Subscribe to RSS
DOI: 10.1055/s-0036-1591883
Access to 5(6→7)abeo-Steroids through Benzilic Acid Rearrangement of i-Steroids
Publication History
Received: 29 October 2017
Accepted after revision: 07 December 2017
Publication Date:
18 January 2018 (online)
Dedicated to Barbara, Kurt, and Konrad Krieger
Published as part of the Bürgenstock Special Section 2017 Future Stars in Organic Chemistry
Abstract
Benzilic acid rearrangement of i-steroid ketones and their subsequent opening gives access to 5(6→7)abeo-steroids. The functional group tolerance is demonstrated by several examples, including substrates with additional olefinic groups. The method opens a potential route to the synthesis of complex natural products such as solanioic acid from abundant steroid starting materials like ergosterol.
#
Key words
abeo-steroids - benzilic acid rearrangement - i-steroids - natural products - total synthesisAmong the class of steroids, 5(6→7)abeo-steroids constitute a rather small subgroup with only few examples reported as isolated natural products[1] or semisynthetic analogs.[2] In recent years, especially the isolation of solanioic acid (1, Figure [1]), a potent antibacterial natural product isolated from the tubers of Cyperus rotundus, drew some attention because of its intriguing structural complexity.[3] Despite the mentioned 5(6→7)abeo-motif, an additional 11,12-seco-motif is present in its molecular framework, and a biosynthetic rationale may trace back these structural elements to ergosterol as a potential precursor. Another recently isolated example is 3β,5β,6-trihydroxy-B-norsitostane (2, Figure [1]), although no biological activity could be identified so far.[4] 5(6→7)abeo-Steroids have also been known to affect myelin degradation in the central nervous system, a process serving as a clinical hallmark of multiple sclerosis.[5] Atheronal B (3, Figure [1]), thus, modulates misfolding of apolipoprotein B100, β-amyloid protein, α-synuclein, and κ- and λ-antibody light chains. Specifically, 3 forms imines with lysine side chains, a process that effectively reduces the cationic nature of, e.g., the myelin basic protein, which leads to structural changes and a decrease in myelin stability and may contribute to the onset and progression of multiple sclerosis. The biosynthetic origin of atheronal B (3) was subject to some controversy with speculations regarding the possible formation of ozone (O3) in brain tissue and its reaction with, e.g., cholesterol (4, Scheme [1], lower part).[6] Although tempting, neither O3 nor the corresponding ozonides could be detected so far, and it thus appears much more likely that a sequence consisting of the Schenck ene reaction, Hock rearrangement, and aldol addition is operative and leads to the formation of 3 (Scheme [1], 4→5→A→B→3).[7]
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_f1_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s1_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
From a synthetic point of view, ozonolysis is a viable means to convert Δ5-steroids like cholesterol (4) into keto aldehydes (such as atheronal A, 6, Scheme [1]).[8] A limitation to this strategy is the presence of additional double bonds in the starting material. The aldol condensation to forge the B-nor-ring (as in atheronal B, 3, or solanioic acid, 1) was also reported, but suffered equally from low yields, harsh conditions and extended reaction times.[8]
We were facing these problems in our work on analogs of solanioic acid (1), when considering dienes derived from ergosterol (with an additional reactive Δ22 olefin) as intermediates towards the formation of the 5(6→7)abeo-motif. An alternative access to this substructure that does not employ ozonolysis and an aldol reaction (or a related process) could be the benzilic acid rearrangement of diones of type D and F (see Scheme [2]) to first yield α-hydroxy esters (or acids) such as 8 and 12, which would then be transformed to the desired unsaturated products, such as 14. The general viability of the benzilic acid rearrangement of cholesterol-derived 7 was reported by Liang, but suffered from several drawbacks.[9] Since the starting 6,7-diones are typically fleeting species that could not be accessed or isolated in pure form, only autoxidation of 7 under strongly basic conditions (NaH, O2, DMF) for extended periods of time could provide them in situ (Scheme [2], path I, 7→C→D). Trace amounts of water in the reaction mixture may then form hydroxide ions to initiate the benzilic acid rearrangement (D→8), although in rather low efficiency (35% yield reported for 7→8). A byproduct in this reaction was diacid 9, the formation of which can be explained through the competing rearrangement of hydroperoxide C (path II, C→E→9).[9c]
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s2_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
We were, thus, reinvestigating our options to access the required diones as well as their controlled rearrangement. Starting from ergosterol-derived i-steroid 10a,[10] Rubottom oxidation gave access to α-hydroxy ketone 11a (Scheme [2]).[11] Its treatment with excess CuCl then resulted in the formation of the desired dione F, which was not isolated, but immediately underwent benzilic acid rearrangement through nucleophilic attack of MeOH. A similar sequence was previously applied in the synthesis of K252a from staurosporine.[12] α-Hydroxy ester 12a was thus formed as a single product in almost quantitative yield. Methylation of the tertiary alcohol in 12a to yield methyl ether 15 was performed and NOE experiments (cross peak between methoxy group at C7 and H14) resulted in its assignment as 7S. With a high-yielding access to B-nor derivative 12a in hand, we then investigated the crucial i-steroid opening.[13] Gratifyingly, under treatment with BF3·Et2O in AcOH,[14] the cyclopropyl moiety underwent C–C cleavage through the nucleophilic attack of acetate and loss of the hydroxyl moiety at C7 (12a→13a). All that remained was reduction of the methyl ester in 13a and concomitant removal of the acetate (LiAlH4, THF, 66 °C), followed by selective oxidation of the thus-obtained allylic alcohol (MnO2, CH2Cl2) to deliver 14, an A,B-ring mimic of solanioic acid (1).
Since several B-nor-7-oxo-derived positive modulators of the GABAA receptor were reported recently,[2] we also applied our method to the expedient synthesis of this structural motif. Thus, reduction and oxidative cleavage of 12a using 1. LiAlH4 and 2. NaIO4 gave B-nor-i-steroid ketone 16a (Scheme [2]), the cyclopropyl opening of which was realized with H2SO4 in AcOH, followed by acetylation (Ac2O, py) of the partly deacetylated 3-hydroxy moiety to deliver 17a in good yield as a mixture of epimers at C5 (approximately 4:1 ratio, respective stereoconfigurations at C5 were not assigned). Removal of the acetate using KOH in MeOH then gave the desired B-nor-7-oxo steroid 18a. The exact same sequence was repeated for i-steroid ketone 10b [15] derived from commercial sitosterol and gave 13b and 18b, respectively, as the final products in comparably good yields (Scheme [2]).
To further elucidate the generality and functional group tolerance of our method, we synthesized several more i-steroid ketones, some of them previously reported in the literature (10c [16] and 10e,[17] Table [1]) and another one, substrate 10g, prepared as shown in Scheme [3] by a simple sequence starting from dehydroepiandrosterone-derived 19 [18] (sequence 19→20→21→10g), and subjected these starting materials 10 to our three-step sequence (Table [1]). Compounds 11d and 11f were byproducts of the Rubottom oxidation and were formed by treatment with excess TMSOTf and Et3N (during generation of the required silyl enol ethers). Their intentionally incomplete removal during treatment with TBAF allowed for both, the isolation of 11c and 11d, as well as 11e and 11f, and their use in the benzilic acid rearrangement.
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s3_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![]() |
|||||
Entry |
Rβ |
Rα |
Yield [%] of oxidation product 11 (R1 = OH) |
Yield [%] of rearrangement product 12 |
Yield [%] of i-steroid opening product 13 |
1 |
![]() |
H |
11a: 56 (82[11]) |
12a: 94 |
13a: 79 |
2 |
![]() |
H |
11b: 56 |
12b: 88 |
13b: 70 |
3 |
OH |
H |
11c: 37 |
12c: 61 |
13c: 42 |
4 |
OTMS |
H |
11d: 23 |
12c: 83b |
–c |
5 |
OH |
![]() |
11e: 30 |
12e: –d |
–c |
6 |
OTMS |
![]() |
11f: 13 |
12f: –d |
–c |
7 |
![]() |
11g: 38 (recovered 10g: 44%) |
12g: 85 |
13g: –d |
a Reaction conditions: (a) 1. TMSOTf (3.0 equiv), Et3N (4.0 equiv), CH2Cl2, 0 °C, 20 min; 2. mCPBA (1.1 equiv), CH2Cl2, –40 °C, 2 h; (b) CuCl (20 equiv), MeOH, 50 °C, 3–16 h; (c) BF3·Et2O (80 equiv), AcOH (200 equiv), Et2O, 25 °C, 15 h.
b The TMS ether was cleaved during the rearrangement step and the same product as in the unprotected case was obtained.
c Reaction was not performed since the required rearrangement product could not be obtained in the previous step.
d No desired product could be isolated.
As shown in Table [1], most of these substrates successfully underwent the rearrangement. Especially 10a (entry 1, with an additional double bond in the side chain) and 10b (entry 2) were smoothly converted into the desired B-nor-derivatives 12a and 12b, respectively. While a secondary TMS ether could not be retained in the rearrangement step (entry 4) and gave the same product as in the unprotected case (entry 3), a tertiary TMS ether (entry 6) and the corresponding unprotected case (entry 5) led to extensive decomposition with no desired product isolated. This might, however, be attributed to the presence of an alkyne and Meyer–Schuster or Rupe rearrangements occurring under the reaction conditions. Substrate 10g underwent the oxidation and rearrangement steps without incident, but failed to undergo the final i-steroid opening, likely due to Lewis acid-promoted double bond isomerization of the exo double bond into the D ring or Wagner–Meerwein-type rearrangements occurring. In an additional experiment, we lowered the number of equivalents of CuCl in the oxidation/rearrangement step for substrate 10g and observed a much more sluggish reaction and only 21% of rearrangement product 11g being isolated. Interestingly, the major product under these conditions (68% yield) was assigned by 2D NMR spectroscopic analysis to be the assumed intermediate dione 22 (Scheme [4]). This species proved isolable by column chromatography and was stable in pure form for an extended period of time. Replacing MeOH as the solvent in the reaction for non-nucleophilic CH2Cl2 resulted in the recovery of starting material and no formation of either 12g or 22. Dione 22 was found to be capable of reentering the reaction when resubjected to the original conditions (using 25 equiv CuCl) and gave 12g. This result also served as confirmation of the intermediacy of a dione in the mechanistic rationale.
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s4_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
In summary, we herein reported a novel method for the preparation of B-nor-steroids that makes use of a Cu-mediated one-pot oxidation/benzilic acid rearrangement. The substrate scope was explored and the tolerance of our conditions towards additional functionalities was examined. These results will be useful in our ongoing work on solanioic acid analogs and, thus, present an opportunity for biological studies and a deepened understanding of the underlying biology of this class of natural products.
