A Metal-Free and Microwave-Assisted Efficient Synthesis of Diaryl Sulfones

Dalip Kumar; V. Arun; Meenakshi Pilania; K. P. Chandra Shekar

doi:10.1055/s-0032-1317803

Synlett, Inhaltsverzeichnis

Synlett 2013; 24(7): 831-836
DOI: 10.1055/s-0032-1317803

letter

A Metal-Free and Microwave-Assisted Efficient Synthesis of Diaryl Sulfones

Dalip Kumar*

Department of Chemistry, Birla Institute of Technology and Science, Pilani 333031, Rajasthan, India Fax: +44(113)343 6565 eMail: dalipk@pilani.bits-pilani.ac.in

,

V. Arun

Department of Chemistry, Birla Institute of Technology and Science, Pilani 333031, Rajasthan, India Fax: +44(113)343 6565 eMail: dalipk@pilani.bits-pilani.ac.in

,

Meenakshi Pilania

Department of Chemistry, Birla Institute of Technology and Science, Pilani 333031, Rajasthan, India Fax: +44(113)343 6565 eMail: dalipk@pilani.bits-pilani.ac.in

,

K. P. Chandra Shekar

Department of Chemistry, Birla Institute of Technology and Science, Pilani 333031, Rajasthan, India Fax: +44(113)343 6565 eMail: dalipk@pilani.bits-pilani.ac.in

› Institutsangaben

Abstract

Alle Artikel dieser Rubrik

Abstract

An efficient and general protocol for the synthesis of diaryl sulfones via the metal-free coupling of readily available diaryliodonium salts and arenesulfinates in PEG-400 under microwave irradiation has been developed. Utilizing this metal-free and eco-friendly protocol, we have prepared various diaryl sulfones in high yields and shorter reaction times under mild conditions. Furthermore, the coupling of diaryliodonium with arenesulfinate salts with and without copper iodide provides a convenient access to various diaryl sulfones with high selectivity.

Key words

diaryl sulfones - diaryliodonium salts - arenesulfinate salts - microwave irradiation - polyethylene glycol (PEG-400)

Volltext

Referenzen

References and Notes
1 The Chemistry of Sulfones and sulfoxides. Patai S, Rappoport Z, Stirling CJ. M. Wiley; New York: 1988
2 Sturino CF, O’Neill G, Lachance N, Boyd M, Berthelette C, Labelle M, Li L, Roy B, Scheigetz J, Tsou N, Aubin Y, Bateman KP, Chauret N, Day SH, Lévesque J.-F, Seto C, Silva JH, Trimble LA, Carriere M.-C, Denis D, Greig G, Kargman S, Lamontagne S, Mathieu M.-C, Sawyer N, Slipetz D, Abraham WM, Jones T, McAuliffe M, Piechuta H, Nicoll-Griffith DA, Wang Z, Zamboni R, Young RN, Metters KM. J. Med. Chem. 2007; 50: 794
3 Gopalsamy A, Shi M, Stauffer B, Bahat R, Billiard J, Ponce-de-Leon H, Seestaller-Wehr L, Fukayama S, Mangine A, Moran R, Krishnamurthy G, Bodine P. J. Med. Chem. 2008; 51: 7670
4 Graybill BM. J. Org. Chem. 1967; 32: 2931
5 Gilman H, Beaber NJ, Myers CH. J. Am. Chem. Soc. 1925; 47: 2047

6a Zhu W, Ma D. J. Org. Chem. 2005; 70: 2696
6b Cacchi S, Fabrizi G, Goggiamani A, Parisi LM. Org. Lett. 2002; 4: 4719

7 Bandgar BP, Bettigeri SV, Phopase J. Org. Lett. 2004; 6: 2105
8 Kar A, Sayyed IA, Lo WF, Kaiser HM, Beller M, Tse MK. Org. Lett. 2007; 9: 3405
9 Tao Z, Zhen C. J. Chem. Res. 2000; 474

10a Dallinger D, Kappe CO. Chem. Rev. 2007; 107: 2563
10b Poshettiwar V, Varma RS. Acc. Chem. Res. 2008; 41: 629

11 Merritt EA, Olofsson B. Angew. Chem. Int. Ed. 2009; 48: 9052

12a Jalalian N, Ishikawa EE, Silva LF, Olofsson B. Org. Lett. 2011; 13: 1552
12b Petersen TB, Khan R, Olofsson B. Org. Lett. 2011; 13: 3462

