Synlett 2015; 26(06): 815-819
DOI: 10.1055/s-0034-1379986
letter
© Georg Thieme Verlag Stuttgart · New York

The Synthesis of 5,5-Disubstituted Piperidinones via a Reductive Amination–Lactamization Sequence: The Formal Synthesis of (±)-Quebrachamine

Huck K. Grover
Department of Chemistry, The University of Western Ontario, London, ON, N6A 5B7, Canada   Email: makerr@uwo.ca
,
Michael A. Kerr*
Department of Chemistry, The University of Western Ontario, London, ON, N6A 5B7, Canada   Email: makerr@uwo.ca
› Author Affiliations
Further Information

Publication History

Received: 08 October 2014

Accepted after revision: 18 December 2014

Publication Date:
05 February 2015 (online)


Abstract

A preliminary investigation into the prospect of a common synthetic intermediate for the synthesis of a variety of indole alkaloids has led to a synthesis of substituted piperidinones and the corresponding piperidines. These common natural product cores are accessed via a reductive amination–lactamization sequence of dimethyl 3-ethyl-3-formylpimelate. The synthetic utility of this initial study has been displayed in the formal synthesis of (±)-quebrachamine.

Supporting Information

 
  • References and Notes

    • 5a Laronze P, Laronze-Fontaine J, Levy J, Le Men J. Tetrahedron Lett. 1974; 491
    • 5b Giri V, Ali E, Parkashi S. J. Heterocycl. Chem. 1980; 17: 1133
  • 8 Sequential additions of sodium borohydride in between reflux periods are required to ensure complete conversion. See experimental for details.
  • 9 Excess sodium borohydride is used. See experimental for details.
  • 10 Hesse O. Ber. Dtsch. Chem. Ges. 1881; 13: 2308
  • 12 All attempts at a one-pot Larock-type indole synthesis resulted in significantly lower yields of the desired product. In most cases increased reaction times were required.
  • 13 Bajtos B, Pagenkopf B. Eur. J. Org. Chem. 2009; 1072
  • 14 General Experimental Procedure for the Synthesis of Piperidinones 3a–i Compound 2 (1 equiv) and primary amine (1 equiv) were dissolved in MeOH. Sc(OTf)3 (0.025 equiv) was then added, and the mixture was stirred for 1–2 h, followed by the addition of NaBH4 (1.25 equiv). Upon completion by TLC analysis H2O was added to the reaction mixture and extracted 3 times with EtOAc. The organic layer was dried, and the solvent was removed. The residue was purified by flash chromatography (EtOAc–hexanes) to yield the desired piperidinones 3ai. Piperidinone 3c Yellow oil, 76% yield (346 mg, 0.93 mmol). Rf = 0.27, EtOAc. 1H NMR (600 MHz, CDCl3): δ = 3.76 (dd, J = 5.9, 5.9 Hz, 2 H), 3.67 (s, 3 H), 3.49–3.40 (m, 2 H), 3.18 (AB system, 2 H), 2.35 (dd, J = 7.0, 7.0 Hz, 2 H), 2.25–2.22 (m, 2 H), 1.75–1.66 (m, 2 H), 1.63–1.55 (m, 2 H), 1.44–1.38 (m, 1 H), 1.36–1.30 (m, 1 H), 0.89 (s, 9 H), 0.84 (t, J = 7.3 Hz, 3 H), 0.05 (s, 6 H). 13C NMR (150 MHz, CDCl3): δ = 173.8, 169.6, 61.6, 58.9, 51.7, 50.5, 34.5, 29.7, 28.9, 28.5, 28.3, 26.9, 25.8, 18.1, 7.4, –5.5. IR (thin film): 2930, 2858, 1740, 1646, 1493, 1470, 1436, 1363, 1256, 1105, 1054, 1006, 921, 837, 778 cm–1. HRMS: m/z calcd for C19H37NO4Si [M + 1]: 372.2565; found: 372.2565. Piperidinone 3e Orange oil, 81% yield (202 mg, 0.67 mmol). Rf = 0.28, EtOAc. 1H NMR (600 MHz, CDCl3): δ = 7.32–7.30 (m, 2 H), 7.27–7.24 (m, 3 H), 4.57 (AB system, 2 H), 3.65 (s, 3 H), 2.91 (AB system, 2 H), 2.46 (dd, J = 7.0, 1.2 Hz, 2 H), 2.18–2.12 (m, 1 H), 2.04–1.98 (m, 1 H), 1.63–1.59 (m, 4 H), 1.33–1.22 (m, 2 H), 0.71 (t, J = 7.6 Hz, 3 H). 