Variation of Microfibril Angle Between Four Provenances of Sitka Spruce (Picea sitchensis [Bong.] Carr.)

Abstract

The mean microfibril angle (MFA) of tracheids in Sitka spruce (Picea sitchensis [Bong.] Carr.) from four provenances was determined by X-ray diffraction. Seeds were from four locations in North America: California, Oregon, Queen Charlotte Islands and Washington. Transplants were planted in 1976 and grown in Ireland (Shillelagh Forest). The mean MFA close to the pith was ca. 22° and decreased to ca. 11° in the outer rings. It was found that the MFA varies strongly not only as a function of the annual ring and the distance from pith but also as a function of the seed origin. Trees of California and Queen Charlotte Islands provenance had a larger mean MFA in general than trees of Washington and Oregon provenance. Also, the shapes of the cell cross sections were determined to some extent from the diffraction patterns. For samples of California and Washington provenance the average thickness of the cellulose crystallites was determined to be about 3.0 nm.

Wood - microfibril angle - X-ray diffraction - Sitka spruce - Picea sitchensis

References

• 01 Andersson,  S.,, Serimaa,  R.,, Torkkeli,  M.,, Paakkari,  T.,, Saranpää,  P.,, and Pesonen,  E.. (2000);  Microfibril angle of Norway spruce (Picea abies [L.] Karst.) compression wood: comparison of measuring techniques.  Journal of Wood Science. 46 343-349
• 02 Andersson,  S.,, Serimaa,  R.,, Paakkari,  T.,, Saranpää,  P.,, and Pesonen,  E.. (2002);  The crystallinity of wood and the size of cellulose crystallites in Norway spruce (Picea abies [L.] Karst.).  Manuscript in preparation.
• 03 Armstrong,  J. P.,, Kyanka,  G. H.,, and Thrope,  J. L.. (1977);  S2 Fibril angle-elastic modulus relationship of TMP Scotch pine fibres.  Wood Science. 10 (2) 72-80
• 04 Booker,  R. E., and Sell,  J.. (1998);  The nanostructure of cell wall of softwoods and its functions in a living tree.  Holz als Roh- und Werkstoff. 56 1-8
• 05 Cave,  I. D.. (1966);  Theory of X-ray measurement of microfibril angle in wood.  Forest Products Journal. 16 (10) 37-42
• 06 Cave,  I. D.. (1997 a);  Theory of X-ray measurement of microfibril angle in wood, part 1.  Wood Science and Technology. 31 143-152
• 07 Cave,  I. D.. (1997 b);  Theory of X-ray measurement of microfibril angle in wood, part 2.  Wood Science and Technology. 31 225-234
• 08 Cave,  I., and Robinson,  W.. (1998) Measuring microfibril angle distribution in the cell wall by means of X-ray diffraction. Microfibril angle in Wood Proceedings of the IUFRO/IAWA International Workshop on the Influence of Microfibril Angle to Wood Quality. Butterfield, B. G., ed. Canterbury; University of Canterbury Press pp. 94-107
• 09 Cave,  I. D., and Walker,  J. C. F.. (1994);  Stiffness of wood in fast-grown plantation softwoods: the influence of microfibril angle.  Forest Prod. J.. 44 43-48
• 10 Costa e Silva,  J.,, Wellendorf,  H.,, and Pereira,  H.. (1998);  Clonal variation in wood quality and growth in young Sitka spruce (Picea sitchensis [Bong.] Carr.): Estimation of quantitative genetic parameters and index selection for improved pulpwood.  Silvae Genetica. 47 20-33
• 11 Costa e Silva,  J.,, Nielsen,  B. H.,, Rodrigues,  J.,, Pereira,  H.,, and Wellendorf,  H.. (1999);  Rapid determination of the lignin content in Sitka spruce (Picea sitchensis [Bong.] Carr.) wood by Fourier transform infrared spectrometry.   Holzforschung. 53 597-602
• 12 Cowdrey,  D. R., and Preston,  R. D.. (1966);  Elasticity and microfibrillar angle in the wood of Sitka spruce.  Proc. Roy Soc. B.. 166 245-272
• 13 DeLuca,  L. B., and Orr,  R. S.. (1961);  Crystallite orientation and spiral structure of cotton. Part I: Native Cottons.  J. Polymer Sci.. 54 457-470
• 14 Donaldson,  L. A., and Burdon,  R. D.. (1995);  Clonal variation and repeatability of microfibril angle in Pinus radiata. .  New Zealand Journal of Foresty Science. 25 164-174