13 Vaddula BR, Varma RS, Leazer J. Eur. J. Org. Chem. 2012; 6852
14 Guo F, Wang L, Wang P, Yu J, Han J. Asian J. Org. Chem. 2012; 1: 218
15 Wang B, Qin L, Neumann KD, Uppaluri S, Cerny RL, DiMagno SG. Org. Lett. 2010; 12: 3352
16 Ciana C.-L, Phipps RJ, Brandt JR, Meyer F.-M, Gaunt MJ. Angew. Chem. Int. Ed. 2011; 50: 458
17 Beletskaya IP, Davydov DV, Moreno-Mañas M. Tetrahedron Lett. 1998; 39: 5621
18 Wen J, Zhang R.-Y, Chen S.-Y, Zhang J, Yu X.-Q. J. Org. Chem. 2011; 77: 766
19 Phipps RJ, McMurray L, Ritter S, Duong HA, Gaunt MJ. J. Am. Chem. Soc. 2012; 134: 10773
20 Castro S, Fernandez JJ, Vicente R, Fananas FJ, Rodriguez F. Chem. Commun. 2012; 48: 9089
21 Vaddula BR, Saha A, Leazer J, Varma RS. Green. Chem. 2012; 14: 2133
22 Vaddula BR, Kumar D. Synthesis 2010; 1687
23 General Procedure for the Synthesis of Diaryl Sulfones 5 The diaryliodonium salts were prepared according to the reported methods.²⁹ A mixture of diaryliodonium salt 3a–h (0.2 mmol) and arenesulfinate salt 4a–c (0.2 mmol) in PEG-400 (0.1 mL) was placed in a sealed microwave vial and irradiated in MW (power 200 W) at 50 °C for 10 min. After completion, H₂O (1 mL) was added, and the reaction mixture was extracted with EtOAc (3 × 5 mL). The combined organic extract was washed with H₂O (4 mL) and dried over anhyd Na₂SO₄. The solvent was evaporated in vacuo, the solid thus obtained was washed with hexane and dried to afford 8a–m in high yields.
24 General Procedure for the Copper-Catalyzed Preparation of Diaryl Sulfones 5 A mixture of diaryliodonium salts 3e–g (0.2 mmol) and sodium p-toluenesulfinate 4a (0.2 mmol) in PEG-400 (0.1 mL). A catalytic amount of CuI (10 mol%) was added, and the reaction mixture was placed in a sealed microwave vial and irradiated in MW (power 200 W) at 50 °C for 15 min. After completion of the reaction, 20% Na₂CO₃ solution (2 mL) was added. The aqueous layer was extracted with EtOAc (3 × 5 mL), washed with H₂O (7 mL), and dried over anhyd. Na₂SO₄. The solvents were evaporated under reduced pressure, and the residue so obtained was purified by column chromatography on silica gel (100–120 mesh) eluting with hexane–EtOAc (4:1) afforded the desired diaryl sulfones 5. Spectral Data for Selected Compounds
Phenyl Tolyl Sulfone (5a) Yield 96%; white solid; mp 119–121 °C (lit.⁷ mp 119–122 °C). IR (KBr): 1303, 1149 cm^–1. ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.36 (s, 3 H), 7.34 (d, 2 H, J = 8.0 Hz), 7.58–7.50 (m, 3 H), 7.76 (d, 2 H, J = 8.1 Hz), 7.87 (d, 2 H, J = 7.3 Hz). ESI-MS: m/z calcd for C₁₃H₁₃O₂S [M + H]⁺: 233.1; found: 233.1. Bistolyl Sulfone (5b) Yield 92%; white solid; mp 157–159 °C (lit.⁷ mp 158–159 °C). IR (KBr): 1288, 1149 cm^–1. ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.35 (s, 6 H,), 7.29 (d, 4 H, J = 8.0 Hz), 7.72 (d, 4 H, J = 7.7 Hz), ESI-MS: m/z calcd for C₁₄H₁₅O₂S [M + H]⁺: 247.1; found: 247.2. p -Bromophenyl Tolyl Sulfone (5c) Yield 82%; white solid; mp 131–133 °C (lit.¹ mp 132–134 °C). IR (KBr): 1319, 1149 cm^–1. ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.36 (s, 3 H) 7.38 (d, 2 H, J = 8.1 Hz), 7.62 (d, 2 H, J = 8.6 Hz), 7.83–7.74 (4 H, m). ESI-MS: m/z calcd for C₁₃H₁₂BrO₂S [M + H]⁺: 313.0; found: 313.0. p -Chlorophenyl Tolyl Sulfone (5d) Yield 83%; white solid; mp 116–118 °C (lit.¹ mp 119–120 °C). IR (KBr): 1319, 1149 cm^–1. ESI-MS: m/z calcd for C₁₃H₁₂ClO₂S [M + H]⁺: 267.0; found: 267.1. 2,4,6-Trimethylphenyl Tolyl Sulfone (5e) Yield 89%; white solid; mp 116–117 °C (lit.