Zusammenfassung
Einleitung: Die aseptische Lockerung von zementierten Knieendoprothesen ist ein ungelöstes Problem. Diesbezü glich ist vor allem eine hydrolysestabile Verbundfestigkeit der Grenzschicht Metall- Knochenzement von entscheidender Bedeutung. Material und Methodik: Mittels Silikatisierung/Silanisierung beschichtete Tibiakomponenten vom Typ „Columbus PS” wurden in „Technovitkunstknochen” zementiert implantiert und anschließend in NaCl-Lösung (0,9 %) ausgelagert. Es folgte die dynamische Belastung im Knieprüfstand angelehnt an DIN ISO 14243. Anschließend wurden die Prüfkörper in 10 vertikale Scheiben parallel zur Schaftachse geschnitten. Die Interface- (Spaltlänge/-breite) und die Zementmantelanalyse (Rissbildung) erfolgte mittels Auflicht- und Fluoreszenzmikroskopie. Verglichen wurden diese Daten mit analog getesteten unbeschichteten „Columbus PS”-Prothesen. Dynamisch unbelastete beschichtete und unbeschichtete Prothesen dienten als Kontrollgruppe. Ergebnisse: Die silikatisiert/silanisiert beschichteten Prothesen zeigten verglichen mit den unbeschichteten Prothesen eine statistisch hoch signifikante Reduktion von Rissbildung im Zementmantel (p < 0,01) sowie eine statistisch signifikante Reduktion von Spaltbildung im Interface Metall-Knochenzement (p < 0,05). Zusammenfassung: Durch die Oberflächenbeschichtung mittels Silikatisierung/Silanisierung von zementierten Tibiakomponenten kann ein hydrolytisches Debonding im Interface Metall-Knochenzement mit nachfolgender mechanischer Zementmantel-Zerrüttung deutlich reduziert werden. Klinisch könnte dies eine längerfristige Stabilität des Metall-Zement-Verbundes mit reduzierter aseptischer Lockerungsrate bedeuten.
Abstract
Introduction: The aseptic loosening of cemented total knee arthroplasties is still an unsolved problem. In this regard, the hydrolysis resistance in the metal-to-bone cement interface is of major importance. Material and Methods: Cemented pre-treated tibia components coated by means of a silica/silane interlayer system of the model “Columbus PS” were dynamically loaded with the help of a knee-simulator similar to DIN ISO 14243. After loading, the components were microscopically analysed concerning debonding in the metal-to-bone cement interface as well as with regard to cement mantle defects. These data were matched with uncoated “Columbus PS” components. Unloaded coated and uncoated tibia components acted as a control. Results: In comparison with uncoated tibia components, the pre-treated and coated ones yielded a highly significant reduction of cement defects (p < 0.01) as well as a significant reduction of debonding in the metal-to-bone cement interface (p < 0.05). Conclusion: By means of the silica/silane interlayer system for cemented tibia components, a hydrolytic debonding in the metal-to-bone cement interface with subsequent mechanical loosening and consecutive early cement mantle failure can be significantly reduced. This could lead to an increased long-term stability of the metal-to-bone cement compound with decreased aseptic loosening in clinical use.
Schlüsselwörter
zementierte Knieendoprothese - Debonding - aseptische Lockerung - Interface
Key words
cemented total knee arthroplasty - debonding - aseptic loosening - interface
Literatur
1
Berger R A, Rosenberg A G, Barden R M, Sheinkop M B, Jacobs J J, Galante J O.
Long-term followup of the Miller-Galante total knee replacement.
Clin Orthop.
2001;
388
58-67
2
Ritter M E, Berend M E, Meding J B, Keating E M, Faris P M, Crites B M.
Long-term followup of anamtomic graduated components posterior cruciate-retaining total knee replacement.
Clin Orthop.
2001;
388
51-57
3
Summer D R, Jacobs J J, Turner T M, Urban R M, Galante J O.
The amount and distribution of bone ingrowth in tibial components retrieved from human patients.
Trans Orthop Res Soc.
1989;
14
375
4
Volz R G, Nisbet J K, Lee R W, McMurty M G.
The mechanical stability of various noncemented tibial components.
Clin Orthop.
1988;
226
38-42
5
Rosenberg A G, Barden R M, Galante J O.
Cemented and ingrowth fixation of the Miller-Galante prosthesis.
Clin Orthop.
1990;
260
71-79
6
Ritter M A, Faris M P, Keating E M.
Postoperative alignment of total knee replacement: Its effect on survival.
Clin Orthop.
1994;
299
153-156
7
Revell P A.
Tissue reactions to joint prostheses and the products of wear and corrosion.
Curr Top Pathol.
1982;
71
73-101
8
Herren T, Remagen W, Schenk R.
Histologie der Implantat-Knochengrenze bei zementierten und nicht-zementierten Endoprothesen.
Orthopäde.
1987;
16
239-251;
9
Andriacchi T P, Yoder D, Conley A.
Patellofemoral design influences function following total knee arthroplasty.
J Arthroplasty.
1997;
12
243-249
10
Berger R A, Crossett L S, Jacobs J J.
Malrotation causing patellofemoral complications after total knee arthroplasty.
Clin Orthop.
1998;
356
144-153
11
Bartel D L, Burstein A H, Santavicca E A, Insall J N.
Performance of the tibial component in total knee replacement.
J Bone Joint Surg [Am].
1982;
64
1026-1033
12
Ducheyne P, Kagan A, Lacey J A.