All reactions sensitive to moisture and/or air were carried out using heat-gun dried glassware, an argon atmosphere, and anhyd solvents. Anhyd dichloromethane and diethyl ether were prepared by an M. Braun GmbH MB SPS-800 solvent purification system. Anhyd toluene and methanol were purchased from Acros (extra anhyd quality). Ethyl acetate and n-hexane were purified by distillation on a rotary evaporator. All other solvents and commercially available reagents were used without further purification unless otherwise stated. Reactions were monitored by TLC carried out on Merck Silica Gel 50 F245 plates and visualized by fluorescence quenching under UV light, or an aqueous solution of cerium sulfate and phosphomolybdic acid, or ceric ammonium molybdate (CAM), or an acidic methanolic solution of vanillin and heat as developing agent. Column chromatographic purifications were performed on Macherey-Nagel Silica Gel 60 M (40–60 μm) and preparative TLC was performed on Merck Silica Gel 50 F245-plates. Concentration under reduced pressure was performed by rotary evaporation at 40 °C and the appropriate pressure and subsequent exposure to vacuum (1 × 10–3 mbar) at 25 °C. NMR spectra were recorded on a Jeol ECP500 (500 MHz), Bruker AVANCE III 500 (500 MHz), or Bruker AVANCE III 700 (700 MHz, with CryoProbe) spectrometer. Chemical shifts were calibrated by using the residual undeuterated solvent signals (CDCl3: 1H, δ = 7.26; 13C, δ = 77.16; CD3OD: 1H, δ = 3.31; 13C, δ = 49.00) as internal reference at 298 K and are repoted in ppm. The given multiplicities are phenomenological, thus the actual appearance of the signals is stated and not the theoretically expected one. In case no multiplicity could be identified, the chemical shift range of the signal is given. IR spectra were measured on a Jasco FT/IR-4100 Type A spectrometer with a TGS detector. HRMS was carried out by using an Agilent 6210 ESI-TOF spectrometer. Optical rotations were measured on a JASCO P-2000 polarimeter at 589 nm by using 100 mm cells; the solvent and concentration (g/100 mL) are indicated. Melting points were measured on a Stuart SMP30 melting point apparatus and are uncorrected.
#
α-Hydroxy Ketones 11 by Rubottom Oxidation of 6-Oxo-i-steroids 10; General Procedure A
The appropriate ketone 10 (1.0 equiv) was dissolved in CH2Cl2 (0.1 M) and the solution was cooled to 0 °C. Then Et3N (4.0 equiv) was added followed by dropwise addition of TMSOTf (3.0 equiv) over 20 min. The organic phase was then washed with sat. aq NaHCO3, separated, dried over MgSO4, and filtered. All volatiles were removed under reduced pressure to yield the silyl enol ether as a colorless solid that was used in the next step without further purification.
The silyl enol ether thus obtained was dissolved in CH2Cl2 (0.1 M), and a solution of freshly purified 0.1 M mCPBA in CH2Cl2 (1.1 equiv) was added dropwise at –40 °C. After 2 h, sat. aq Na2SO3 was added and the mixture was stirred for 15 min at 25 °C. The organic phase was washed sequentially with sat. aq NaHCO3, 1 M aq HCl, and sat. brine, dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc) to yield the corresponding α-hydroxy ketone 11 as a colorless solid.
#
α-Hydroxy Ketone 11a
Ketone 10a (221 mg, 0.56 mmol, 1.0 equiv) was processed as described in general procedure A and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 10:1) to yield α-hydroxy ketone 11a as a colorless solid. All analytical data were in agreement with those reported previously.[11]
Yield: 129 mg (0.31 mmol, 56%).
1H NMR (CDCl3, 500 MHz): δ = 5.25–5.13 (m, 2 H), 3.78 (t, J = 3.5 Hz, 1 H), 2.05–2.01 (m, 4 H), 1.90–1.61 (m, 8 H), 1.62–1.56 (m, 3 H), 1.53–1.42 (m, 2 H), 1.34–1.19 (m, 3 H), 1.11–1.06 (m, 1 H), 1.03 (d, J = 6.6 Hz, 3 H), 0.98 (s, 3 H), 0.91 (d, J = 6.9 Hz, 3 H), 0.84–0.80 (m, 6 H), 0.72 (s, 3 H), 0.70 (t, J = 5.0 Hz, 1 H).
#
α-Hydroxy Ketone 11b
Ketone 10b (480 mg, 1.16. mmol, 1.0 equiv) was processed as described in general procedure A and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield α-hydroxy ketone 11b as a colorless solid.
Yield: 288 mg (0.67 mmol, 56%); mp 152–154 °C (CHCl3); [α]D 20 +23.7 (c 1.00, CHCl3); Rf = 0.30 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 3398 (b), 2957 (m), 2869 (w), 2360 (s), 2341 (s), 1675 (w), 1376 (w), 1302 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.78 (s, 1 H), 2.24 (s, 1 H), 2.10–1.98 (m, 2 H), 1.96–1.83 (m, 1 H), 1.82–1.75 (m, 2 H), 1.75–1.62 (m, 3 H), 1.62–1.54 (m, 1 H), 1.52–1.08 (m, 18 H), 0.98 (s, 3 H), 0.93 (d, J = 6.7 Hz, 3 H), 0.86–0.83 (m, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.70 (s, 3 H), 0.69 (m, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 210.6, 73.2, 55.9, 49.5, 47.4, 46.0, 44.3, 39.5, 39.2, 37.7, 37.7, 36.3, 34.0, 33.8, 29.3, 28.4, 26.3, 26.1, 23.6, 23.2, 22.9, 20.0, 19.4, 19.2, 18.9, 12.1, 11.9, 10.8.
HRMS (ESI): m/z [M + Na]+ calcd for C29H48NaO2: 451.3547; found: 451.3556.
#
α-Hydroxy Ketones 11c and 11d
Ketones 11c and 11d were prepared according to general procedure A. Ketone 10c (154 mg, 0.53 mmol, 1.0 equiv) was processed as described in general procedure A and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 7:1→1:1) to yield α-hydroxy ketone 11d (23%) and α-hydroxy ketone 11c (37%), both as colorless solids.
#
11c
Yield: 59 mg (0.2 mmol, 37%); mp 163–164 °C (CHCl3); [α]D 20 +6.4 (c 1.00, CHCl3); Rf = 0.55 (n-hexane–EtOAc, 1:3, CAM [blue]).
IR (neat): 3393 (b), 2995 (m), 2870 (w), 2360 (s), 2341 (s), 1682 (s), 1455 (m), 1375 (m), 1046 (m), 1019 (m), 736 (s) cm–1.
1H NMR (CD3OD, 500 MHz): δ = 3.67 (d, J = 2.2 Hz, 1 H), 3.64 (d, J = 8.7 Hz, 1 H), 2.13–1.99 (m, 3 H), 1.90–1.79 (m, 4 H), 1.77–1.61 (m, 5 H), 1.56–1.44 (m, 2 H), 1.32 (td, J = 11.9, 5.9 Hz, 1 H), 1.13 (td, J = 12.9, 4.1 Hz, 1 H), 1.08–1.02 (m, 1 H), 1.00 (s, 3 H), 0.79 (s, 3 H), 0.69 (t, J = 4.9 Hz, 1 H).
13C NMR (CD3OD, 126 MHz): δ = 211.9, 82.3, 73.5, 45.4, 45.2, 44.3, 44.0, 41.1, 39.2, 37.6, 37.3, 34.6, 30.6, 27.1, 23.5, 23.5, 19.5, 11.4, 10.3.
HRMS (ESI): m/z [M + Na]+ calcd for C19H28NaO3: 327.1931; found: 327.1944.
#
11d
Yield: 46 mg (0.12 mmol, 23%); mp 93–94 °C (CHCl3); [α]D 20 +5.4 (c 1.00, CHCl3); Rf = 0.47 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 2969 (w), 2954 (w), 2359 (s), 2341 (m), 1737 (s), 1682 (w), 1372 (s), 1228 (m), 1216 (s), 840 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.79–3.76 (m, 1 H), 3.63 (t, J = 8.4 Hz, 1 H), 2.34 (s, 1 H), 2.03 (dtd, J = 17.0, 8.2, 4.1 Hz, 1 H), 1.98–1.87 (m, 2 H), 1.84–1.57 (m, 7 H), 1.54–1.43 (m, 2 H), 1.35–1.23 (m, 2 H), 1.12–0.99 (m, 2 H), 0.99 (s, 3 H), 0.90–0.82 (m, 1 H), 0.75 (s, 3 H), 0.71 (t, J = 4.9 Hz, 1 H), 0.08 (s, 9 H).
13C NMR (CDCl3, 126 MHz): δ = 210.6, 81.6, 72.6, 47.3, 44.4, 43.9, 43.1, 39.3, 38.1, 37.9, 36.6, 33.8, 30.8, 26.3, 22.9, 22.5, 19.5, 11.2, 11.0, 0.3.
HRMS (ESI): m/z [M + Na]+ calcd for C21H28NaO3: 399.2326; found: 399.2344.
#
α-Hydroxy Ketones 11e and 11f
Ketones 11e and 11f were prepared according to general procedure A. Ketone 10e (116 mg, 0.37 mmol, 1.0 equiv) was processed as described in general procedure A and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 7:1→4:1) to yield α-hydroxy ketone 11f (13%) as a colorless foam and α-hydroxy ketone 11e (30%) as a colorless solid.
#
11e
Yield: 36 mg (0.11 mmol, 30%); mp 163–164 °C (CHCl3); [α]D 20 –18.6 (c 1.00, CHCl3); Rf = 0.15 (n-hexane–EtOAc, 7:1, CAM [blue]).
IR (neat): 3420 (b), 3305 (m), 2956 (s), 2931 (s), 2871 (m), 2360 (s), 2341 (m), 1675 (s), 1376 (s), 1301 (m), 1252 (m), 1148 (m), 1046 (s), 754 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.77 (d, J = 3.3 Hz, 1 H), 3.47 (s, 1 H), 2.60 (s, 1 H), 2.34 (ddd, J = 13.8, 9.8, 5.6 Hz, 1 H), 2.17 (td, J = 11.8, 7.5 Hz, 1 H), 1.91 (td, J = 11.3, 3.4 Hz, 1 H), 1.86–1.77 (m, 5 H), 1.74–1.72 (m, 4 H), 1.65–1.58 (m, 1 H), 1.46 (qd, J = 13.4, 4.1 Hz, 1 H), 1.35 (qd, J = 12.1, 5.6 Hz, 1 H), 1.06–1.01 (m, 1 H), 0.99 (s, 3 H), 0.89 (s, 3 H), 0.71 (t, J = 5.0 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 210.7, 87.4, 79.8, 74.5, 72.4, 47.2, 46.9, 44.4, 43.7, 39.8, 39.0, 38.0, 37.7, 33.8, 32.4, 26.2, 22.6, 22.5, 19.5, 12.7, 11.1.
HRMS (ESI): m/z [M + Na]+ calcd for C21H28NaO3: 351.1931; found: 351.1935.
