Dedicated to the memory of Prof. Félix Serratosa, a pioneer of organic synthesis in Spain
1
Introduction
Fluxional molecules are dynamic structures that rapidly interchange between a number of constitutional isomers through low-energy rearrangements.[1 ] These shapeshifting molecules have been crucial in the study of the fundamental concept of valence tautomerization. This phenomenon is based on the rapid rupture and formation of single and/or double bonds without migration of atoms or groups. A classical example of a fluxional molecule is bullvalene (1 ), with chemical formula C10 H10 ; this is also one of the most popular examples of this type of molecule. This molecule can be seen as a tetracyclic cage-type structure formed by three units of 3,4-homotropylidene that undergo rapid [3.3] sigmatropic rearrangements (Scheme [1 ]).[2 ]
[3 ]
Antonio M. Echavarren received his Ph.D. at the Universidad Autónoma de Madrid (UAM, 1982). After a postdoctoral stays in Boston College and Colorado State University he joined the Institute of Organic Chemistry of the CSIC in Madrid. In 1992 he returned to the UAM as a Professor and in 2004 he moved to Tarragona as a Group Leader at the Institute of Chemical Research of Catalonia (ICIQ). He has been Liebig Lecturer (2006), Abbot Lecturer (University of Illinois at Urbana-Campaign, 2009), Schulich Visiting Professor (Technion, Haifa, 2011), Sir Robert Robinson Distinguished Lecturer (University of Liverpool, 2011), Novartis Lecturer in Organic Chemistry (Massachusetts Institute of Technology, 2015), and Kurt Alder Lecturer 2017 (University of Cologne). In 2012 he got a European Research Council Advanced Grant and in 2014 he was the president of the 49th EUCHEM Conference on Stereochemistry (Bürgenstock conference). Prof. Echavarren is a member of the International Advisory Board of Organic & Biomolecular Chemistry, Chemical Society Reviews, Advanced Synthesis and Catalysis, and Organic Letters, member of the Editorial Board of Chemistry European Journal, and Associate Editor of Chemical Communications. He is a Fellow of the Royal Society of Chemistry. He received the 2004 Janssen-Cylag Award in Organic Chemistry and the 2010 Gold Medal of the Royal Spanish Chemical Society as well as an Arthur C. Cope Scholar Award from the ACS in 2015. Since January 2018, he is the President of the Spanish Royal Society of Chemistry.Sofia Ferrer was born in Benissa (Alicante, Spain) in 1989. After a six-month stay in the University of Aarhus (Aarhus, Denmark) as an Erasmus student and a five-month relocation at Appalachian State University (North Carolina, USA) she received her B.Sc. degree in Chemistry from Universidad de Alicante (Alicante, Spain) in 2013. She obtained her M.Sc. at the Universitat Rovira i Virgili (Tarragona, Spain) in 2014. Since then she has been carrying out her Ph.D. studies under the supervision of Prof. Antonio Echavarren at the Institute of Chemical Research of Catalonia (ICIQ) working on the development of novel gold(I)-catalyzed reactions and their application to the synthesis of complex natural and unnatural products.
Scheme 1 3,4-Homotropylidene and bullvalene
A molecule such as bullvalene (1 ), with ten distinguishable positions and three symmetry axes, possesses 1,209,600 degenerated interconvertible tautomers, thus it is a key structure in the understanding of valence tautomerization (Scheme [2 ]).[4 ]
[5 ]
[6 ] A lower number of constitutional isomers are possible for substituted bullvalenes.[7–9 ]
Scheme 2 Fluxionality in bullvalene
In bullvalene (1 ) all C–C bonds are in continuous movement due to multiple and fast degenerated Cope rearrangements. As a consequence, all carbon and hydrogen atoms of the molecule are equivalent on the nuclear magnetic resonance timescale, consisting of a single broad signal in the 1 H NMR spectrum at room temperature and a sharp signal at high temperatures (ca. 120 °C) (Figure [1 ]). However, at temperatures around –60 °C, the four aliphatic and the six olefinic protons of the molecule give rise to distinct signals.[10 ]
Figure 1 Image of variable temperature 1 H NMR spectra of bullvalene in CDCl3 at 25 °C and in (CD3 )2 CO at –90 °C
The structure and properties of bullvalene (1 ) were predicted by von Doering and Roth in 1963,[3a ] as a part of a study on thermal rearrangements. These investigations led to the conclusion that the particular structure of bullvalene that forces its three 3,4-homotropylidene units to adopt a boatlike conformation would be ideal for fast and multiple degenerate Cope rearrangements assisted by strain release.[11 ] Anecdotally, the name bullvalene was derived from the nickname of von Doering, known by his students as the ‘bull’, due to the feared and tough research group seminars, and was chosen to rhyme with fullvalene, another molecule of great interest for the group at that time.
