PDF herunterladen
CC BY 4.0 · Eur J Dent 2022; 16(01): 188-194
DOI: 10.1055/s-0041-1732806
Original Article

Effects of SiO2 Incorporation on the Flexural Properties of a Denture Base Resin: An In Vitro Study

Sara T. Alzayyat
1   Department of Dental Education, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Ghadah A. Almutiri
1   Department of Dental Education, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Jawhara K. Aljandan
1   Department of Dental Education, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Raneem M. Algarzai
1   Department of Dental Education, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Soban Q. Khan
2   Department of Dental Education, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Sultan Akhtar
3   Department of Biophysics, Institute for Research and Medical Consultations, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Ijlal Shahrukh Ateeq
4   Biomedical Engineering department, College of Engineering, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
,
Mohammed M. Gad
5   Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia
› Institutsangaben Funding None.
› Weitere Informationen
Auch verfügbar auf
   Lizenzen und Reprints

Abstract

Objective The aim of this study was to evaluate the effects of the addition of low-silicon dioxide nanoparticles (nano-SiO2) on the flexural strength and elastic modulus of polymethyl methacrylate (PMMA) denture base material.

Materials and Methods A total of 50 rectangular acrylic specimens (65 × 10 × 2.5 mm3) were fabricated from heat-polymerized acrylic resin. In accordance with the amount of nano-SiO2, specimens were divided into the following five groups (n = 10 per group): a control group with no added SiO2, and four test groups modified with 0.05, 0.25, 0.5, and 1.0 wt% nano-SiO2 of acrylic powder. Flexural strength and elastic modulus were measured by using a 3-point bending test with a universal testing machine. A scanning electron microscope was used for fracture surface analyses. Data analyses were conducted through analysis of variance and Tukey’s post hoc test (α = 0.05).

Results Compared with the control group, flexural strength and modulus of elasticity tended to significantly increase (p ˂ 0.001) with the incorporation of nano-SiO2. In between the reinforced groups, the flexural strength significantly decreased (p ˂ 0.001) as the concentrations increased from 0.25 to 1.0%, with the 1.0% group showing the lowest value. Furthermore, the elastic modulus significantly increased (p ˂ 0.001) at 0.05% followed by 1.0%, 0.25%, 0.5%, and least in control group.

Conclusion A low nano-SiO2 addition increased the flexural strength and elastic modulus of a PMMA denture base resin.

Keywords

denture base - elastic modulus - flexural strength - polymethyl methacrylate - silicon dioxide nanoparticles


Publikationsverlauf

Artikel online veröffentlicht:
24. August 2021

© 2021. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. (https://creativecommons.org/licenses/by/4.0/).

Thieme Medical and Scientific Publishers Private Ltd
A-12, Second Floor, Sector -2, NOIDA -201301, India

 