#
11f
Yield: 21 mg (0.05 mmol, 13%); mp 81–81.5 °C (CHCl3); [α]D 20 –24.3 (c 1.00, CHCl3); Rf = 0.48 (n-hexane–EtOAc, 7:1, CAM [blue]).
IR (neat): 3386 (b), 3307 (w), 2956 (s), 2872 (m), 2360 (w), 2340 (w), 1677 (s), 1378 (m), 1303 (w), 1248 (s), 1148 (m), 1137 (m), 1087 (s), 917 (m), 890 (m), 842 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.77 (t, J = 3.2 Hz, 1 H), 2.56 (s, 1 H), 2.41 (d, J = 3.8 Hz, 1 H), 2.27 (ddd, J = 13.5, 9.8, 5.4 Hz, 1 H), 2.13 (td, J = 11.6, 7.6 Hz, 1 H), 2.10–2.02 (m, 1 H), 1.99–1.86 (m, 2 H), 1.84–1.54 (m, 9 H), 1.50–1.39 (m, 1 H), 1.32 (qd, J = 12.1, 5.4 Hz, 1 H), 1.05–1.00 (m, 1 H), 0.99 (s, 3 H), 0.81 (s, 3 H), 0.70 (t, J = 5.0 Hz, 1 H), 0.17 (s, 9 H).
13C NMR (CDCl3, 126 MHz): δ = 210.6, 87.8, 80.6, 75.1, 72.6, 47.7, 47.3, 44.4, 42.6, 40.4, 40.0, 37.8, 37.8, 33.8, 32.3, 26.6, 22.8, 22.6, 19.5, 12.7, 11.0, 2.0.
HRMS (ESI): m/z [M + Na]+ calcd for C24H36NaO3Si: 423.2326; found: 423.2331.
#
α-Hydroxy Ketone 11g
Ketone 10g (408 mg, 1.43 mmol, 1.0 equiv) was processed as described in general procedure A and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 15:1→7:1) to yield α-hydroxy ketone 11g (38%) as a colorless foam and recovered ketone 10g (180 mg, 0.63 mmol, 44%).
Yield: 165 mg (0.55 mmol, 38%); mp 63–64.5 °C (CHCl3); [α]D 20 –8.1 (c 1.00, CHCl3); Rf = 0.38 (n-hexane–EtOAc, 9:1, CAM [red]).
IR (neat): 3304 (b), 2959 (s), 2872 (m), 1737 (m), 1693 (s), 1678 (s), 1655 (m), 1452 (w), 1373 (s), 1302 (w), 1216 (w), 1160 (w), 875 (m), 850 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.69–4.64 (m, 2 H), 3.84 (t, J = 2.9 Hz, 1 H), 2.59–2.50 (m, 1 H), 2.49–2.44 (m, 1 H), 2.36–2.26 (m, 1 H), 2.04 (dtd, J = 17.1, 8.1, 4.0 Hz, 1 H), 1.93 (td, J = 11.3, 3.3 Hz, 1 H), 1.88–1.79 (m, 4 H), 1.76–1.64 (m, 4 H), 1.60 (dd, J = 8.3, 5.0 Hz, 1 H), 1.52 (tdd, J = 13.6, 12.1, 4.1 Hz, 1 H), 1.38–1.27 (m, 2 H), 1.08–1.01 (m, 1 H), 1.00 (s, 3 H), 0.83 (s, 3 H), 0.71 (t, J = 5.0 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 210.6, 161.0, 101.3, 73.0, 47.7, 47.3, 44.4, 44.1, 39.2, 38.0, 37.8, 35.3, 33.8, 29.5, 26.3, 23.7, 22.8, 19.5, 18.2, 11.0.
HRMS (ESI): m/z [M + Na]+ calcd for C20H28NaO2: 323.1982; found: 323.1997.
#
Methyl Esters 12 by Oxidation and Benzilic Acid Rearrangement of 7-Hydroxy-6-oxo-i-steroids 11; General Procedure B
The appropriate α-hydroxy ketone 11 (1.0 equiv) was suspended in MeOH (0.04 M) and CuCl (20 equiv) was added. The resulting suspension was stirred at 50 °C for 3–16 h. After cooling to ambient temperature, the suspension was filtered through a plug of Celite, all volatiles were removed under reduced pressure, and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc) to give the corresponding B-nor-α-hydroxy methyl ester 12 as a colorless oil or colorless solid.
#
B-nor-α-Hydroxy Methyl Ester 12a
α-Hydroxy ketone 11a (139 mg, 0.33 mmol, 1.0 equiv) was processed as described in general procedure B and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 12a as a colorless oil.
Yield: 139 mg (0.31 mmol, 94%); [α]D 20 –19.2 (c 1.00, CHCl3); Rf = 0.68 (n-hexane–EtOAc, 7:1, CAM [blue]).
IR (neat): 3524 (w), 2951 (s), 2929 (m), 2866 (s), 1723 (s), 1455 (m), 1379 (m), 1270 (w), 1247 (s), 1215 (m), 1159 (s), 1107 (m), 1097 (m), 1072 (w), 1015 (w), 971 (m), 754 (w) cm–1.
1H NMR (CDCl3, 700 MHz): δ = 5.21–5.14 (m, 2 H), 3.76 (s, 3 H), 2.87 (s, 1 H), 2.29 (t, J = 11.5 Hz, 1 H), 2.07–1.99 (m, 1 H), 1.97 (dt, J = 12.5, 3.0 Hz, 1 H), 1.84 (td, J = 6.9, 5.8 Hz, 1 H), 1.74–1.56 (m, 5 H), 1.52–1.43 (m, 4 H), 1.40–1.33 (m, 2 H), 1.27–1.12 (m, 4 H), 1.02 (d, J = 6.6 Hz, 3 H), 0.93 (s, 3 H), 0.90 (d, J = 6.8 Hz, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.68 (s, 3 H), 0.54 (t, J = 5.4 Hz, 1 H), 0.50 (dd, J = 8.8, 5.5 Hz, 1 H).
13C NMR (CDCl3, 176 MHz): δ = 178.5, 136.0, 132.0, 80.5, 55.3, 53.0, 52.0, 50.7, 50.4, 50.3, 50.0, 44.7, 43.0, 40.1, 39.1, 34.2, 33.3, 28.9, 25.9, 24.0, 23.6, 21.8, 21.3, 20.1, 19.8, 18.5, 17.8, 12.9, 11.5.
HRMS (ESI): m/z [M + Na]+ calcd for C29H46NaO3: 465.3339; found: 465.3345.
#
B-nor-α-Hydroxy Methyl Ester 12b
α-Hydroxy ketone 11b (202 mg, 0.47 mmol, 1.0 equiv) was processed as described in general procedure B and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 12b as a colorless oil.
Yield: 190 mg (0.41 mmol, 88%); [α]D 20 +13.1 (c 1.00, CHCl3); Rf = 0.57 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 2950 (s), 2934 (s), 2865 (s), 1724 (s), 1462 (m), 1378 (m), 1271 (w), 1247 (s), 1215 (w), 1159 (m), 1108 (w), 1049 (w), 954 (m), 754 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.77 (s, 3 H), 2.88 (s, 1 H), 2.28 (t, J = 11.4 Hz, 1 H), 2.01 (dt, J = 12.6, 3.0 Hz, 1 H), 1.87 (dddd, J = 15.3, 13.3, 9.1, 5.7 Hz, 2 H), 1.72 (dd, J = 14.0, 9.4 Hz, 1 H), 1.69–1.61 (m, 3 H), 1.56 (s, 1 H), 1.52–1.44 (m, 3 H), 1.39–1.30 (m, 3 H), 1.30–1.20 (m, 3 H), 1.19–1.10 (m, 3 H), 1.07–0.95 (m, 2 H), 0.94–0.92 (m, 8 H), 0.84–0.80 (m, 6 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.67 (s, 3 H), 0.54 (t, J = 5.4 Hz, 1 H), 0.50 (dd, J = 8.8, 5.5 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 178.6, 80.5, 55.2, 53.0, 52.0, 50.7, 50.4, 50.2, 50.0, 46.0, 44.7, 39.2, 36.2, 34.2, 34.2, 29.3, 28.8, 26.2, 25.9, 24.0, 23.6, 23.2, 21.9, 19.9, 19.2, 19.0, 18.5, 12.6, 12.1, 11.5.
HRMS (ESI): m/z [M + Na]+ calcd for C30H50NaO3: 481.3652; found: 481.3659.
#
B-nor-α-Hydroxy Methyl Ester 12c
α-Hydroxy ketone 11d (20 mg, 0.05 mmol, 1.0 equiv) was processed as described in general procedure B and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 1:1) to give 12c as a colorless oil.
Yield: 14 mg (0.04 mmol, 83%; from 11c: 61%); [α]D 20 –4.4 (c 1.00, CHCl3); Rf = 0.46 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 3481 (b), 2947 (w), 2865 (w), 2360 (s), 2341 (m), 1719 (s), 1455 (w), 1978 (w), 1274 (w), 1252 (s), 1160 (m), 1106 (m), 1096 (m), 1051 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.78 (s, 3 H), 3.71 (t, J = 8.5 Hz, 1 H), 2.36 (t, J = 11.5 Hz, 1 H), 2.07 (dtd, J = 13.6, 9.3, 6.0 Hz, 1 H), 1.91–1.85 (m, 1 H), 1.82 (dt, J = 12.6, 3.1 Hz, 1 H), 1.75–1.70 (m, 1 H), 1.70–1.63 (m, 2 H), 1.58–1.35 (m, 7 H), 1.17 (qd, J = 12.2, 6.0 Hz, 1 H), 1.07 (td, J = 12.5, 4.1 Hz, 1 H), 0.98 (ddd, J = 13.8, 10.8, 8.8 Hz, 1 H), 0.94 (s, 3 H), 0.77 (s, 3 H), 0.55 (t, J = 5.5 Hz, 1 H), 0.52–0.49 (m, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 178.4, 81.3, 80.1, 53.1, 51.9, 50.4, 50.3, 50.2, 45.6, 45.1, 36.2, 34.2, 30.8, 25.8, 24.0, 23.1, 21.5, 18.5, 11.7, 11.4.
HRMS (ESI): m/z [M + Na]+ calcd for C20H30NaO4: 357.2036; found: 357.2043.
#
B-nor-α-Hydroxy Methyl Ester 12g
α-Hydroxy ketone 11g (80 mg, 0.26 mmol, 1.0 equiv) was processed as described in general procedure B by using CuCl (20 equiv) and a shorter reaction time of 3 h. The thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 12g as a colorless solid.
