RSS-Feed abonnieren
DOI: 10.1055/a-2344-5084
Biomechanical Effects of Stem Extension of Tibial Components for Medial Tibial Bone Defects in Total Knee Arthroplasty: A Finite Element Study
![](https://www.thieme-connect.de/media/jks/EFirst/lookinside/thumbnails/10-1055-a-2344-5084_23oct0125oa-1.jpg)
Abstract
The aim of this study was to investigate the biomechanical effects of stem extension with a medial tibial bone defect in primary total knee arthroplasty (TKA) on load distribution and stress in the proximal tibia using finite element (FE) analysis.
FE simulations were performed on the tibia bone to evaluate the stress and strain on the tibia bone and bone cement. This was done to investigate the stress shielding effect, stability of the tibia plate, and the biomechanical effects in TKA models with various medial defects and different stem length models.
The results demonstrated that in the bone defect model, the longer the stem, the lower the average von Mises stress on the cortical and trabecular bones. In particular, as the bone defect increased, the average von Mises stress on cortical and trabecular bones increased. The average increase in stress according to the size of the bone defect was smaller in the long stem than in the short stem. The maximal principal strain on the trabecular bone occurred mainly at the contact point on the distal end of the stem of the tibial implant. When a short stem was applied, the maximal principal strain on the trabecular bone was approximately 8% and 20% smaller than when a long stem was applied or when no stem was applied, respectively.
The findings suggest that a short stem extension of the tibial component could help achieve excellent biomechanical results when performing TKA with a medial tibial bone defect.
Keywords
stem extension - medial tibial bone defects - total knee arthroplasty - finite element analysisEthical Approval
This article does not contain any studies with living sources including humans or animals.
Data Availability
The data presented in this study are available on request from the corresponding author.
Disclosure
The funders had no role in study design, data collection and interpretation, or the decision to submit the work for publication.
* These authors contributed equally to this work and should be considered co-corresponding authors.
Publikationsverlauf
Eingereicht: 01. November 2023
Angenommen: 11. Juni 2024
Accepted Manuscript online:
13. Juni 2024
Artikel online veröffentlicht:
28. Juni 2024
© 2024. Thieme. All rights reserved.
Thieme Medical Publishers, Inc.
333 Seventh Avenue, 18th Floor, New York, NY 10001, USA
-
References
- 1 Abdel MP, Morrey ME, Jensen MR, Morrey BF. Increased long-term survival of posterior cruciate-retaining versus posterior cruciate-stabilizing total knee replacements. J Bone Joint Surg Am 2011; 93 (22) 2072-2078
- 2 Ko DO, Lee S, Kim JH, Hwang IC, Jang SJ, Jung J. The influence of femoral internal rotation on patellar tracking in total knee arthroplasty using gap technique. Clin Orthop Surg 2021; 13 (03) 352-357
- 3 Hampton CB, Berliner ZP, Nguyen JT. et al. Aseptic loosening at the tibia in total knee arthroplasty: a function of cement mantle quality?. J Arthroplasty 2020; 35 (6S): S190-S196
- 4 Gu S, Kuriyama S, Nakamura S, Nishitani K, Ito H, Matsuda S. Underhang of the tibial component increases tibial bone resorption after total knee arthroplasty. Knee Surg Sports Traumatol Arthrosc 2019; 27 (04) 1270-1279
- 5 Hegde V, Bracey DN, Brady AC, Kleeman-Forsthuber LT, Dennis DA, Jennings JM. A prophylactic tibial stem reduces rates of early aseptic loosening in patients with severe preoperative varus deformity in primary total knee arthroplasty. J Arthroplasty 2021; 36 (07) 2319-2324
- 6 Ritter MA, Davis KE, Davis P. et al. Preoperative malalignment increases risk of failure after total knee arthroplasty. J Bone Joint Surg Am 2013; 95 (02) 126-131
- 7 Hamilton DF, Howie CR, Burnett R, Simpson AH, Patton JT. Dealing with the predicted increase in demand for revision total knee arthroplasty: challenges, risks and opportunities. Bone Joint J 2015; 97-B (06) 723-728
- 8 Fehring TK, Fehring KA, Anderson LA, Otero JE, Springer BD. Catastrophic varus collapse of the tibia in obese total knee arthroplasty. J Arthroplasty 2017; 32 (05) 1625-1629
- 9 Scott CE, Biant LC. The role of the design of tibial components and stems in knee replacement. J Bone Joint Surg Br 2012; 94 (08) 1009-1015
- 10 Quevedo González FJ, Meyers KN, Schraut N. et al. Do metaphyseal cones and stems provide any biomechanical advantage for moderate contained tibial defects in revision TKA? A finite-element analysis based on a cadaver model. Clin Orthop Relat Res 2021; 479 (11) 2534-2546
