Subscribe to RSS
DOI: 10.1055/s-0036-1583267
A Cadaveric Analysis of the Optimal Radiographic Angle for Evaluating Trochlear Depth
Publication History
31 December 2015
11 March 2016
Publication Date:
28 April 2016 (online)
Abstract
Disorders of the patellofemoral joint are common. Diagnosis and management often involves the use tangential imaging of the patella and trochlear grove, with the sunrise projection being the most common. However, imaging protocols vary between institutions, and limited data exist to determine which radiographic projections provide optimal visualization of the trochlear groove at its deepest point. Plain radiographs of 48 cadaveric femora were taken at various beam–femur angles and the maximum trochlear depth was measured; a tilt-board apparatus was used to elevate the femur in 5-degree increments between 40 and 75 degrees. A corollary experiment was undertaken to investigate beam–femur angles osteologically: digital representations of each bone were created with a MicroScribe digitizer, and trochlear depth was measured on all specimens at beam–femur angles from 0 to 75 degrees. The results of the radiographic and digitizer experiments showed that the maximum trochlear grove depth occurred at a beam–femur angle of 50 degrees. These results suggest that the optimal beam–femur angle for visualizing maximum trochlear depth is 50 degrees. This is significantly lower than the beam–femur angle of 90 degrees typically used in the sunrise projection. Clinicians evaluating trochlear depth on sunrise projections may be underestimating maximal depth and evaluating a nonarticulating portion of the femur.