Yield: 73 mg (0.22 mmol, 85%); mp 78–80 °C (CHCl3); [α]D 20 +13.8 (c 1.00, CHCl3); Rf = 0.64 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 2929 (m), 2864 (w), 2360 (s), 2341 (s), 1722 (m), 1653 (w), 1455 (w), 1375 (w), 1274 (m), 1260 (m), 1157 (w), 1091 (w), 875 (w), 764 (s), 750 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.64 (ddt, J = 4.2, 2.1, 1.3 Hz, 2 H), 3.78 (s, 3 H), 2.89 (s, 1 H), 2.46 (ddq, J = 17.1, 10.0, 2.2 Hz, 1 H), 2.39–2.32 (m, 1 H), 2.26 (dtt, J = 17.3, 8.8, 2.0 Hz, 1 H), 1.94–1.80 (m, 2 H), 1.79–1.70 (m, 2 H), 1.67–1.58 (m, 2 H), 1.55–1.44 (m, 2 H), 1.42–1.37 (m, 1 H), 1.28–1.13 (m, 2 H), 1.03–0.97 (m, 1 H), 0.95 (s, 3 H), 0.80 (s, 3 H), 0.56 (t, J = 5.5 Hz, 1 H), 0.51 (dd, J = 8.9, 5.6 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 178.4, 160.5, 100.9, 80.2, 53.0, 51.9, 50.5, 50.4, 50.3, 48.6, 46.1, 35.1, 34.2, 29.7, 25.9, 24.0, 23.7, 21.6, 19.1, 18.5, 11.5.
HRMS (ESI): m/z [M + Na]+ calcd for C21H30NaO3: 353.2087; found: 353.2101.
#
B-nor-Acrylic Esters 13 by i-Steroid Opening of B-nor-α-Hydroxy Methyl Esters 12; General Procedure C
The appropriate B-nor-α-hydroxy methyl ester 12 (1.0 equiv) was dissolved in Et2O (0.04 M). Glacial AcOH (200 equiv) and BF3·Et2O (80 equiv) were added and the resulting mixture was stirred for 15 h at 25 °C. The solution was diluted with EtOAc and carefully poured onto sat. aq NaHCO3. The organic phase was separated and the aqueous phase was extracted with EtOAc (2×); the combined organic extracts were washed with sat. brine, dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc) to give the corresponding B-nor-acrylic ester 13 as a colorless oil.
#
B-nor-Acrylic Ester 13a
Ester 12a (94 mg, 0.21 mmol, 1.0 equiv) was processed as described in general procedure C and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 13a as a colorless oil.
Yield: 80 mg (0.17 mmol, 79%); [α]D 23 –68.9 (c 1.00, CHCl3); Rf = 0.32 (n-hexane–EtOAc, 9:1, CAM [blue, UV]).
IR (neat): 2953 (m), 2869 (w), 2360 (m), 1735 (m), 1716 (s), 1456 (m), 1370 (m), 1235 (s), 1035 (m), 971 (w) cm–1.
1H NMR (CDCl3, 700 MHz): δ = 5.23–5.14 (m, 2 H), 4.72 (tt, J = 11.5, 4.6 Hz, 1 H), 3.68 (s, 3 H), 3.26 (ddd, J = 13.9, 4.9, 2.1 Hz, 1 H), 2.63 (td, J = 10.7, 4.4 Hz, 1 H), 2.04 (s, 3 H), 2.02–1.97 (m, 3 H), 1.87–1.80 (m, 2 H), 1.68–1.60 (m, 2 H), 1.50–1.42 (m, 4 H), 1.41–1.31 (m, 2 H), 1.29–1.24 (m, 3 H), 1.16–1.13 (m 3 H), 1.01 (d, J = 6.6 Hz, 3 H), 0.92 (s, 3 H), 0.91 (d, J = 6.9 Hz, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.73 (s, 3 H).
13C NMR (CDCl3, 176 MHz): δ = 170.4, 168.2, 156.4, 135.9, 132.0, 131.4, 72.9, 60.4, 55.3, 54.6, 51.0, 47.7, 45.9, 45.2, 43.0, 40.0, 39.9, 36.3, 33.3, 30.6, 28.9, 27.7, 25.3, 21.5, 21.4, 20.9, 20.1, 19.8, 17.7, 15.4, 12.9.
HRMS (ESI): m/z [M + Na]+ calcd for C31H48NaO4: 507.3445; found: 507.3451.
#
B-nor-Acrylic Ester 13b
Ester 12b (78 mg, 0.17 mmol, 1.0 equiv) was processed as described in general procedure C and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 13b as a colorless oil.
Yield: 58 mg (0.12 mmol, 70%); [α]D 20 –40.0 (c 1.00, CH2Cl2); Rf = 0.40 (n-hexane–EtOAc, 9:1, CAM [blue, UV]).
IR (neat): 2955 (m), 2870 (w), 2360 (w), 2341 (w), 1730 (m), 1717 (s), 1456 (w), 1434 (w), 1376 (w), 1362 (w), 1238 (s), 1139 (w), 1078 (w), 1035 (m), 754 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.71 (tt, J = 11.5, 4.5 Hz, 1 H), 3.68 (s, 3 H), 3.25 (ddd, J = 13.9, 4.9, 2.0 Hz, 1 H), 2.63 (td, J = 10.7, 4.3 Hz, 1 H), 2.03 (s, 3 H), 1.97 (dd, J = 32.6, 12.2 Hz, 1 H), 1.81 (d, J = 13.4 Hz, 2 H), 1.70–1.58 (m, 1 H), 1.56–1.05 (m, 20 H), 0.92 (d, J = 6.6 Hz, 3 H), 0.91 (s, 3 H), 0.85 (s, 1 H), 0.82 (d, J = 7.5 Hz, 3 H), 0.81 (s, 3 H), 0.80 (d, J = 6.8 Hz, 3 H), 0.72 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 170.4, 168.2, 156.3, 131.4, 72.9, 60.3, 55.3, 54.5, 51.0, 47.7, 46.0, 45.9, 45.3, 40.0, 36.3, 36.1, 34.1, 30.6, 29.3, 28.8, 27.7, 26.3, 25.3, 23.2, 21.5, 20.9, 20.0, 19.2, 19.1, 15.3, 12.6, 12.1.
HRMS (ESI): m/z [M + Na]+ calcd for C32H52NaO4: 523.3758; found: 523.3764.
#
B-nor-Acrylic Ester 13c
Ester 12c (19 mg, 0. 06 mmol, 1.0 equiv) was processed as described in general procedure C and the thus-obtained crude product was purified by column chromatography (silica gel, n-hexane–EtOAc, 4:1) to give 13c as a colorless oil.
Yield: 9 mg (0.02 mmol, 42%); [α]D 24 –18.9 (c 0.48, CHCl3); Rf = 0.81 (n-hexane–EtOAc, 1:1, CAM [blue, UV]).
IR (neat): 3734 (b), 2952 (m), 2860 (w), 2360 (s), 2341 (s), 1733 (m), 1716 (w), 1540 (m), 1507 (w), 1260 (m), 750 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.72 (tt, J = 11.5, 4.6 Hz, 1 H), 4.62 (dd, J = 9.3, 7.8 Hz, 1 H), 3.70 (s, 3 H), 3.35 (ddd, J = 13.9, 4.8, 2.1 Hz, 1 H), 2.70 (td, J = 10.9, 4.3 Hz, 1 H), 2.18–2.09 (m, 1 H), 2.04 (s, 3 H), 2.02–1.92 (m, 1 H), 1.83 (dt, J = 13.4, 3.5 Hz, 1 H), 1.80–1.76 (m, 1 H), 1.74–1.68 (m, 1 H), 1.68–1.54 (m, 1 H), 1.52–1.36 (m, 2 H), 1.31–1.23 (m, 1 H), 1.22–1.10 (m, 2 H), 0.93 (s, 3 H), 0.87 (d, J = 0.7 Hz, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 171.3, 170.4, 167.7, 157.9, 82.3, 72.8, 60.3, 51.0, 49.2, 47.3, 45.9, 45.2, 37.1, 36.2, 30.7, 27.9, 27.6, 25.2, 21.3, 20.3, 15.5, 12.6.
HRMS (ESI): m/z [M + Na]+ calcd for C22H32NaO5: 399.2141; found: 399.2137.
#
B-nor-Aldehyde 14
Step 1 giving the corresponding B-nor-allylic alcohol: A solution of B-nor-acrylic ester 13a (58 mg, 0.12 mmol, 1.0 equiv) in THF (0.6 mL) was added dropwise to a suspension of LiAlH4 (22 mg, 0.59 mmol, 4.0 equiv) in THF (0.6 mL) at 25 °C. The resulting mixture was stirred at the same temperature for 3 h. A sat. aq potassium/sodium tartrate solution (2 mL) was added and the mixture was stirred for 15 min. The phases were separated and the aqueous phase was extracted with EtOAc (2 × 3 mL). The combined organic extracts were washed with sat. brine, dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 1:1→1:3) to give the corresponding B-nor-allylic alcohol as a colorless solid.
Yield: 25 mg (0.06 mmol, 50%); mp 183.5–184.5 °C (CHCl3); [α]D 20 –102.7 (c 1.00, CHCl3); Rf = 0.26 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 3275 (b), 2954 (m), 2926 (w), 2866 (w), 2360 (s), 2338 (s), 1457 (w), 1368 (m), 1273 (w), 1016 (w), 975 (m), 751 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 5.24–5.14 (m, 2 H), 4.14 (d, J = 11.6 Hz, 1 H), 4.06 (d, J = 11.6 Hz, 1 H), 3.53 (tt, J = 11.2, 4.4 Hz, 1 H), 2.80 (ddd, J = 13.7, 4.6, 2.0 Hz, 1 H), 2.37 (td, J = 10.8, 4.0 Hz, 1 H), 2.08–1.98 (m, 2 H), 1.93–1.82 (m, 4 H), 1.78 (dt, J = 13.2, 3.4 Hz, 2 H), 1.75–1.04 (m, 13 H), 1.02 (d, J = 6.6 Hz, 3 H), 0.91 (d, J = 6.8 Hz, 3 H), 0.87 (s, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.82 (d, J = 6.8 Hz, 3 H), 0.71 (s, 3 H).
13C NMR (126 MHz, CDCl3) δ = 145.9, 136.9, 136.0, 132.0, 71.7, 61.3, 57.5, 55.2, 54.1, 47.5, 45.3, 44.8, 43.0, 40.0, 39.9, 37.2, 33.5, 33.3, 32.0, 29.1, 24.9, 21.4, 21.0, 20.1, 19.8, 17.7, 15.3, 12.9.
HRMS (ESI): m/z [M + Na]+ calcd for C28H44NaO2: 437.3390; found: 437.3398.
Step 2 giving B-nor-aldehyde 14 : The B-nor-allylic alcohol thus-obtained (25 mg, 0.06 mmol, 1.0 equiv) was dissolved in CH2Cl2 (1 mL) and MnO2 (50 mg, 0.6 mmol, 10.0 equiv) was added. The resulting dark suspension was allowed to stir for 48 h at 25 °C. The suspension was diluted with CH2Cl2 (2 mL) and filtered through a plug of Celite. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 1:1) to give 14 as a colorless solid.
