Subscribe to RSS
DOI: 10.1055/s-0038-1633023
The Role of the External Bar in a 6-Pin Type 1 External Skeletal Fixation Device
Publication History
Received for publication
27 May 1992
Publication Date:
09 February 2018 (online)
![](https://www.thieme-connect.de/media/10.1055-s-00035023/199302/lookinside/thumbnails/10-1055-s-0038-1633023-1.jpg)
Summary
External skeletal fixation devices are commonly used in human and veterinary orthopedics. Although external fixators have proven useful over the years, their use is still associated with complications. The most frequently encountered complication is premature pin loosening with or without pin tract infection. Occasionally, implant failure involving the transla tion pins, pin clamps or external bar is seen. Each of these complications can contribute to patient morbidity through poor limb use, pain, loss of fracture reduction, and delayed unions or nonunions. A more thorough understanding of the biomechanics of external fixation devices may reduce the incidence of complications and associated patient morbidity. The objective of this study was to determine the role of the external connecting bar in a 6-pin type 1 external skeletal fixation device with respect to the forces transmitted to the surrounding bone for an axial load on the bone.
The methods used were finite element computer analysis and in vitro experimentation using a bone analog. The results obtained in both the FEA and in the in vitro experiments was that the middle pins on each bone segment experienced axial tension while the remainder of the pins experienced axial compression. Furthermore, increasing the stiffness of the external bar decreased the axial loads on all the pins, and more evenly distributed the end shear load and end moment on the pins.
The role of the external bar in a 6-pin type 1 ESF device was investigated using finite element computer analysis and in vitro experimentation. The results show that increasing the stiffness of the external bar decreases the axial loads and more equally distributes the end shear loads on the pins. Therefore, increasing the stiffness of the external bar may reduce the chance of complications related to excessive pin loads, such as pin loosening, pin breakage, and pin tract infection.
-
References
- 1 Aron DN, Toombs JR. Updated principles of external skeletal fixation. Comp Contin Educ Pract Vet 1984; 6: 845-59.
- 2 Aron DN, Toombs JR, Hollingsworth SC. Primary treatment of severe fractures by external skeletal fixation: threaded pins compared to smooth pins. J Am Anim Hosp Assoc 1986; 22: 659-70.
- 3 Aron DN. External skeletal fixation. Vet Med Report 1989; 1: 181-201.
- 4 Green SA. Pin tract infection. In: Complications of External Fixation. Green SA. (ed). Springfield, IL: Charles C. Thomas; 1981: 12-30.
- 5 Black J. Mechanical properties. In: Orthopedic Biomaterial in Research and Practice. Black J. (ed). New York: Churchill Livingstone; 1988: 267-83.
- 6 Ling RSM. Observations on the fixation of implants to the bony skeleton. Clin Orthop 1986; 21: 802-96.
- 7 Uhthoff HK. Mechanical factors influencing the holding power of screws in compact bone. J Bone Joint Surg 1973; 55B: 633-9.
- 8 Matthews LS, Green CA, Goldstein SA. The thermal effects of skeletal fixation-pin insertion in bone. J Bone Joint Surg 1984; 66 A: 1077-83.
- 9 Gumbs JM, Brinker WO, Decamp CE. et al. Comparison of acute and chronic pull-out resistance of pins used with the external fixator (Kirschner splint). J Am Anim Hosp Assoc 1988; 24: 231-4.
- 10 Palmer RH, Hulse DA, Polio FE. et al. Pin loosening in external fixation: the effect of pin design and implantation site. Proc Vet Ortho Soc 1991; 18: 50.
- 11 Evans M. The Oxford External Fixator. The 6th Annual Report of Oxford Orthopedic Engineering Centre, 1979
- 12 Evans M, Kcnwright J, Tanner KE. Analysis of single-sided external fracture fixation. Eng Med 1979; 8 (03) 133-7.