche in Google Scholar
  • 29 He Y, Ho C. Amorphous solid dispersions: utilization and challenges in drug discovery and development. J Pharm Sci 2015; 104 (10) 3237-3258
    CrossrefPubMedSuche in Google Scholar
  • 30 Penumetcha SS, Gutta LN, Dhanala H. , et al. Hot melt extruded Aprepitant-Soluplus solid dispersion: preformulation considerations, stability and in vitro study. Drug Dev Ind Pharm 2016; 42 (10) 1609-1620
    CrossrefPubMedSuche in Google Scholar
  • 31 Lu J, Obara S, Liu F, Fu W, Zhang W, Kikuchi S. Melt extrusion for a high melting point compound with improved solubility and sustained release. AAPS PharmSciTech 2018; 19 (01) 358-370
    CrossrefPubMedSuche in Google Scholar
  • 32 Linn M, Collnot EM, Djuric D. , et al. Soluplus as an effective absorption enhancer of poorly soluble drugs in vitro and in vivo. Eur J Pharm Sci 2012; 45 (03) 336-343
    CrossrefPubMedSuche in Google Scholar
  • 33 Lian X, Dong J, Zhang J. , et al. Soluplus based 9-nitrocamptothecin solid dispersion for peroral administration: preparation, characterization, in vitro and in vivo evaluation. Int J Pharm 2014; 477 (1,2): 399-407
    CrossrefPubMedSuche in Google Scholar
  • 34 Guo Y, Luo J, Tan S, Otieno BO, Zhang Z. The applications of vitamin E TPGS in drug delivery. Eur J Pharm Sci 2013; 49 (02) 175-186
    CrossrefPubMedSuche in Google Scholar