• 15 Falkenhagen,  E. R.. (1978);  Parent tree variation in Sitka spruce provenances, an example of fine geographic variation.  Silvae Genetica. 27 24-28
• 16 Kantola,  M., and Kähkönen,  H.. (1963);  Small-angle X-ray investigation.  Ann. Acad. Sci. Fenn. A VI Phys.. 137 1-14
• 17 Kantola,  M.,, Kähkönen,  H.,, and Seitsonen,  S.. (1966);  On the correspondence of the small-angle and wide-angle X-ray diffraction patterns of wood fibers.  Ann. Acad. Sci. Fenn. A VI Phys.. 220 1-9
• 18 Lichtenegger,  H.,, Reiterer,  A.,, Stanzl-Tschegg,  S. E.,, and Frantzl,  P.. (1999);  Variation of cellulose microfibril angles in softwood and hardwoods - A possible strategy of mechanical optimization.  J. Struct. Biol.. 128 257-269
• 19 Lindström,  H.,, Evans,  J. W.,, and Verrill,  S. P.. (1998);  Influence of cambial age and growth conditions on microfibril angle in young Norway spruce (Picea abies [L.] Karst.).  Holzforschung. 52 573-581
• 20 Megraw,  R. A.,, Leaf,  G.,, and Bremer,  D.. (1998) Longitudinal shrinkage and microfibril angle in loblolly pine.  Proceedings of the IUFRO/IAWA International Workshop on the Influence of Microfibril Angle to Wood Quality. Butterfield, B. G., ed. Canterbury; University of Canterbury Press pp. 27-61
• 21 Nielsen,  U. B.. (1999) Genetic variation in Sitka spruce (Picea sitchensis [Bong.] Carr.) with respect to height growth, stem form and frost hardiness - investigated on the basis of Danish provenance, progeny and clonal field experiments. Ph.D. thesis. (In Danish)
• 22 Paakkari,  T., and Serimaa,  R.. (1984);  A study of the structure of woods cells by x-ray diffraction.  Wood. Sci. Technol.. 18 79-85
• 23 Sahlberg,  U.,, Salmen,  L.,, and Oscarsson,  A.. (1997);  The Fibrillar Orientation in the S2-layer of wood fibers as determined by X-ray diffraction analysis.  Wood Science and Technology. 31 77-86
• 24 Saranpää,  P.,, Serimaa,  R.,, Andersson,  S.,, Pesonen,  E.,, Suni,  T.,, and Paakkari,  T.. (1998) Variation of microfibril angle of Norway spruce (Picea abies [L.] Karst.) and Scots pine (Pinus sylvestris L.) - comparing X-ray diffraction and optical methods. Microfibril angle in Wood. Proceedings of the IUFRO/IAWA International Workshop on the Influence of Microfibril Angle to Wood Quality. Butterfield, B. G., ed. Canterbury; University of Canterbury Press pp. 240-252
• 25 Saranpää,  P.,, Pesonen,  E.,, Sarén,  M.,, Andersson,  S.,, Siiriä,  S.,, Serimaa,  R.,, and Paakkari,  T.. (2000) Variation of the properties of tracheids in Norway spruce (Picea abies [L.] Karst.). Cell and Molecular Biology of Wood Formation. Savige, R. A., Barnett, J. R., Napier, R., eds. Guilford; BIOS Scientific Publishers Ltd. pp. 337-345
• 26 Sarén,  M.,, Serimaa,  R.,, Andersson,  S.,, Paakkari,  T.,, Saranpää,  P.,, and Pesonen,  E.. (2002);  Structural variation of tracheids in Norway spruce (Picea abies [L.] Karst.).  J. Struct. Biol.. in press
• 27 Savill,  P. S., and Sandels,  A. J.. (1983);  The influence of early respacing on the wood density of Sitka spruce.  Forestry. 56 109-120
• 28 Sugiyama,  J.,, Vuong,  R.,, and Chanzy,  H.. (1991);  Electron diffraction study on the two crystalline phases occuring in native cellulose from algal cell wall.  Macromolecules. 24 4168-4175
• 29 Treacy,  M.,, Evertsen,  J.,, and Ní Dhubháin,  Á.. (2000) A comparison of the mechanical and physical wood properties of a range of Sitka spruce provenances. National Council for Forest Research and Development COFORD 35 p.
• 30 Wainhouse,  D., and Ashburner,  R.. (1996);  The influence of genetic and environmental factors on a quantitative defensive trait in Spruce.  Functional Ecology. 10 137-143
• 31 Whetten,  R., and Sederoff,  R.. (1991);  Genetic engineering of wood.  Forest Ecology and Management. 43 301-316
• 32 Zobel,  B. J., and Jett,  J. B.. (1995) Genetics of wood production. Berlin; Springer-Verlag pp. 13-16

Section Editor: A. M. C. Emons