Yield: 20 mg (0.05 mmol, 80%; 40% over 2 steps); mp 124–124.5 °C (CHCl3); [α]D 20 –58.4 (c 0.47, CHCl3); Rf = 0.51 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 3321 (b), 2955 (s), 2928 (s), 2867 (s), 2359 (w), 1675 (s), 1596 (m), 1370 (w), 1239 (w), 1071 (m), 970 (m), 817 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 9.96 (s, 1 H), 5.26–5.12 (m, 2 H), 3.70 (tt, J = 11.2, 4.5 Hz, 1 H), 3.47 (ddd, J = 14.3, 4.6, 2.0 Hz, 1 H), 2.56 (td, J = 10.8, 4.0 Hz, 1 H), 2.14–1.99 (m, 3 H), 1.97–1.10 (m, 17 H), 1.02 (d, J = 6.7 Hz, 3 H), 0.94 (s, 3 H), 0.91 (d, J = 6.8 Hz, 3 H), 0.82 (t, J = 6.6 Hz, 6 H), 0.74 (s, 3 H).
13C NMR (126 MHz, CDCl3) δ = 189.8, 169.0, 139.4, 135.8, 132.0, 71.0, 60.3, 55.4, 54.7, 46.4, 45.3, 43.0, 40.0, 36.3, 34.0, 33.3, 33.2, 31.4, 28.8, 26.7, 26.7, 21.4, 20.8, 20.1, 19.8, 17.7, 15.8, 12.9.
HRMS (ESI): m/z [M + Na]+ calcd for C28H44NaO2: 435.3234; found: 435.3240.
#
Substrate 10g
#
Tosylate 20
17-Methylenedehydroepiandrosterone[18] (19; 580 mg, 2.02 mmol, 1.0 equiv) was dissolved in pyridine (20 mL) and DMAP (24 mg, 0.2 mmol, 0.1 equiv) was added. Then TsCl (1.93 g, 10.1 mmol, 5.0 equiv) was added and the resulting mixture was stirred for 16 h at 25 °C. The solution was poured onto ice water (70 mL) and extracted with Et2O (3 × 25 mL). The organic phase was separated and washed sequentially with H2O (2 × 50 mL) and sat. brine (100 mL). The organic phase was then dried over MgSO4 and filtered, and all volatiles were removed under reduced pressure. The thus-obtained residue was dissolved in toluene (2 × 15 mL) and concentrated under reduced pressure to give tosylate 20 as a colorless solid which was used in the next step without further purification.
Yield: 781 mg (1.77 mmol, 88%); mp 127–128.5 °C (CHCl3); [α]D 20 –59.3 (c 1.00, CH2Cl2); Rf = 0.47 (n-hexane–EtOAc, 9:1, CAM [orange, UV]).
IR (neat): 2944 (m), 2907 (w), 2360 (s), 2341 (m), 1716 (w), 1652 (w), 1455 (w), 1362 (s; 1187 (s), 1175 (s), 1098 (w), 939 (s), 888 (m), 864 (s), 813 (m), 667 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 7.80 (d, J = 8.3 Hz, 2 H), 7.33 (d, J = 7.7 Hz, 2 H), 5.34–5.30 (m, 1 H), 4.70–4.60 (m, 2 H), 4.33 (tt, J = 11.5, 4.8 Hz, 1 H), 2.57–2.45 (m, 1 H), 2.45 (s, 3 H), 2.34–2.17 (m, 3 H), 2.06–1.99 (m, 1 H), 1.86–1.79 (m, 3 H), 1.76–1.65 (m, 2 H), 1.62–1.42 (m, 4 H), 1.34–1.17 (m, 2 H), 1.07–1.00 (m, 1 H), 0.99 (s, 3 H), 0.98–0.87 (m, 2 H), 0.78 (s, 3 H).
13C NMR (126 MHz, CDCl3) δ = 161.7, 144.5, 139.1, 134.9, 129.9, 127.8, 123.5, 101.1, 82.4, 54.8, 50.3, 44.0, 39.0, 37.1, 36.6, 35.6, 31.8, 31.8, 29.5, 28.8, 24.4, 21.8, 21.1, 19.4, 18.4.
HRMS (ESI): m/z [M + Na]+ calcd for C27H36NaO3S: 463.2277; found: 463.2280.
#
6-Hydroxy-i-steroid 21
Tosylate 20 (780 mg, 1.77 mmol, 1.0 equiv) was suspended in a mixture of acetone and H2O (4:1, 22.5 mL) in a pressure vessel and KOAc (694 mg, 7.08 mmol, 4.0 equiv) was added. The resulting mixture was stirred for 16 h at 85 °C. After cooling of the mixture to ambient temperature, H2O (15 mL) was added and the mixture was extracted with Et2O (3 × 10 mL). The combined organic phases were washed with sat. brine, dried over MgSO4, and filtered, and all volatiles were removed under reduced pressure to give 21 (500 mg, 1.77 mmol, quant.) as a pale yellow oil which was used in the next step without further purification. A small sample of this material was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield pure 21 as a colorless oil.
[α]D 20 +40.7 (c 1.00, CHCl3); Rf = 0.35 (n-hexane–EtOAc, 9:1, CAM [green]).
IR (neat): 2927 (s), 2865 (m), 2360 (s), 2341 (m), 1737 (s), 1653 (w), 1455 (m), 1373 (s), 1228 (m), 1216 (s), 1025 (m), 875 (m), 668 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.66–4.59 (m, 2 H), 3.27 (t, J = 2.9 Hz, 1 H), 2.51 (ddq, J = 17.1, 10.1, 2.3 Hz, 1 H), 2.24 (dtt, J = 17.4, 8.7, 2.0 Hz, 1 H), 1.95–1.86 (m, 2 H), 1.83 (ddd, J = 12.4, 3.9, 2.9 Hz, 1 H), 1.80–1.69 (m, 2 H), 1.61–1.52 (m, 4 H), 1.52–1.31 (m, 3 H), 1.22 (dtd, J = 14.1, 12.6, 3.5 Hz, 2 H), 1.08 (s, 3 H), 1.08–1.01 (m, 1 H), 0.92–0.85 (m, 2 H), 0.84 (s, 3 H), 0.53 (dd, J = 4.8, 3.7 Hz, 1 H), 0.32–0.28 (m, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 162.1, 100.8, 73.9, 54.7, 48.1, 44.4, 43.2, 39.1, 37.1, 36.1, 33.4, 30.0, 29.6, 25.2, 24.4, 24.3, 22.7, 20.4, 18.8, 11.8.
HRMS (ESI): m/z [M + Na]+ calcd for C20H30NaO: 309.2189; found: 309.2201.
#
i-Steroid Ketone 10g
CrO3 (1.42 g, 14.4 mmol, 4.0 equiv) was added portionwise to pyridine (15 mL) under stirring at 0 °C. Then, 6-hydroxy-i-steroid 21 (1.02 g, 3.56 mmol, 1.0 equiv), dissolved in pyridine (15 mL), was added via cannula to the brown suspension. The resulting, dark solution was stirred for 15 h at 25 °C. Et2O (60 mL) was added and the solution was filtered over Celite and rinsed with Et2O (2 × 30 mL). The filtrate was washed sequentially with H2O (2 × 50 mL) and sat. brine (50 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield i-steroid ketone 10g as a colorless solid.
Yield: 555 mg (1.95 mmol, 55% over 2 steps); mp 176–177 °C (CHCl3); [α]D 20 +41.0 (c 1.00, CHCl3); Rf = 0.45 (n-hexane–EtOAc, 9:1, CAM [green]).
IR (neat): 2946 (m), 2906 (m), 1680 (s), 1454 (w), 1372 (w), 1295 (w), 1161 (w), 875 (m), 809 (w), 737 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.69–4.65 (m, 2 H), 2.58–2.46 (m, 2 H), 2.32–2.23 (m, 1 H), 2.06–1.92 (m, 2 H), 1.89 (ddd, J = 12.6, 4.2, 3.1 Hz, 2 H), 1.83 (dd, J = 13.7, 8.1 Hz, 1 H), 1.74–1.68 (m, 4 H), 1.59–1.49 (m, 2 H), 1.37–1.27 (m, 3 H), 1.19 (ddd, J = 12.8, 10.2, 6.4 Hz, 1 H), 1.03 (s, 3 H), 1.02–0.98 (m, 1 H), 0.84 (s, 3 H), 0.73 (t, J = 4.9 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 209.5, 161.1, 101.4, 55.1, 47.0, 46.5, 46.5, 44.8, 44.4, 35.6, 35.5, 34.9, 33.6, 29.5, 26.0, 24.2, 22.9, 19.9, 18.6, 11.9.
HRMS (ESI): m/z [M + Na]+ calcd for C20H28NaO: 307.2032; found: 307.2047.
#
α-Methoxy Methyl Ester 15
Ester 12a (16 mg, 0.036 mmol, 1.0 equiv) was dissolved in THF (0.36 mL), NaH (6 mg, 0.144 mmol, 4.0 equiv) was added, and the resulting mixture was stirred for 5 min at 25 °C. MeI (16 μL, 0.25 mmol, 7.0 equiv) was added and the mixture was stirred for 1 h at 25 °C. The mixture was cooled to 0 °C and quenched with sat. aq NH4Cl (2 mL) and warmed to ambient temperature. The mixture was then extracted with EtOAc (3 × 2 mL), and the combined organic phases were washed sequentially with H2O (3 mL) and sat. brine (3 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield 15 as a colorless oil.
Yield: 13 mg (0.03 mmol, 81%); [α]D 20 –18.9 (c 1.00, CHCl3); Rf = 0.76 (n-hexane–EtOAc, 9:1, CAM [orange]).
IR (neat): 2951 (s), 2924 (s), 2866 (s), 2359 (w), 1740 (s), 1456 (m), 1379 (m), 1246 (m), 1215 (w), 1199 (w), 1152 (w), 1104 (m), 1053 (w), 970 (w), 793 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 5.21–5.16 (m, 2 H), 3.72 (s, 3 H), 3.20 (s, 3 H), 2.11 (t, J = 11.6 Hz, 1 H), 1.95 (dt, J = 12.9, 3.3 Hz, 1 H), 1.92–1.82 (m, 2 H), 1.75–1.63 (m, 4 H), 1.57–1.37 (m, 7 H), 1.19–1.03 (m, 3 H), 1.01 (d, J = 6.6 Hz, 3 H), 0.98–0.92 (m, 2 H), 0.91 (d, J = 6.9 Hz, 3 H), 0.89 (s, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.74 (dd, J = 8.6, 5.9 Hz, 1 H), 0.67 (d, J = 5.4 Hz, 1 H), 0.65 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 175.1, 135.9, 131.7, 87.8, 55.2, 55.1, 52.7, 51.8, 51.6, 51.4, 50.1, 49.6, 45.0, 42.8, 39.9, 39.0, 33.2, 33.1, 28.7, 25.7, 23.9, 23.8, 21.9, 21.1, 20.0, 19.6, 18.2, 17.6, 13.3, 12.6.