Since the theoretical design of bullvalene (1 ) in 1963,[3a ] this unique molecule has attracted the curiosity of the organic synthetic community. Significant synthetic efforts have led to the development of expedient syntheses of 1 that have constituted the basis of extensive studies in bullvalene chemistry and have enabled the preparation of many substituted derivatives. The constant evolution of synthetic methodology has allowed considerably shortening of the preparation of 1 and its derivatives along the years, facilitating the access and exploration of these fluxional molecules.
2
Classical Syntheses of Bullvalenes
2.1
Preparation of Bullvalene
Shortly after the prediction of the structure and properties of bullvalene, this molecule was serendipitously obtained in 1963 by Schröder and co-workers while exploring the photochemistry of cyclooctatetraene dimers.[4a ]
[b ]
[c ] Despite the low overall yield (6%), this two-step synthesis of bullvalene (1 ), consisting of the dimerization of cyclooctatetraene (2 ) at 100 °C and subsequent photochemical opening of the dimer 3 (Scheme [3 ]) with the consequential formation of benzene as byproduct, constitutes one of the shortest preparations of 1 to date.
Scheme 3 The first synthesis of bullvalene (Schröder and co-workers)
In 1966, the von Doering group developed a different synthetic strategy for the preparation of bullvalene (1 ) via the UV irradiation of 4a,8a-dihydronaphthalene (5 ), prepared by thermal partial decomposition of the Nenitzescu hydrocarbon 4 at 301 °C.[12 ] Although short, this synthesis was impractical due to the formation of naphthalene and other undetermined products that were difficult to separate from 1 (Scheme [4 ]).
Scheme 4 Synthesis of bullvalene (von Doering group)
Another synthetic procedure designed by Jones and Scott was based on the UV irradiation of bicyclo[4.2.2]deca-2,4,7,9-tetraene (8a ) to afford 1 cleanly in 64% yield.[13 ] The main drawback of this protocol was the tedious synthesis of 8a , which was also low yielding.[14 ] This preparation commenced with Cu(II)-promoted thermal decomposition of diazoacetic ester in the presence of cyclooctatetraene (2 ) to afford methyl bicyclo[6.1.0]nona-2,4,6-triene-9-carboxylate (6 ) (Scheme [5 ]). Conversion of 6 into the sodium salt of tosylhydrazone 7 was accomplished via the corresponding acid, generation of the acid chloride, reduction to the aldehyde, and formation of the tosylhydrazone. Thermal decomposition of the tosylhydrazone sodium salt 7 at 90–120 °C led to a complex mixture of C10 H10 products including 8a , which was obtained in 38% yield.
Scheme 5 Synthesis of bullvalene (Jones and Scott)
With the aim of improving his first synthetic design of bullvalene (1 ), the von Doering group envisioned a new synthetic route to 1 through barbaralone (9a ) and bullvalone (10a ), (Scheme [6 ]).[3b ] The aforementioned molecules 9a and 10a also undergo low energy Cope rearrangements, leading to two constitutional isomers respectively.[6c ]
[15 ]
Scheme 6 Retrosynthesis of bullvalene through barbaralone and bullvalone (von Doering group)
In the case of barbaralone (9a ), the two possible isomers are degenerated, whereas for bullvalone (10a ), the one carbon homologue of 9a , the equilibrium is dominated by the most stable isomer (Scheme [7 ]).
