Synlett 2015; 26(13): 1835-1840
DOI: 10.1055/s-0034-1380441
letter
© Georg Thieme Verlag Stuttgart · New York

One-Pot Synthesis of α-Fluoroketones and 3-Fluoro-2,4-diaryl­furans from Trifluoromethyl β-Diketones via Decarboxylation

Tongle Shao
a   Laboratory for Advanced Material and Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, P. R. of China
,
Xiang Fang*
a   Laboratory for Advanced Material and Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, P. R. of China
b   Department of Chemistry, University of Toronto, 80 St. George St., Toronto, Ontario, M5S 3H6, Canada
,
Xueyan Yang*
a   Laboratory for Advanced Material and Institute of Fine Chemicals, School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, P. R. of China
› Institutsangaben
Weitere Informationen

Publikationsverlauf

Received: 17. April 2015

Accepted after revision: 17. Mai 2015

Publikationsdatum:
09. Juli 2015 (online)


Abstract

A facile and mild one-pot protocol via decarboxylation of trifluoromethyl β-diketones has been developed for the construction of α-fluoroketones and 3-fluoro-2,4-diarylfurans which are important units in many biologically active compounds and useful precursors in a variety of functional-group transformations.

Supporting Information

 
  • References and Notes

  • 2 Ilardi EA, Vitaku E, Njardarson JT. J. Med. Chem. 2014; 57: 2832
  • 6 Furuya T, Kuttruff CA, Ritter T. Curr. Opin. Drug Discovery Dev. 2008; 11: 803
  • 12 Ma YH, Zhang S, Yang SP, Song FJ, You JS. Angew. Chem. Int. Ed. 2014; 53: 7870
  • 13 Bronnert DL. E, Saunders BC. Tetrahedron 1965; 21: 3325
  • 14 Arimitsu S, Jacobsen JM, Hammond GB. J. Org. Chem. 2008; 73: 2886
    • 16a Sloop JC, Boyle PD, Fountain AW, Pearman WF, Swann JA. Eur. J. Org. Chem. 2011; 936
    • 16b Sloop JC, Bumgardner CL, Washington G, Loehle WD, Sankar SS, Lewis AB. J. Fluorine Chem. 2006; 127: 780
  • 17 Typical Experimental Procedure for the Synthesis of 2 from 1 To a mixture of 1d (146 mg, 0.5 mmol) and Na2CO3 (159 mg, 1.5 mmol) in MeCN (0.3 mL) and H2O (0.1 mL), a solution of Selectfluor (212 mg, 0.6 mmol) in MeCN (0.3 mL) and H2O (0.3 mL) was added over 30 min at 0 °C. The reaction mixture was then stirred for 8 h at 0 °C. When the reaction was complete (monitored by TLC), sat. aq NH4Cl (4 mL) was added to quench the reaction. After extraction with CH2Cl2 and drying with Na2SO4, the organic layer was concentrated under reduced pressure, and the residue was purified by column chromatography on silica gel using hexane–EtOAc (20:1) as eluent to afford the desired products 2d (64 mg, 60%). 1-[(1,1′-Biphenyl)-4-yl]-2-fluoroethanone (2d) White solid; mp 131.5–132.4 °C. 1H NMR (400 MHz, CDCl3): δ = 7.98 (d, J = 8.0 Hz, 2 H), 7.73–7.71 (m, 2 H), 7.64–7.62 (m, 2 H), 7.51–7.47 (m, 2 H), 7.44–7.40 (m, 1 H), 5.56 (d, J = 48.0 Hz, 2 H). 13C NMR (101 MHz, CDCl3): δ = 193.0 (d, J = 15.2 Hz), 146.8, 139.5, 132.3, 129.0, 128.5, 128.4 (d, J = 2.0 Hz), 127.4, 127.2, 83.7 (d, J = 183.8 Hz). 19F NMR (376 MHz, CDCl3): δ = –230.28 (t, J = 48.8 Hz, 1 F). IR (KBr): ν = 3380, 2929, 2851, 1700, 1602, 1407, 1241, 1207, 1091, 975, 766, 691 cm–1. MS (EI): m/z = 214, 182, 181 (100), 152, 76, 51. HRMS: m/z calcd for [C14H11FO]+: 214.0794; found: 214.0795.
  • 18 Typical Experimental Procedure for the Synthesis of 3 from 1 To a mixture of 1a (108 mg, 0.5 mmol) and NaOH (80 mg, 2.0 mmol) in MeCN (0.2 mL) and H2O (0.1 mL), a solution of Selectfluor (212 mg, 0.6 mmol) in MeCN (0.3 mL) and H2O (0.1 mL) was added slowly at 0 °C. The reaction mixture was stirred for 3 h at 0 °C. It was then heated for 6 h at 50 °C. When the reaction was complete (monitored by TLC), sat. aq NH4Cl (6 mL) was added to quench the reaction. After extraction with EtOAc and drying with Na2SO4, the organic layer was concentrated under reduced pressure, and the residue was purified by column chromatography on silica gel using hexane–EtOAc (60:1 to 30:1) as eluent to afford the desired products 3a (40 mg, 67%). 3-Fluoro-2,4-diphenylfuran (3a) White solid; mp 78.4–79.0 °C. 1H NMR (400 MHz, CDCl3) δ = 7.75 (d, J = 8.0 Hz, 2 H), 7.60 (d, J = 8.0 Hz, 2 H), 7.54 (d, J = 4.0 Hz, 1 H), 7.46–7.41 (m, 4 H), 7.36–7.29 (m, 2 H). 13C NMR (101 MHz, CDCl3): δ = 147.5 (d, J = 256.5 Hz), 137.7 (d, J = 21.2 Hz), 136.3 (d, J = 7.1 Hz), 129.3 (d, J = 3.0 Hz), 128.9 (d, J = 3.0 Hz), 128.8, 128.7, 127.7, 127.3, 126.5 (d, J = 3.0 Hz), 123.5 (d, J = 6.0 Hz), 119.4 (d, J = 14.1 Hz). 19F NMR (376 MHz, CDCl3): δ = –166.91 (d, J = 3.7 Hz, 1 F). IR (KBr): ν = 3422, 3151, 2923, 2852, 1948, 1879, 1634, 1496, 1443, 1410, 1066, 908, 759, 747, 690 cm–1. MS (EI): m/z = 238 (100), 209, 133, 105, 91, 77, 44. HRMS: m/z calcd for [C16H11FO]+: 238.0794; found: 238.0795.