HRMS (ESI): m/z [M + Na]+ calcd for C30H48NaO3: 479.3496; found: 479.3497.
#
B-nor-i-Steroid Ketone 16a
Step 1 giving the corresponding diol: To ester 12a (50 mg, 0.11 mmol, 1.0 equiv) in THF (4 mL) at 0 °C was added LiAlH4 (17 mg, 0.45 mmol, 4.0 equiv). The resulting suspension was heated to 66 °C for 16 h. After cooling to ambient temperature, the reaction was quenched by addition of sat. aq potassium/sodium tartrate solution (2.5 mL) and stirred vigorously for 15 min. The phases were separated and the aqueous phase was extracted with EtOAc (2 × 5 mL). The combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure to yield the corresponding diol as a colorless solid that was used immediately in the next step.
Yield: 42 mg (0.10 mmol, 92%); mp 88–90 °C (CHCl3); [α]D 20 –5.7 (c 1.00, CHCl3); Rf = 0.15 (n-hexane–EtOAc, 9:1, CAM [red]).
IR (neat): 3394 (b), 2954 (s), 2866 (s), 2360 (s), 2342 (m), 1456 (m), 1371 (m), 1275 (m), 1262 (m), 1159 (w), 970 (m), 749 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 5.24–5.15 (m, 2 H), 3.41 (s, 2 H), 2.09–2.03 (m, 1 H), 2.00 (dt, J = 12.8, 3.1 Hz, 1 H), 1.88–1.80 (m, 2 H), 1.77–1.63 (m, 6 H), 1.51–1.37 (m, 4 H), 1.34–1.08 (m, 7 H), 1.03 (d, J = 6.7 Hz, 3 H), 0.91 (d, J = 6.8 Hz, 3 H), 0.85–0.81 (m, 9 H), 0.72–0.71 (m, 3 H), 0.47 (t, J = 5.0 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 136.0, 132.0, 78.4, 69.3, 55.4, 51.8, 51.3, 50.1, 49.1, 47.4, 44.9, 43.0, 40.1, 39.5, 33.5, 33.3, 29.0, 25.8, 24.9, 21.8 (2C), 21.3, 20.1, 19.8, 18.5, 17.8, 13.1, 9.4.
HRMS (ESI): m/z [M + Na]+ calcd for C28H46NaO2: 437.3390; found: 437.3398.
Step 2 giving ketone 16a : To a solution of the diol (40 mg, 0.1 mmol, 1.0 equiv) in a mixture of THF (750 μL) and H2O (250 μL) was added NaIO4 (248 mg, 1.16 mmol, 5.0 equiv). The resulting suspension was stirred at 25 °C for 1.5 h. H2O (4 mL) was added and the resulting mixture was extracted with EtOAc (3 × 3 mL). The combined organic phases were washed with sat. brine and dried over MgSO4. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield 16a as a colorless solid.
Yield: 83 mg (0.21 mmol, 90%; 82% over 2 steps); mp 133–134.5 °C (EtOAc); [α]D 20 –28.9 (c 1.00, CHCl3); Rf = 0.65 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 2961 (s), 2940 (s), 2361 (s), 2338 (s), 1780 (s), 1463 (m), 1366 (m), 988 (w), 755 (w) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 5.24–5.14 (m, 2 H), 2.18 (dd, J = 12.6, 10.3 Hz, 1 H), 2.09–2.00 (m, 3 H), 1.96–1.81 (m, 3 H), 1.78–1.69 (m, 2 H), 1.65–1.53 (m, 3 H), 1.51–1.41 (m, 2 H), 1.40–1.24 (m, 4 H), 1.23–1.11 (m, 3 H), 1.03 (d, J = 6.6 Hz, 3 H), 1.00 (s, 3 H), 0.91 (d, J = 6.8 Hz, 3 H), 0.89 (d, J = 5.4 Hz, 1 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.82 (d, J = 6.8 Hz, 3 H), 0.69 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 217.0, 135.8, 132.1, 55.0, 51.8, 51.8, 50.7, 50.2, 48.1, 44.9, 43.0, 40.1, 39.4, 36.5, 35.0, 33.3, 29.2, 25.9, 23.9, 21.7, 21.4, 20.1, 19.8, 17.8, 17.7, 15.2, 12.6.
HRMS (ESI): m/z [M + Na]+ calcd for C27H42NaO: 405.3128; found: 405.3148.
#
B-nor-i-Steroid Ketone 16b
Step 1 giving the corresponding diol: To ester 12b (190 mg, 0.41 mmol, 1.0 equiv) in THF (4 mL) at 0 °C was added LiAlH4 (63 mg, 1.65 mmol, 4.0 equiv). The resulting suspension was heated to 66 °C for 16 h. After cooling to ambient temperature, the reaction was quenched by addition of sat. aq potassium/sodium tartrate solution (6 mL) and the mixture was stirred vigorously for 15 min. The phases were separated and the aqueous phase was extracted with EtOAc (2 × 5 mL). The combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure to yield the corresponding diol as a colorless solid that was used immediately in the next step.
Yield: 160 mg (0.37 mmol, 91%); mp 114–116 °C (CHCl3); [α]D 20 +28.9 (c 1.00, CHCl3); Rf = 0.24 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 3379 (b), 2965 (s), 2958 (s), 2864 (s), 2360 (m), 2341 (m), 1463 (m), 1376 (m), 1309 (w), 1266 (w), 1047 (w), 1020 (m), 747 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 3.42 (d, J = 5.0 Hz, 2 H), 2.03 (dt, J = 12.8, 3.0 Hz, 1 H), 1.93–1.62 (m, 6 H), 1.50–0.96 (m, 19 H), 0.94 (d, J = 6.6 Hz, 3 H), 0.86 (s, 1 H), 0.84 (d, J = 1.6 Hz, 3 H), 0.83–0.82 (m, 6 H), 0.81 (d, J = 6.8 Hz, 3 H), 0.70 (s, 3 H), 0.47 (t, J = 5.0 Hz, 1 H).
13C NMR (CDCl3, 126 MHz): δ = 78.3, 69.3, 55.3, 51.7, 51.2, 50.0, 49.1, 47.4, 45.9, 45.0, 39.6, 36.1, 34.1, 33.5, 29.2, 28.8, 26.1, 25.7, 24.8, 23.1, 21.8, 21.7, 19.9, 19.1, 19.0, 18.4, 12.7, 12.1, 9.3.
HRMS (ESI): m/z [M + Na]+ calcd for C29H50NaO2: 453.3703; found: 453.3717.
Step 2 giving ketone 16b : To a solution of the diol (100 mg, 0.23 mmol, 1.0 equiv) in a mixture of THF (2 mL) and H2O (500 μL) was added NaIO4 (248 mg, 1.16 mmol, 5.0 equiv). The resulting suspension was stirred at 25 °C for 30 min. H2O (4 mL) was added and the resulting mixture was extracted with EtOAc (3 × 3 mL). The combined organic phases were washed with sat. brine and dried over MgSO4. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield 16b as a colorless solid.
Yield: 83 mg (0.21 mmol, 90%; 82% over 2 steps); mp 75–76 °C (CHCl3); [α]D 20 +8.8 (c 1.00, CHCl3); Rf = 0.59 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 2953 (s), 2934 (s), 2867 (s), 2360 (s), 2341 (s), 1721 (s), 1540 (w), 1456 (m), 1383 (m), 1366 (m), 1290 (m), 1260 (m), 749 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 2.17 (dd, J = 12.4, 10.4 Hz, 1 H), 2.11–2.03 (m, 2 H), 1.96–1.79 (m, 2 H), 1.74 (dd, J = 12.9, 8.8 Hz, 2 H), 1.69–1.51 (m, 4 H), 1.47 (dd, J = 12.7, 3.6 Hz, 1 H), 1.43–1.08 (m, 15 H), 0.99 (s, 3 H), 0.93 (d, J = 6.5 Hz, 3 H), 0.89 (t, J = 5.3 Hz, 1 H), 0.84 (d, J = 7.6 Hz, 3 H), 0.83 (d, J = 6.8 Hz, 3 H), 0.80 (d, J = 6.8 Hz, 3 H), 0.68 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 217.1, 55.1, 51.8, 51.7, 50.6, 50.2, 48.1, 46.0, 44.9, 39.6, 36.5, 36.3, 35.0, 34.2, 29.3, 29.0, 26.3, 25.9, 23.9, 23.2, 21.7, 19.9, 19.2, 19.1, 17.7, 15.1, 12.3, 12.1.
HRMS (ESI): m/z [M + Na]+ calcd for C28H46NaO: 421.3441; found: 421.3454.
#
B-nor-3-Acetyl Ketone 17a
Ketone 16a (24 mg, 0.06 mmol, 1.0 equiv) was dissolved in glacial AcOH (4.2 mL) and 2.5 M aq H2SO4 (1.1 mL) was added. The resulting solution was stirred at 95 °C for 48 h. After cooling to ambient temperature, the solution was neutralized with 25% aq NaOH and extracted with Et2O (3 × 5 mL). The combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was re-dissolved in pyridine (0.5 mL). To this solution were added sequentially DMAP (0.7 mg, 0.006 mmol, 0.1 equiv) and acetic anhydride (28 μL, 0.30 mmol, 5.0 equiv) and the mixture was stirred for 24 h at 25 °C. Afterwards, the reaction mixture was quenched with sat. aq NH4Cl (1 mL) and extracted with Et2O (3 × 3 mL). The combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield 17a as a colorless solid.
Yield: 22 mg (0.048 mmol, 80%, mixture of C5-epimers); mp 110.5–112 °C (CHCl3); Rf = 0.44 (n-hexane–EtOAc, 9:1, CAM [blue]).
IR (neat): 2943 (s), 2939 (m), 2830 (s), 2359 (s), 2341 (s), 1450 (m), 1417 (m), 1115 (w), 1022 (s), 839 (m) cm–1.
1H NMR (CDCl3, 400 MHz): δ = 5.23–5.08 (m), 5.01 (t, J = 3.9 Hz), 4.35 (tq, J = 11.8, 4.4 Hz), 2.65–2.58 (m), 2.40–2.34 (m), 2.29 (ddt, J = 13.3, 4.3, 2.2 Hz), 2.23–2.16 (m), 2.16–2.04 (m), 2.02 (s), 1.99 (s), 1.98–1.20 (m), 1.17 (s), 1.04–1.02 (m), 1.03 (s), 1.01 (d, J = 6.6 Hz), 0.97 (d, J = 6.6 Hz), 0.90 (d, J = 6.8 Hz), 0.89 (d, J = 6.8 Hz), 0.82 (d, J = 6.9 Hz), 0.81 (d, J = 6.9 Hz), 0.80 (d, J = 6.8 Hz), 0.79 (d, J = 6.8 Hz), 0.65 (s), 0.51 (s).