³⁰ mp 115–117 °C). ¹³C NMR (100 MHz, DMSO-d ₆): δ = 143.18, 142.89, 139.90, 139.07, 133.60, 131.84, 129.25, 125.67, 22.18, 21.03, 20.42. ESI-MS: m/z calcd for C₁₆H₁₉O₂S [M + H]⁺: 275.1; found: 275.2. p -Tolylsulfonylbenzoic Acid (5f) Yield 91%; white solid; mp 120–121 °C. IR (KBr): 3055-2553, 1689, 288, 1157 cm^–1. ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.33 (3 H, s,), 7.31 (2 H, d, J = 7.5 Hz), 7.76 (2 H, d, J = 7.5 Hz), 7.93 (2 H, d, J = 7.9 Hz), 8.07 (2 H, d, J = 7.7 Hz). ¹³C NMR (100 MHz, DMSO-d ₆): δ = 165.94, 144.85, 144.37, 137.27, 134.90, 130.13, 129.85, 127.35, 127.01, 20.67. p -Fluorophenyl Tolyl Sulfone (5g) Yield 88%; white solid; mp 85–87 °C (lit.¹ mp 85–86 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.35 (s, 3 H), 7.47–7.42 (m, 4 H), 7.85 (d, 2 H, J = 6.6 Hz), 8.04 (dd, 2 H, J = 9.0, 5.1 Hz). Diphenyl Sulfone (5h) Yield 88%; white solid; mp 128–130 °C (lit.⁷ mp 127–129 °C). IR (KBr): 1303, 1149 cm^–1. ¹H NMR (400 MHz, DMSO-d ₆): δ = 7.59–7.51 (m, 6 H), 7.89 (d, 4 H, J = 8.6 Hz). p -Chlorophenyl Phenyl Sulfone (5j) Yield 96%; white solid; mp 77–79 °C (lit.³⁰ mp 77–78 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 7.64 (d, 2 H, J = 7.8 Hz), 7.71 (d, 3 H, J = 8.6 Hz), 7.98 (d, 4 H, J = 8.2 Hz). ESI-MS: m/z calcd for C₁₂H₁₀ClO₂S [M + H]⁺: 253.0; found: 253.1. 2,4,6-Trimethylphenyl Phenyl Sulfone (5k) Yield 91%; white solid; mp 78–80 °C (lit.³⁰ mp 79–81 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.30 (s, 3 H), 2.56 (s, 6 H), 7.11 (s, 2 H), 7.42 (t, 2 H, J = 7.8 Hz), 7.53 (t, 1 H, J = 7.4 Hz), 7.73 (d, 2 H, J = 7.7 Hz). ¹³C NMR (100 MHz, DMSO-d ₆): δ = 143.33, 141.25, 133.16, 131.58, 131.30, 129.72, 121.68, 113.42, 26.45, 20.21. ESI-MS: m/z calcd for C₁₅H₁₇O₂S [M + H]⁺: 261.1; found: 261.1 2-Thienyl Tolyl Sulfone (5l) Yield 82%; white solid; mp 116–118 °C (lit.⁷ mp 118–120 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.34 (s, 3 H), 7.30 (d, 2 H, J = 8.0 Hz), 7.50–7.46 (m, 2 H, J = 7.4 Hz), 7.75 (d, 2 H, J = 8.0 Hz), 7.84 (d, 1 H, J = 7.5 Hz). Methyl Phenyl Sulfone (5m) Yield 83%; white solid; mp 145–146 °C (lit.⁸ mp 144–145 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 3.12 (s, 3 H), 7.63 (t, 2 H, J = 8.17 Hz), 7.71 (t, 1 H, J = 5.4 Hz), 7.94 (d, 2 H, J = 7.2 Hz). Methyl p-Tolyl Sulfone (5n) Yield 83%; white solid: mp 87 °C (lit.^6a mp 144–145 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 2.44 (s, 3 H), 3.12 (s, 3 H), 7.43 (d, 2 H, J = 8.0 Hz), 7.80 (d, 2 H J = 8.1 Hz). Methyl p-Methoxyphenyl Sulfone (5p) Yield 84%; white solid: mp 119 °C (lit.^6a mp 118–120 °C). ¹H NMR (400 MHz, DMSO-d ₆): δ = 3.10 (s, 3 H), 3.87 (s, 3 H), 7.12 (d, 2 H, J = 8.8 Hz), 7.85 (d, 2 H, J = 8.8 Hz).
25 Chen J, Spears SK, Huddleston GJ, Rogers RD. Green Chem. 2005; 7: 64
26 Ochiai M. Topics in Current Chemistry. Vol. 224. Chap. 3 Springer; Berlin/Heidelberg: 2002

27a Phipps RJ, Grimster NP, Gaunt MJ. J. Am. Chem. Soc. 2008; 130: 8172
27b Phipps RJ, Gaunt MJ. Science 2009; 323: 1593
27c Bigot A, Williamison AE, Gaunt MJ. J. Am. Chem. Soc. 2011; 133: 13778
27d Harvey JS, Simonovich SP, Jamison CR, MacMillan DW. C. J. Am. Chem. Soc. 2011; 133: 13782
27e Chen B, Hou X.-L, Li Y.-X, Wu Y.-D. J. Am. Chem. Soc. 2011; 133: 7668

28 Umierski N, Manolikakes G. Org. Lett. 2013; 15: 188

29a Bielawski M, Zhu M, Olofsson B. Adv. Synth. Catal. 2007; 349: 2610
29b Kraszkiewicz L, Skulski L. Synthesis 2008; 2373

30 Singh RP, Kamble RM, Chandra KL, Saravanan P, Singh VK. Tetrahedron 2001; 57: 241

Zusatzmaterial

Supporting Information