- 11 Gopalakrishnan A, Hedley AK, Kester MA. Magnitude of cement-device interfacial stresses with and without tibial stemming: impact of BMI. J Knee Surg 2011; 24 (01) 3-8
- 12 Rawlinson JJ, Peters LE, Campbell DA, Windsor R, Wright TM, Bartel DL. Cancellous bone strains indicate efficacy of stem augmentation in constrained condylar knees. Clin Orthop Relat Res 2005; 440: 107-116
- 13 Parratte S, Ollivier M, Lunebourg A, Verdier N, Argenson JN. Do stemmed tibial components in total knee arthroplasty improve outcomes in patients with obesity?. Clin Orthop Relat Res 2017; 475 (01) 137-145
- 14 Meijer MF, Boerboom AL, Stevens M. et al. Tibial component with and without stem extension in a trabecular metal cone construct. Knee Surg Sports Traumatol Arthrosc 2017; 25 (11) 3644-3652
- 15 Steere JT, Sobieraj MC, DeFrancesco CJ, Israelite CL, Nelson CL, Kamath AF. Prophylactic tibial stem fixation in the obese: comparative early results in primary total knee arthroplasty. Knee Surg Relat Res 2018; 30 (03) 227-233
- 16 Xie S, Conlisk N, Hamilton D, Scott C, Burnett R, Pankaj P. Metaphyseal cones in revision total knee arthroplasty: the role of stems. Bone Joint Res 2020; 9 (04) 162-172
- 17 Barrack RL, Rorabeck C, Burt M, Sawhney J. Pain at the end of the stem after revision total knee arthroplasty. Clin Orthop Relat Res 1999; (367) 216-225
- 18 Park HJ, Bae TS, Kang S-B, Baek HH, Chang MJ, Chang CB. A three-dimensional finite element analysis on the effects of implant materials and designs on periprosthetic tibial bone resorption. PLoS ONE 2021; 16 (02) e0246866
- 19 Zhang Q-H, Cossey A, Tong J. Stress shielding in periprosthetic bone following a total knee replacement: effects of implant material, design and alignment. Med Eng Phys 2016; 38 (12) 1481-1488
- 20 Au AG, James Raso V, Liggins AB, Amirfazli A. Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements. J Biomech 2007; 40 (06) 1410-1416
- 21 Xie S, Conlisk N, Hamilton D, Scott C, Burnett R, Pankaj P. A finite element analysis of tibial tritanium cones without stems in varying bone defects. Knee 2020; 27 (03) 656-666
- 22 Cho BW, Kang KT, Kwon HM. et al. Biomechanical effect of anatomical tibial component design on load distribution of medial proximal tibial bone in total knee arthroplasty : finite element analysis indicating anatomical design prevents stress-shielding. Bone Joint Res 2022; 11 (05) 252-259
- 23 Kang K, Jang YW, Yoo OS. et al. Biomechanical characteristics of three baseplate rotational arrangement techniques in total knee arthroplasty. BioMed Res Int 2018; 2018: 9641417
- 24 Kwon OR, Kang KT, Son J, Suh DS, Baek C, Koh YG. Importance of joint line preservation in unicompartmental knee arthroplasty: finite element analysis. J Orthop Res 2017; 35 (02) 347-352
- 25 Chong DY, Hansen UN, Amis AA. The influence of tibial prosthesis design features on stresses related to aseptic loosening and stress shielding. J Mech Med Biol 2011; 11 (01) 55-72
- 26 Park MH, Bin SI, Kim JM, Lee BS, Lee CR, Kwon YH. Using a tibial short extension stem reduces tibial component loosening after primary total knee arthroplasty in severely varus knees: long-term survival analysis with propensity score matching. J Arthroplasty 2018; 33 (08) 2512-2517
- 27 Morwood MP, Guss AD, Law JI, Pelt CE. Metaphyseal stem extension improves tibial stability in cementless total knee arthroplasty. J Arthroplasty 2020; 35 (10) 3031-3037
- 28 Chon JG, Kang JW, Kim CU, Jeong U, Go J. Treatment of 10-mm-deep or greater uncontained tibial bone defects in primary total knee reconstruction without metal augmentation: autologous oblique structural peg bone and cancellous chip bone grafting. Clin Orthop Surg 2021; 13 (02) 168-174
- 29 Liu Y, Zhang A, Wang C. et al. Biomechanical comparison between metal block and cement-screw techniques for the treatment of tibial bone defects in total knee arthroplasty based on finite element analysis. Comput Biol Med 2020; 125: 104006
- 30 Shafaghi R, Rodriguez O, Schemitsch EH. et al. A review of materials for managing bone loss in revision total knee arthroplasty. Mater Sci Eng C 2019; 104: 109941
- 31 Cuckler JM. Bone loss in total knee arthroplasty: graft augment and options. J Arthroplasty 2004; 19 (4, Suppl 1): 56-58
- 32 Completo A, Fonseca F, Simões JA. Strain shielding in proximal tibia of stemmed knee prosthesis: experimental study. J Biomech 2008; 41 (03) 560-566
- 33 Filip AC, Cuculici SA, Cristea S. et al. Tibial stem extension versus standard configuration in total knee arthroplasty: a biomechanical assessment according to bone properties. Medicina (Kaunas) 2022; 58 (05) 634