  • References

  • 1 Peyton FA. History of resins in dentistry. Dent Clin North Am 1975; 19 (02) 211-222
    CrossrefPubMedGoogle Scholar
  • 2 Gad MM, Fouda SM, ArRejaie AS, Al-Thobity AM. Comparative effect of different polymerization techniques on the flexural and surface properties of acrylic denture bases. J Prosthodont 2019; 28 (04) 458-465
    CrossrefPubMedGoogle Scholar
  • 3 Jagger DC, Harrison A, Jandt KD. The reinforcement of dentures. J Oral Rehabil 1999; 26 (03) 185-194
    CrossrefPubMedGoogle Scholar
  • 4 Azzarri MJ, Cortizo MS, Alessandrini JL. Effect of the curing conditions on the properties of an acrylic denture base resin microwave-polymerised. J Dent 2003; 31 (07) 463-468
    CrossrefPubMedGoogle Scholar
  • 5 Gad MM, Fouda SM, Al-Harbi FA, Näpänkangas R, Raustia A. PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition. Int J Nanomedicine 2017; 12: 3801-3812
    CrossrefPubMedGoogle Scholar
  • 6 Vikram S, Chander NG. Effect of zinc oxide nanoparticles on the flexural strength of polymethylmethacrylate denture base resin. Eur Oral Res 2020; 54 (01) 31-35
    CrossrefPubMedGoogle Scholar
  • 7 Vojdani M, Bagheri R, Khaledi A. Effects of aluminum oxide addition on the flexural strength, surface hardness, and roughness of heat-polymerized acrylic resin. J Dent Sci 2012; 7 (03) 238-244
    CrossrefGoogle Scholar
  • 8 Sodagar A, Khalil S, Kassaee MZ, Shahroudi AS, Pourakbari B, Bahador A. Antimicrobial properties of poly (methyl methacrylate) acrylic resins incorporated with silicon dioxide and titanium dioxide nanoparticles on cariogenic bacteria. J Orthod Sci 2016; 5 (01) 7-13
    CrossrefPubMedGoogle Scholar
  • 9 Sodagar A, Bahador A, Khalil S, Shahroudi AS, Kassaee MZ. The effect of TiO2 and SiO2 nanoparticles on flexural strength of poly (methyl methacrylate) acrylic resins. J Prosthodont Res 2013; 57 (01) 15-19
    CrossrefPubMedGoogle Scholar
  • 10 Mahross HZ, Baroudi K. Effect of silver nanoparticles incorporation on viscoelastic properties of acrylic resin denture base material. Eur J Dent 2015; 9 (02) 207-212
    Artikel in Thieme ConnectPubMedGoogle Scholar
  • 11 Cevik P, Yildirim-Bicer AZ. The effect of silica and prepolymer nanoparticles on the mechanical properties of denture base acrylic resin. J Prosthodont 2018; 27 (08) 763-770
    CrossrefPubMedGoogle Scholar
  • 12 Gad MM, Abualsaud R, Al-Thobity AM. et al. Effect of SiO2 nanoparticles addition on the flexural strength of repaired acrylic denture base. Eur J Dent 2020; 14 (01) 19-23
    Artikel in Thieme ConnectPubMedGoogle Scholar
  • 13 Abushowmi TH, AlZaher ZA, Almaskin DF. et al. Comparative effect of glass fiber and nano-filler addition on denture repair strength. J Prosthodont 2020; 29 (03) 261-268
    CrossrefPubMedGoogle Scholar
  • 14 Alzayyat ST, Almutiri GA, Aljandan JK. et al. Antifungal efficacy and physical properties of poly(methylmethacrylate) denture base material reinforced with SiO2 nanoparticles. J Prosthodont 2021; 30 (06) 500-508 Doi: DOI: 10.1111/jopr.13271.
    CrossrefPubMedGoogle Scholar
  • 15 Diaz-Arnold AM, Vargas MA, Shaull KL, Laffoon JE, Qian F. Flexural and fatigue strengths of denture base resin. J Prosthet Dent 2008; 100 (01) 47-51
    CrossrefPubMedGoogle Scholar
  • 16 Ozkir SE, Yilmaz B, Unal SM, Culhaoglu A, Kurkcuoglu I. Effect of heat polymerization conditions and microwave on the flexural strength of polymethyl methacrylate. Eur J Dent 2018; 12 (01) 116-119
    Artikel in Thieme ConnectPubMedGoogle Scholar
  • 17 McCabe J, Walls A. Applied Dental Materials. 8th ed. Oxford: Blackwell Science 2008: 97
  • 18 Ajaj-Alkordy NM, Alsaadi MH. Elastic modulus and flexural strength comparisons of high-impact and traditional denture base acrylic resins. Saudi Dent J 2014; 26 (01) 15-18
    CrossrefPubMedGoogle Scholar
  • 19 Karci M, Demir N, Yazman S. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles. J Prosthodont 2019; 28 (05) 572-579
    CrossrefPubMedGoogle Scholar
  • 20 da Silva LH, Feitosa SA, Valera MC, de Araujo MA, Tango RN. Effect of the addition of silanated silica on the mechanical properties of microwave heat-cured acrylic resin. Gerodontology 2012; 29 (02) e1019-e1023
    CrossrefPubMedGoogle Scholar
  • 21 Gundogdu M, Yanikoglu N, Bayindir F, Ciftci H. Effect of repair resin type and surface treatment on the repair strength of polyamide denture base resin. Dent Mater J 2015; 34 (04) 485-489
    CrossrefPubMedGoogle Scholar
  • 22 International Organization for Standardization. Dentistry- Base Polymers - Part 1: denture base polymers. Volume 20795–1:2008. Geneva: ISO 2013
  • 23 Katsikis N, Zahradnik F, Helmschrott A, Münstedt H, Vital A. Thermal stability of poly (methyl methacrylate)/silica nano- and microcomposites as investigated by dynamic-mechanical experiments. Polym Degrad Stabil 2007; 92 (11) 1966-1976
    CrossrefGoogle Scholar
  • 24 Mussatto CMB, Oliveira EMN, Subramani K, Papaléo RM, Mota EG. Effect of silica nanoparticles on mechanical properties of self-cured acrylic resin. J Nanopart Res 2020; 22 (11) 317
    CrossrefGoogle Scholar
  • 25 Jordan J, Jacob K, Tannenbaum R, Sharaf M, Jasiuk I. Experimental trends in polymer nanocomposites—a review. Mater Sci Eng A 2005; 393 (1–2) 1-11
    CrossrefGoogle Scholar
  • 26 Bera O, Pavličević J, Jovičić M, Stoiljković D, Pilić B, Radičević R. The influence of nanosilica on styrene free radical polymerization kinetics. Polym Compos 2011; 33 (02) 262-266
    CrossrefGoogle Scholar
  • 27 Fragiadakis D, Pissis P, Bokobza L. Glass transition and molecular dynamics in poly(dimethylsiloxane)/silica nanocomposites. Polymer 2005; 46 (16) 6001-6008
    CrossrefGoogle Scholar
  • 28 Revised american dental association specification no. 12 for denture base polymers. J Am Dent Assoc 1975; 90 (02) 451-458
    CrossrefPubMedGoogle Scholar
  • 29 Cunha TR, Regis RR, Bonatti MR. de Souza RF. Influence of incorporation of fluoroalkyl methacrylates on roughness and flexural strength of a denture base acrylic resin. J Appl Oral Sci 2009; 17 (02) 103-107
    CrossrefPubMedGoogle Scholar
  • 30 Balos S, Puskar T, Potran M. et al. Modulus, strength and cytotoxicity of PMMA-silica nanocomposites. Coatings 2020; 10 (06) 583
    CrossrefGoogle Scholar