13C NMR (150 MHz, CDCl3): δ = 173.7, 169.5, 137.1, 128.6, 128.3, 127.5, 55.4, 51.7, 50.3, 34.3, 30.0, 28.9, 28.5, 28.2, 26.5, 7.2. IR (thin film): 3454, 3056, 3062, 3029, 2948, 1736, 1647, 1494, 1454, 1363, 1229, 1069, 1002, 854, 703 cm–1. HRMS: m/z calcd for C18H25NO3 [M]: 303.1834; found: 303.1825. General Experimental Procedure for the Synthesis of 5-(3-Hydroxypropyl)piperidin-2-one 4a–c Procedure 1 Piperidinone (1 equiv) was dissolved in MeOH, followed by the addition of NaBH4 (5 equiv). The mixture was heated to reflux for 10 min and then cooled to r.t. Then additional NaBH4 (5 equiv) was added followed by a 10 min reflux period, this process was continued until a total of 40 equiv NaBH4 was added. Upon complete addition of NaBH4, H2O was slowly added to the reaction mixture and extracted 3 times with EtOAc. The organic layer was dried, and the solvent was removed. The residue was purified by flash chromatography (EtOAc–hexanes) to yield the desired piperidinones 4ac. Procedure 2 Dimethyl 3-ethyl-3-formylpimelate (1 equiv) and primary amine (1 equiv) were dissolved in MeOH. Sc(OTf)3 (0.025 equiv) was then added, and the mixture was stirred for 1–2 h, followed by the addition of NaBH4 (5 equiv). The mixture was heated to reflux for 10 min and then cooled to r.t. Then additional NaBH4 (5 equiv) was added followed by a 10 min reflux period, this process was continued until a total of 40 equiv NaBH4 was added. Upon complete addition of NaBH4, H2O was slowly added to the reaction mixture and extracted 3 times with EtOAc. The organic layer was dried and the solvent was removed. The residue was purified by flash chromatography (EtOAc–hexanes) to yield the desired piperidinones 4ac. 5-(3-Hydroxypropyl)piperidin-2-one 4a Thick yellow oil, 99% yield (630 mg, 1.81 mmol). Rf = 0.14, EtOAc. 1H NMR (600 MHz, CDCl3): δ = 3.71 (dd, J = 5.3, 5.3 Hz, 2 H), 3.56 (dd, J = 5.9, 5.9 Hz, 2 H), 3.46–3.42 (m, 1 H), 3.37–3.33 (m, 1 H), 3.14 (AB system, 2 H), 2.47 (br s, 1 H), 2.29 (dd, J = 7.0, 7.0 Hz, 2 H), 1.55 (dd, J = 7.0, 7.0 Hz, 2 H), 1.46–1.34 (m, 4), 1.33–1.26 (m, 2 H), 0.84 (s, 9 H), 0.79 (t, J = 7.6 Hz, 3 H), 0.00 (s, 6 H). 13C NMR (150 MHz, CDCl3): δ = 170.1, 62.9, 61.4, 59.3, 50.5, 34.5, 30.0, 29.8, 28.5, 27.1, 26.2, 25.8, 18.1, 7.4, –5.5. IR (thin film): 2930, 2858, 1626, 1497, 1464, 1418, 1362, 1255, 1101, 1058, 837, 778 cm–1. HRMS: m/z calcd for C18H37NO3Si [M + 1]: 344.2622; found: 344.2615. 5-(3-Hydroxypropyl)piperidin-2-one 4c Dark yellow oil, 100% yield (1459 mg, 5.30 mmol). Rf = 0.14, EtOAc; 1H NMR (600 MHz, CDCl3): δ = 7.32–7.30 (m, 2 H), 7.27–7.24 (m, 3 H), 4.55 (AB system, 2 H), 3.51 (dd, J = 5.9, 5.9 Hz, 2 H), 2.92 (AB system, 2 H), 2.43 (dd, J = 7.0, 7.0 Hz, 2 H), 1.62 (m, 3 H), 1.43–1.35 (m, 1 H), 1.34–1.16 (m, 5 H), 0.71 (t, J = 7.0 Hz, 3 H). 13C NMR (150 MHz, CDCl3): δ = 169.8, 137.3, 128.5, 128.3, 127.4, 63.1, 55.7, 50.3, 34.3, 30.2, 29.9, 28.5, 26.9, 26.2, 7.3. IR (thin film): 3395, 2939, 2866, 1620, 1496, 1454, 1419, 1363, 1308, 1229, 1067, 1028, 703 cm–1. HRMS: m/z calcd for ­C17H25NO2 [M]: 275.1885; found: 275.1880. General Experimental Procedure for the Synthesis of Piperidines 5a,b Piperidinone (1 equiv) was dissolved in THF followed by the addition of Red-Al® (65% by weight; 4 equiv). Upon completion by TLC analysis H2O was added to the reaction mixture and extracted 3 times with EtOAc. The organic layer was dried and the solvent was removed. The residue was purified by flash chromatography (EtOAc–hexanes) to yield the desired product 5a,b. Piperidine 5a Orange oil, 72% yield (160 mg, 0.49 mmol). Rf = 0.11, EtOAc. 1H NMR (600 MHz, CDCl3): δ = 3.71 (dd, J = 6.5, 6.5 Hz, 2 H), 3.61 (ddd, J = 6.5, 6.5, 2.3 Hz, 2 H), 2.51–2.39 (m, 3 H), 2.31–2.19 (m, 2 H), 2.08–2.04 (m, 1 H), 1.61–1.50 (m, 2 H), 1.49–1.37 (m, 3 H), 1.36–1.25 (m, 4 H), 1.20–1.16 (m, 1 H), 0.88 (s, 9 H), 0.77 (t, J = 7.0 Hz, 3 H), 0.05 (s, 6 H). 13C NMR (150 MHz, CDCl3): δ = 63.8, 63.6, 61.3, 61.2, 55.4, 35.3, 33.6, 28.3, 25.9, 21.9, 18.3, 7.3, 5.3 (missing 2 carbons, presumably due to overlap). IR (thin film): 2933, 2857, 1463, 1255, 1103, 1068, 836, 776 cm–1. HRMS: m/z calcd for C18H39NO2Si [M]: 329.2750; found: 329.2754.