13C NMR (CDCl3, 101 MHz): δ = 207.6, 206.8, 170.2, 135.4, 132.0, 70.7, 68.4, 55.4, 54.8, 53.4, 52.2, 51.2, 50.4, 49.8, 47.6, 44.8, 44.1, 42.8, 42.8, 42.0, 40.2, 40.0, 39.2, 38.6, 38.0, 37.2, 33.1, 33.0, 32.8, 29.0, 27.9, 27.8, 27.1, 26.6, 25.0, 23.6, 23.6, 23.0, 21.8, 21.3, 21.3, 21.2, 21.1, 21.0, 20.7, 20.0, 19.9, 19.6, 17.6, 17.6, 17.6, 12.7, 12.4.
HRMS (ESI): m/z [M + Na]+ calcd for C29H46NaO3: 465.3339; found: 465.3359.
#
B-nor-3-Acetyl Ketone 17b
Ketone 16b (82 mg, 0.2 mmol, 1.0 equiv) was dissolved in glacial AcOH (16.7 mL) and 2.5 M aq H2SO4 (4.2 mL) was added. The resulting solution was stirred at 95 °C for 48 h. After cooling to ambient temperature, the solution was neutralized with 25% aq NaOH and extracted with Et2O (3 × 15 mL). The combined organic phases were washed with sat. brine (15 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was re-dissolved in pyridine (4 mL). To this solution were added sequentially DMAP (2.5 mg, 0.02 mmol, 0.1 equiv) and acetic anhydride (95 μL, 1.0 mmol, 5.0 equiv) and the mixture was stirred for 24 h at 25 °C. Afterwards, the reaction mixture was quenched with sat. aq NH4Cl (10 mL) and extracted with Et2O (3 × 10 mL). The combined organic phases were washed with sat. brine (10 mL), dried over MgSO4, and filtered. All volatiles were removed under reduced pressure and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to yield 17b as a colorless solid (81 mg, 88%, mixture of C5-epimers). The mixture of epimers was re-subjected to column chromatography (silica gel, CH2Cl2–EtOAc–acetone 300:2:1) to yield an analytically pure sample of the less polar epimer.
#
Mixture of Epimers 17b
Yield: 81 mg (0.176 mmol, 88%, mixture of epimers); mp 115.5–116 °C (CHCl3); Rf = 0.40 (n-hexane–EtOAc, 9:1, CAM [blue]).
1H NMR (CDCl3, 500 MHz): δ = 5.04–5.00 (m), 4.37 (tt, J = 11.5, 4.4 Hz), 2.63 (t, J = 6.7 Hz), 2.38 (dt, J = 6.5, 2.1 Hz), 2.34–2.19 (m), 2.04 (s), 2.01 (s), 1.96–1.79 (m), 1.83 (s), 1.78–1.68 (m), 1.71–1.31 (m), 1.33 (s), 1.34–1.18 (m), 1.18 (s), 1.17–1.05 (m), 1.04 (s), 0.93 (d, J = 6.5 Hz), 0.89 (d, J = 6.5 Hz), 0.87–0.82 (m), 0.81 (d, J = 6.8 Hz), 0.65 (s), 0.52 (s).
13C NMR (CDCl3, 126 MHz): δ = 219.9, 170.6, 170.3, 70.9, 68.5, 55.6, 55.0, 53.5, 52.3, 51.4, 50.5, 50.0, 47.8, 47.6, 46.0, 45.9, 45.1, 44.2, 42.2, 39.5, 38.8, 38.2, 37.4, 36.4, 36.2, 34.1, 33.9, 33.0, 29.3, 29.2, 29.0, 28.1, 28.0, 27.7, 27.3, 26.7, 26.3, 26.2, 25.2, 23.8, 23.2, 23.2, 23.1, 22.0, 21.5, 21.4, 21.3, 20.9, 20.0, 19.9, 19.2, 19.2, 19.0, 19.0, 12.6, 12.3, 12.1.
#
Major, Less Polar Epimer 17b
Mp 122.5–123 °C (CHCl3); [α]D 20 –24.9 (c 1.00, CHCl3); Rf = 0.51 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 2954 (s), 2931 (s), 2869 (m), 2360 (w), 1733 (s), 1462 (m), 1375 (m), 1240 (s), 1140 (w), 1030 (m), 750 (s) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.37 (tt, J = 11.4, 4.4 Hz, 1 H), 2.62 (t, J = 6.7 Hz, 1 H), 2.37 (dt, J = 6.3, 2.1 Hz, 1 H), 2.30 (ddt, J = 12.9, 4.6, 2.3 Hz, 1 H), 2.25–2.17 (m, 1 H), 2.03 (t, J = 3.6 Hz, 1 H), 2.00 (s, 3 H), 1.89–1.79 (m, 2 H), 1.73 (dt, J = 13.2, 6.9 Hz, 1 H), 1.70–1.53 (m, 6 H), 1.54–1.21 (m, 9 H), 1.18 (s, 3 H), 1.16–0.98 (m, 6 H), 0.89 (d, J = 6.5 Hz, 3 H), 0.85–0.82 (m, 6 H), 0.80 (d, J = 6.8 Hz, 2 H), 0.51 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 219.9, 170.3, 70.9, 55.6, 53.5, 50.5, 47.8, 45.9, 44.2, 42.2, 38.9, 38.2, 36.4, 33.9, 33.0, 29.3, 27.7, 27.3, 26.7, 26.2, 23.2, 23.2, 22.0, 21.5, 20.9, 19.9, 19.2, 19.0, 12.6, 12.1.
HRMS (ESI): m/z [M + Na]+ calcd for C30H50NaO3: 481.3652; found: 481.3675.
#
B-nor-3-Hydroxy Ketone 18a
To a solution of 17a (20 mg, 0.044 mmol, 1.0 equiv) in MeOH–CH2Cl2 (10:1, 1.1 mL) was added KOH (12 mg, 0.22 mmol, 5.0 equiv). After stirring at 25 °C for 15 min, the reaction mixture was diluted with H2O (5 mL) and neutralized with aq HCl (1.0 M). The aqueous layer was extracted with EtOAc (3 × 5 mL), and the combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. Column chromatography (silica gel, n-hexane–EtOAc, 3:1→1:1) gave 18a as a colorless oil.
Yield: 15 mg (0.037 mmol, 83%); Rf = 0.59 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 3313 (b), 2947 (s), 2918 (m), 2359 (s), 2341 (s), 1711 (w), 1540 (m), 1507 (w), 1264 (m), 763 (m) cm–1.
1H NMR (CDCl3, 401 MHz): δ = 5.26–5.08 (m), 4.10–4.05 (m), 3.39–3.28 (m), 2.64–2.57 (m), 2.38–1.22 (m), 1.17 (s), 1.03 (s), 1.02 (d, J = 6.6 Hz), 0.98 (d, J = 6.6 Hz), 0.91 (d, J = 6.8 Hz), 0.90 (d, J = 6.8 Hz), 0.84 (d, J = 1.6 Hz), 0.83 (d, J = 1.6 Hz), 0.82 (d, J = 1.6 Hz), 0.81 (d, J = 1.6 Hz), 0.66 (s), 0.53 (s).
13C NMR (CDCl3, 101 MHz): δ = 197.2, 195.2, 135.6, 132.2, 76.8, 68.3, 65.4, 55.6, 53.9, 52.5, 50.6, 47.8, 44.2, 43.0, 42.1, 40.3, 40.1, 38.8, 38.2, 33.4, 33.2, 30.8, 30.7, 28.0, 23.2, 22.0, 21.2, 20.9, 20.1, 19.8, 17.7, 17.7, 12.9.
HRMS (ESI): m/z [M + Na]+ calcd for C28H46NaO: 423.6362 found: 423.6354.
#
B-nor-3-Hydroxy Ketone 18b
To a solution of 17b (14 mg, 0.031 mmol, 1.0 equiv) in MeOH–CH2Cl2 (10:1, 0.7 mL) was added KOH (9 mg, 0.155 mmol, 5.0 equiv). After stirring at 25 °C for 15 min, the reaction mixture was diluted with H2O (3 mL) and neutralized with aq HCl (1.0 M). The aqueous layer was extracted with EtOAc (3 × 3 mL), and the combined organic phases were washed with sat. brine (5 mL), dried over MgSO4, filtered, and concentrated under reduced pressure. Column chromatography (silica gel, n-hexane–EtOAc, 3:1→1:1) gave 18b as a colorless solid.
Yield: 10 mg (0.024 mmol, 79%, mixture of C5-epimers); mp 115.5–116 °C (CHCl3); Rf = 0.48 (n-hexane–EtOAc, 1:1, CAM [blue]).
IR (neat): 3389 (b), 2955 (s), 2932 (s), 2867 (s), 2360 (m), 2342 (m), 1729 (s), 1461 (m), 1379 (m), 1259 (m), 1204 (w), 1059 (m), 909 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 5.04–5.00 (m), 4.37 (tt, J = 11.5, 4.4 Hz), 2.63 (t, J = 6.7 Hz), 2.38 (dt, J = 6.5, 2.1 Hz), 2.34–2.19 (m), 2.04 (s), 2.01 (s), 1.96–1.79 (m), 1.83 (s), 1.78–1.68 (m), 1.71–1.31 (m), 1.33 (s), 1.34–1.18 (m), 1.18 (s), 1.17–1.05 (m), 1.04 (s), 0.93 (d, J = 6.5 Hz), 0.89 (d, J = 6.5 Hz), 0.87–0.82 (m), 0.81 (d, J = 6.8 Hz), 0.65 (s), 0.52 (s).
13C NMR (CDCl3, 126 MHz): δ = 221.1, 68.3, 65.3, 55.6, 55.0, 53.9, 52.4, 51.2, 50.5, 50.0, 47.9, 45.9, 45.1, 44.1, 42.2, 38.9, 38.2, 37.4, 36.4, 36.2, 33.9, 33.4, 30.7, 30.7, 29.3, 27.7, 26.1, 23.9, 23.2, 22.0, 21.2, 20.9, 20.0, 19.2, 19.0, 12.6, 12.3, 12.1.
HRMS (ESI): m/z [M + Na]+ calcd for C28H48NaO2: 439.3547; found: 439.3550.
#
i-Steroid Dione 22
α-Hydroxy ketone 11g (45 mg, 0.15 mmol, 1.0 equiv) was suspended in MeOH (3.8 mL) and CuCl (150 mg, 1.5 mmol, 10.0 equiv) was added. The resulting suspension was stirred at 50 °C for 16 h. After cooling to ambient temperature, the suspension was filtered through a plug of Celite, all volatiles were removed under reduced pressure, and the thus-obtained residue was purified by column chromatography (silica gel, n-hexane–EtOAc, 9:1) to give 22 (31 mg, 68%) as a colorless solid along with B-nor-α-hydroxy methyl ester 12g (16 mg, 0.05 mmol, 21%).
Yield (22): 31 mg (0.1 mmol, 68%); [α]D 20 –25.9 (c 1.00, CHCl3); Rf = 0.32 (n-hexane–EtOAc, 9:1, CAM [green]).
