Int J Sports Med 1997; 18(8): 600-606
DOI: 10.1055/s-2007-972688
Training and Testing

© Georg Thieme Verlag Stuttgart · New York

Measurement of the Power Output During the Acceleration Phase of All-Out Arm Cranking Exercise

M. Vanderthommen1 , M. Francaux1 , D. Johnson2 , M. Dewan2 , Y. Lewyckyj2 , X. Sturbois1
  • 1Department of Physical Education and Rehabilitation, The Catholic University of Louvain, Louvain-la-Neuve, Belgium
  • 2Department of Mechanical Engineering, The Catholic University of Louvain, Louvain-la-Neuve, Belgium
Weitere Informationen

Publikationsverlauf

Publikationsdatum:
09. März 2007 (online)

The purpose of this study was to develop an origlinal friction loaded ergometer allowing measurement of the resisting torque (Mb) and the angular velocity (ω) by means off a force transducer and an optical pick-up during all-out arm cranking exercises. Taking into account the kinetic energy variations of the flywheel, the peak power developed at the crank (Pc peak) and the peak angular velocity (ωpeak) were determined in 6 male and 6 female able-bodied subjects during 6 - 8 bouts of 3 s duration, performed at maximal velocity, with Mb varying from 0.07 to 0.87 Nm · kg-1. In each subject, the Mb increase was related to a decrease of ωpeak. This relationship was expressed through a negative linear regression (0.92 < R2 < 0.99) for ωpeak between 13 and 28 rad · s-1 for the males and 10 and 24 rad · s-1 for the females. The relationship between Pc peak and Mb did not fit well for all subjects (0.01 < R2 < 0.93) with a parabolic equation, indicating that for upper limb testing, the maximal power should be defined as the highest power measured during several bouts performed with appropriate resisting torque. The present study also demonstrated the importance of taking into account the inertia of the moving flywheel during the acceleration phase of an all-out arm crank exercise, when determining the peak power output.