RSS-Feed abonnieren
DOI: 10.1055/s-0040-1721360
Measuring Acetabular Version after Total Hip Arthroplasty: A Comparison of Two Radiographic Methods[*]
Artikel in mehreren Sprachen: português | EnglishAbstract
Objective The objective of the present work was to compare the measurement of acetabular component version on anteroposterior (AP) and on cross-table radiographs after total hip arthroplasty (THA).
Methods Radiographs of 60 hips with a primary THA were selected. Version was calculated on the AP radiograph using the Lewinnek method and, on the cross-table, using the Woo and Morrey direct method.
Results Mean and standard deviation (SD) were different on both radiographs, being 9.7° ± 5.5° on the AP, whereas in the cross-table the measurements were 20.6° ± 8.4° (p < 0.001). Minding our aim of 10°, the cross-table measurements were statistically different from it (p < 0.001), while the AP measurement did not differ (p = 0.716).
Conclusion The present study showed that the best way to correctly evaluate the acetabular component positioning following a THA is by measuring anteversion and abduction on an AP radiograph after confirming, in a cross-table radiograph, that the component is not retroverted.
Financial Support
There was no financial support from public, commercial, or non-profit sources.
* Work developed at the Department of Orthopedics and Traumatology, Hospital Beatriz Ângelo, Loures, Portugal.
Publikationsverlauf
Eingereicht: 10. März 2020
Angenommen: 16. September 2020
Artikel online veröffentlicht:
22. März 2021
© 2021. Sociedade Brasileira de Ortopedia e Traumatologia. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commecial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)
Thieme Revinter Publicações Ltda.
Rua do Matoso 170, Rio de Janeiro, RJ, CEP 20270-135, Brazil
-
Referências
- 1 Charnley J. Total hip replacement by low-friction arthroplasty. Clin Orthop Relat Res 1970; 72 (72) 7-21
- 2 Del Schutte Jr H, Lipman AJ, Bannar SM, Livermore JT, Ilstrup D, Morrey BF. Effects of acetabular abduction on cup wear rates in total hip arthroplasty. J Arthroplasty 1998; 13 (06) 621-626
- 3 Widmer KH, Zurfluh B. Compliant positioning of total hip components for optimal range of motion. J Orthop Res 2004; 22 (04) 815-821
- 4 Woo RY, Morrey BF. Dislocations after total hip arthroplasty. J Bone Joint Surg Am 1982; 64 (09) 1295-1306
- 5 Murray DW. The definition and measurement of acetabular orientation. J Bone Joint Surg Br 1993; 75 (02) 228-232
- 6 Biedermann R, Tonin A, Krismer M, Rachbauer F, Eibl G, Stöckl B. Reducing the risk of dislocation after total hip arthroplasty: the effect of orientation of the acetabular component. J Bone Joint Surg Br 2005; 87 (06) 762-769
- 7 Lewinnek GE, Lewis JL, Tarr R, Compere CL, Zimmerman JR. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am 1978; 60 (02) 217-220
- 8 Ackland MK, Bourne WB, Uhthoff HK. Anteversion of the acetabular cup. Measurement of angle after total hip replacement. J Bone Joint Surg Br 1986; 68 (03) 409-413
- 9 Müller O, Reize P, Trappmann D, Wülker N. Measuring anatomical acetabular cup orientation with a new X-ray technique. Comput Aided Surg 2006; 11 (02) 69-75
- 10 Nho JH, Lee YK, Kim HJ, Ha YC, Suh YS, Koo KH. Reliability and validity of measuring version of the acetabular component. J Bone Joint Surg Br 2012; 94 (01) 32-36
- 11 Visser JD, Konings JG. A new method for measuring angles after total hip arthroplasty. A study of the acetabular cup and femoral component. J Bone Joint Surg Br 1981; 63B (04) 556-559
- 12 Widmer KH. A simplified method to determine acetabular cup anteversion from plain radiographs. J Arthroplasty 2004; 19 (03) 387-390
- 13 Arai N, Nakamura S, Matsushita T. Difference between 2 measurement methods of version angles of the acetabular component. J Arthroplasty 2007; 22 (05) 715-720
- 14 Coventry MB. Late dislocations in patients with Charnley total hip arthroplasty. J Bone Joint Surg Am 1985; 67 (06) 832-841
- 15 Seki M, Yuasa N, Ohkuni K. Analysis of optimal range of socket orientations in total hip arthroplasty with use of computer-aided design simulation. J Orthop Res 1998; 16 (04) 513-517
- 16 Abdel MP, von Roth P, Jennings MT, Hanssen AD, Pagnano MW. What Safe Zone? The Vast Majority of Dislocated THAs Are Within the Lewinnek Safe Zone for Acetabular Component Position. Clin Orthop Relat Res 2016; 474 (02) 386-391
- 17 Esposito CI, Gladnick BP, Lee YY. et al. Cup position alone does not predict risk of dislocation after hip arthroplasty. J Arthroplasty 2015; 30 (01) 109-113
- 18 Jolles BM, Zangger P, Leyvraz PF. Factors predisposing to dislocation after primary total hip arthroplasty: a multivariate analysis. J Arthroplasty 2002; 17 (03) 282-288
- 19 Ha YC, Yoo JJ, Lee YK, Kim JY, Koo KH. Acetabular component positioning using anatomic landmarks of the acetabulum. Clin Orthop Relat Res 2012; 470 (12) 3515-3523
- 20 Bhaskar D, Rajpura A, Board T. Current Concepts in Acetabular Positioning in Total Hip Arthroplasty. Indian J Orthop 2017; 51 (04) 386-396
- 21 McArthur B, Cross M, Geatrakas C, Mayman D, Ghelman B. Measuring acetabular component version after THA: CT or plain radiograph?. Clin Orthop Relat Res 2012; 470 (10) 2810-2818