IR (neat): 2963 (m), 2922 (m), 2359 (m), 2342 (w), 1720 (m), 1693 (s), 1654 (w), 1455 (w), 1365 (w), 1293 (m), 1141 (w), 1100 (w), 991 (w), 876 (m) cm–1.
1H NMR (CDCl3, 500 MHz): δ = 4.70 (s, 1 H), 4.66 (s, 1 H), 2.77 (dd, J = 12.1, 10.4 Hz, 1 H), 2.58–2.49 (m, 1 H), 2.38–2.28 (m, 2 H), 2.00–1.41 (m, 10 H), 1.32–1.24 (m, 1 H), 1.23 (s, 3 H), 1.23–1.25 (m, 1 H), 1.19 (t, J = 10.5 Hz, 1 H), 1.10 (s, 1 H), 0.85 (s, 3 H).
13C NMR (CDCl3, 126 MHz): δ = 198.2, 197.1, 159.7, 101.7, 50.5, 50.3, 48.7, 45.7, 45.4, 44.6, 40.9, 34.8, 34.1, 29.5, 25.8, 25.4, 23.0, 19.4, 18.6, 15.9.
HRMS (ESI): m/z [M + Na]+ calcd for C20H26NaO2: 321.1825; found: 321.1811.
#
#
Acknowledgment
Dr. Peter Witte is acknowledged for his help in measuring optical rotations.
Supporting Information
- Supporting information for this article is available online at https://doi.org/10.1055/s-0036-1591883.
- Supporting Information
-
References
- 1a Lin W.-H. Fang J.-M. Cheng Y.-S. Phytochemistry 1998; 48: 1391
- 1b Lu Y. Chen C.-X. Ni W. Hua Y. Liu H.-Y. Steroids 2010; 75: 982
- 2a Kasal A. Tetrahedron 2000; 56: 3559
- 2b Kasal A. Krištofíková Z. Buděšínský M. Tetrahedron 2007; 63: 11355
- 3 Ratnaweera PB. Williams DE. Patrick BO. de Silva ED. Andersen RJ. Org. Lett. 2015; 17: 2074
- 4 Liu J. Yang C. Zhang J. Wu J. Chen Y. Nat. Prod. Res. 2017; 31: 175
- 5 Cygan NK. Scheinost JC. Butters TD. Wentworth PJr. Biochemistry 2011; 50: 2092
- 6a Wentworth PJr. McDunn JE. Wentworth AD. Takeuchi C. Nieva J. Jones T. Bautista C. Ruedi JM. Gutierrez A. Janda KD. Babior BM. Eschenmoser A. Lerner RA. Science 2002; 298: 2195
- 6b Wentworth PJr. Wentworth AD. Zhu X. Wilson IA. Janda KD. Eschenmoser A. Lerner RA. Proc. Natl. Acad. Sci. U.S.A. 2003; 100: 1490
- 6c Babior BM. Takeuchi C. Ruedi J. Gutirrez A. Wentworth PJr. Proc. Natl. Acad. Sci. U.S.A. 2003; 100: 3031
- 6d Wentworth PJr. Nieva J. Takeuchi C. Galve R. Wentworth AD. Dilley RB. DeLaria GA. Saven A. Babior BM. Janda KD. Eschenmoser A. Lerner RA. Science 2003; 302: 1053
- 7a Brinkhorst J. Nara SJ. Pratt DA. J. Am. Chem. Soc. 2008; 130: 12224
- 7b Tomono S. Miyoshi N. Shiokawa H. Iwabuchi T. Aratani Y. Higashi T. Nukaya H. Ohshima H. J. Lipid Res. 2011; 52: 87
- 8a Wei X. Rodríguez AD. Wang Y. Franzblau SG. Bioorg. Med. Chem. Lett. 2008; 18: 5448
- 8b Gan C. Fan L. Cui J. Huang Y. Jiao Y. Wie W. Steroids 2012; 77: 1061
- 8c Cui J. Qi B. Gan C. Liu Z. Huang H. Lin Q. Zhao D. Huang Y. Mar. Drugs 2015; 13: 2488
- 9a Liu X. Pan X. Liang XT. Acta Chim. Sin. 1987; 45: 821
- 9b Guo JS. Liang XT. Chin. Chem. Lett. 1991; 2: 189
- 9c Guo JS. Liang XT. Youji Huaxue 1991; 11: 425
- 10 McMorris TC. Patil PA. J. Org. Chem. 1993; 58: 2338
- 11 Zhou W.-S. Zhou Y.-P. Jiang B. Synthesis 1989; 426
- 12a Stoltz BM. Wood JL. Tetrahedron Lett. 1996; 37: 3929
- 12b Burke AJ. Marques CS. Mini-Rev. Org. Chem. 2007; 4: 310
- 13a Schneider TF. Kaschel J. Werz DB. Angew. Chem. Int. Ed. 2014; 53: 5504 ; Angew. Chem. 2014, 126, 5608
- 13b Reissig H.-U. Small Ring Compounds in Organic Synthesis III. In Topics in Current Chemistry. Vol. 144. Springer; Berlin: 1988: 73
- 14a Heinze RC. Lentz D. Heretsch P. Angew. Chem. Int. Ed. 2016; 55: 11656 ; Angew. Chem. 2016, 128, 11828
- 14b Heinze RC. Heretsch P. Synlett 2017; 28: 1127
- 15 Zhang H.-B. Zhang H.-Y. Pan B.-C. Chin. Sci. Bull. 1990; 35: 420
- 16a Grenville V. Patel DK. Petrow V. Stuart-Webb A. Williamson DM. J. Chem. Soc. 1957; 4105
- 16b Litvinovskaya RP. Baranovsky AV. Averkova MA. Khripach VA. Russ. J. Bioorg. Chem. 2007; 33: 320
- 17 Marwah P. Marwah A. Lardy HA. Miyamoto H. Chang C. Bioorg. Med. Chem. 2006; 14: 5933
- 18 Monti L. Berliner DL. Jennings-White CL. Adams NW. (Pherin Pharmaceuticals, Inc.) PCT Int. Appl WO 02/089814 A1, 2002
-
References
- 1a Lin W.-H. Fang J.-M. Cheng Y.-S. Phytochemistry 1998; 48: 1391
- 1b Lu Y. Chen C.-X. Ni W. Hua Y. Liu H.-Y. Steroids 2010; 75: 982
- 2a Kasal A. Tetrahedron 2000; 56: 3559
- 2b Kasal A. Krištofíková Z. Buděšínský M. Tetrahedron 2007; 63: 11355
- 3 Ratnaweera PB. Williams DE. Patrick BO. de Silva ED. Andersen RJ. Org. Lett. 2015; 17: 2074
- 4 Liu J. Yang C. Zhang J. Wu J. Chen Y. Nat. Prod. Res. 2017; 31: 175
- 5 Cygan NK. Scheinost JC. Butters TD. Wentworth PJr. Biochemistry 2011; 50: 2092
- 6a Wentworth PJr. McDunn JE. Wentworth AD. Takeuchi C. Nieva J. Jones T. Bautista C. Ruedi JM. Gutierrez A. Janda KD. Babior BM. Eschenmoser A. Lerner RA. Science 2002; 298: 2195
- 6b Wentworth PJr. Wentworth AD. Zhu X. Wilson IA. Janda KD. Eschenmoser A. Lerner RA. Proc. Natl. Acad. Sci. U.S.A. 2003; 100: 1490
- 6c Babior BM. Takeuchi C. Ruedi J. Gutirrez A. Wentworth PJr. Proc. Natl. Acad. Sci. U.S.A. 2003; 100: 3031
- 6d Wentworth PJr. Nieva J. Takeuchi C. Galve R. Wentworth AD. Dilley RB. DeLaria GA. Saven A. Babior BM. Janda KD. Eschenmoser A. Lerner RA. Science 2003; 302: 1053
- 7a Brinkhorst J. Nara SJ. Pratt DA. J. Am. Chem. Soc. 2008; 130: 12224
- 7b Tomono S. Miyoshi N. Shiokawa H. Iwabuchi T. Aratani Y. Higashi T. Nukaya H. Ohshima H. J. Lipid Res. 2011; 52: 87
- 8a Wei X. Rodríguez AD. Wang Y. Franzblau SG. Bioorg. Med. Chem. Lett. 2008; 18: 5448
- 8b Gan C. Fan L. Cui J. Huang Y. Jiao Y. Wie W. Steroids 2012; 77: 1061
- 8c Cui J. Qi B. Gan C. Liu Z. Huang H. Lin Q. Zhao D. Huang Y. Mar. Drugs 2015; 13: 2488
- 9a Liu X. Pan X. Liang XT. Acta Chim. Sin. 1987; 45: 821
- 9b Guo JS. Liang XT. Chin. Chem. Lett. 1991; 2: 189
- 9c Guo JS. Liang XT. Youji Huaxue 1991; 11: 425
- 10 McMorris TC. Patil PA. J. Org. Chem. 1993; 58: 2338
- 11 Zhou W.-S. Zhou Y.-P. Jiang B. Synthesis 1989; 426
- 12a Stoltz BM. Wood JL. Tetrahedron Lett. 1996; 37: 3929
- 12b Burke AJ. Marques CS. Mini-Rev. Org. Chem. 2007; 4: 310
- 13a Schneider TF. Kaschel J. Werz DB. Angew. Chem. Int. Ed. 2014; 53: 5504 ; Angew. Chem. 2014, 126, 5608
- 13b Reissig H.-U. Small Ring Compounds in Organic Synthesis III. In Topics in Current Chemistry. Vol. 144. Springer; Berlin: 1988: 73
- 14a Heinze RC. Lentz D. Heretsch P. Angew. Chem. Int. Ed. 2016; 55: 11656 ; Angew. Chem. 2016, 128, 11828
- 14b Heinze RC. Heretsch P. Synlett 2017; 28: 1127
- 15 Zhang H.-B. Zhang H.-Y. Pan B.-C. Chin. Sci. Bull. 1990; 35: 420
- 16a Grenville V. Patel DK. Petrow V. Stuart-Webb A. Williamson DM. J. Chem. Soc. 1957; 4105
- 16b Litvinovskaya RP. Baranovsky AV. Averkova MA. Khripach VA. Russ. J. Bioorg. Chem. 2007; 33: 320
- 17 Marwah P. Marwah A. Lardy HA. Miyamoto H. Chang C. Bioorg. Med. Chem. 2006; 14: 5933
- 18 Monti L. Berliner DL. Jennings-White CL. Adams NW. (Pherin Pharmaceuticals, Inc.) PCT Int. Appl WO 02/089814 A1, 2002
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_f1_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s1_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s2_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s3_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1-1a_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1-2a_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1-5b_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1-6b_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/i_z0699_t1-7a_10-1055_s-0036-1591883.gif)
![](https://www.thieme-connect.de/media/synthesis/201804/thumbnails/i_z0699_s4_10-1055_s-0036-1591883.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)