Failure of total knee arthroplasty due to loosening and deformation of the tibial component.
J Bone Joint Surg [Am].
1978;
60
384-391
13
Byrick R J, Bell R S, Kay J C, Waddell J P, Mullen J B.
High-volume, high-pressure pulsatile Lavage during cemented arthroplasty.
J Bone Joint Surg [Am].
1989;
71
1331-1336
14
Lindberg J, Dorr L, Malluche H.
Cement fixation of the total condylar tibial component.
Trans Orthop Res Soc.
1982;
7
374
15
Ritter M A, Herbst S A, Keating E M, Faris P M.
Radiolucency at the bone-cement interface in total knee replacement.
J Bone Joint Surg [Am].
1994;
76
60-65
16
Ecker M L, Lotke P A, Windsor R E, Cella J P.
Long-term results after total condylar knee arthroplasty. Significance of radiolucent lines.
Clin Orthop.
1987;
216
151-158
17
Erli H J, Marx R, Paar O, Niethard F U, Weber M, Wirtz D C.
Surface pretreatments for medical application of adhesion.
BioMedical Engineering Online.
2003;
2
15
18
Brewis D M, Comyn J, Tegg J L.
The durability of some epoxide adhesive-bonded joints on exposure to moist warm air.
Int J Adhesion and Adhesives.
1980;
1
35-39
19
Marx R.
Grundlagen der Klebetechnik.
ZWR.
1986;
95
226-229
20 Wirtz D C. Eine neue Beschichtungsmethode für zementierte Femurschaftimplantate zur hydrolysestabilen Optimierung des Metall-Knochenzement-Verbundes. Habilitationsschrift; Aachener Beiträge zur Medizin Band 25, Wissenschaftsverlag Mainz 2002
21 Marx R, Fischer H. Werkstück und Verfahren zum Herstellen und zum Verwerten des Werkstücks. München: DE-Patent 19 937 864, EU-Patent 1 202 702, US Patent 10/049,435
22
Kuster M S, Wood G A, Stachowiak G W, Gächter A.
Joint Load Considerations in Total Knee Replacement.
J Bone Joint Surg [Br].
1997;
79
109-113
23
Andriacchi T P, Andersson G B, Fermier R W, Stern D, Galante J O.
A Study of Lower-Limb Mechanics during Stair-Climbing.
J Bone Joint Surg [Am].
1980;
62
749-757
24
Lewis J L, Askew M J, Jaycox D P.
A comparative evaluation of tibial component designs of total knee prostheses.
J Bone Joint Surg [Am].
1982;
64
129-135
25
Rakotomanana R L, Leyraz P F, Curnier A, Heegaard J H, Rubin P J.
A finite element model for evaluation of tibial prosthesis-bone interface in total knee replacement.
J Biomechanics.
1992;
25
1413-1424
26
Beaupre G S, Vasu R, Carter D R, Schurman D J.
Epiphyseal-based designs for tibial plateau components - II. Stress analysis in the sagittal plane.
J Biomechanics.
1986;
19
663-673
27 Lee A JC. The time-dependent properties of polymethyacrylate bone cement: the interaction of shape of the femoral stems, surface finish and bone cement. In: Learmonth IA (ed). Interfaces in arthroplasty. Springer, London 2000
28 Willert H G. Die Zerrüttung des Zementköchers. In: Willert HG, Buchhorn G (Hrsg). Knochenzement - Werkstoff, klinische Erfahrungen, Weiterentwicklungen. Hans Huber Verlag, Bern 1987
29 Müller K. Mechanische Eigenschaften nicht-modifizierter Knochenzemente auf PMMA-Basis. In: Willert HG, Buchhorn G (Hrsg). Knochenzement - Werkstoff, klinische Erfahrungen, Weiterentwicklungen. Hans Huber Verlag, Bern 1987
30
Verdonschot N, Huiskes R.
Cement debonding process of total hip arthroplasty stems.
Clin Orthop.
1997;
336
297-307
31
Lennon A B, Prendergast P J.
Evaluation of cement stresses in finite element analyses of cemented orthopaedic implants.
J Biomechanical Eng.
2001;
123
623-628
32
Marx R.
Ursachen für das Versagen von Klebeverbindungen bei Adhäsivbrücken.
Schweiz Monatssch Zahnmed.
1987;
97
1081-1086
33
Knight J L, Atwater R D, Grothaus L.
Clinical results of the modular porous-coated anatomic (PCA) total knee arthroplasty with cement: a 5-year prospective study.
Orthopedics.
1997;
20
1025-1033
34
Uematsu O, Hsu P H, Kelley K M, Ewald F C, Walker P S.
Radiographic study of kinematic total knee arthroplasty.
J Arthroplasty.
1985;
2
317-326
35 Willert H G. Die Zerrüttung des Zementköchers. In: Willert HG, Buchhorn G (Hrsg). Knochenzement - Werkstoff, klinische Erfahrungen, Weiterentwicklungen. Hans Huber Verlag, Bern 1987
36
Lennon A B, Prendergast P J.
Evaluation of cement stresses in finite element analyses of cemented orthopaedic implants.
J Biomechanical Eng.
2001;
123
623-628
Dr. med. T. Mumme
Orthopädische Klinik · Universitätsklinikum Aachen
Pauwelsstr. 30
52074 Aachen
Germany
Phone: 02 41/8 08 94 10
Fax: 02 41/8 08 25 07
Email: Torsten.Mumme@GMX.de