Scheme 7 Fluxionality in barbaralone and bullvalone
This synthesis, 1967, started with the Buchner reaction of ethyl diazoacetate with benzene under harsh conditions and long reaction times to give cycloheptatriene 11 (Scheme [8 ]).[3b ] Hydrolysis of the ester in 11 to the carboxylic acid, followed by reaction with SOCl2 led to the acyl chloride 13 , which reacted with diazomethane to afford diazomethyl ketone 14 . Treatment of 14 with CuSO4 in a mixture of benzene/hexane under reflux led to barbaralone (9a ). In 1998, the Buchner reaction was improved by Johnston and co-workers by using a Rh salt as the catalyst, which allowed the temperature to be decreased to 45 °C and the reaction time reduced to 8–10 hours.[16 ] One-carbon homologation of barbaralone (9a ) with diazomethane led to bullvalone (10a ) in 24% yield, along with isomeric aldehyde 10a′ (25% yield). Reduction of the ketone functionality of 10a with NaBH4 gave 15 , which was acetylated with acetic anhydride in pyridine at 130 °C to form 16 (40%, two steps). The final step involved a challenging pyrolysis of 16 at very high temperature (345 °C) to afford bullvalene (1 ).
Scheme 8 Synthesis of bullvalene through barbaralone and bullvalone (von Doering group)
In 1972, a new synthesis of bullvalene (1 ) was designed by the Serratosa group (Scheme [9 ]).[17 ] This route allowed the preparation of 1 in three steps from tris(3-diazo-2-oxopropyl)methane [methane(tri-α-diazoacetone); 21 ]. Tris-diazoketone 21 was synthesized in five steps from methyl ester 17 by Wittig reaction, reduction of the with Adams’ catalyst, hydrolysis of the esters, conversion into the acyl chloride with PCl5 , and reaction with diazomethane.[18 ] Reaction of 21 in the presence of CuSO4 in xylene at reflux under high dilution conditions afforded tricyclo[3.3.2.02,8 ]decane-3,7,9-trione (‘bullvalenetrione’, 22 ) in ca. 2% yield. The yield of this reaction could be improved to 4% by employing soluble copper chelates as catalysts. Despite the low yields, this is a remarkable transformation in which three C–C bonds are formed. Reaction of 22 with p -toluenesulfonyl hydrazide led to tris-tosylhydrazone 23 , which was converted into bullvalene (1 ) in 20% yield by treatment with excess methyllithium under Shapiro reaction conditions.[19 ] Overall, this synthesis of 1 was completed in 8 steps and ca. 0.3% overall yield.
Scheme 9 Synthesis of bullvalene from ‘bullvalenetrione’ (Serratosa group)
Scheme 10 Synthesis of bullvalene from barbaralone (Serratosa group)
The Serratosa group developed another route to 1 inspired by the procedure of the von Doering group presented in Scheme 8[3b ] but applying some of the reactions employed in their first approach.[17 ] In this route, barbaralone (9a ) was prepared more efficiently from 14 by a modified procedure using copper(II) acetylacetonate as soluble copper catalyst (Scheme [10 ]).[20 ] Homologation of 9a with diazomethane led to 10a , which reacted with p -toluenesulfonyl hydrazide in acetic acid to give tosylhydrazone 24 in 70% yield through an unexpected rearrangement (see mechanism in Scheme [10 ]). Anionic fragmentation of the tosylhydrazone 24 with excess methyllithium gave 8a in 36% yield. Hydrocarbon 8a , reported by Jones and Scott in their approach to bullvalene (1 ) (see Scheme [5 ]),[13 ] was converted into 1 by UV irradiation in 82% yield. In this way, 1 was prepared in 9 steps in ca. 2% overall yield.
2.2
Syntheses of Substituted Bullvalenes
During the 1970s, progress made in the synthesis of bullvalene (1 ) led to numerous studies on its fluxional behavior along with the preparation of a variety of mono- and polysubstituted bullvalenes. The synthesis of substituted bullvalenes was accompanied by interesting investigations, mainly based on NMR studies, on the study of their equilibria.[21 ] Most substituted bullvalenes were synthesized from the parent unsubstituted bullvalene (1 ). Monosubstituted bullvalenes were normally derived from a common bromobullvalene intermediate 25 usually prepared in two steps by dibromination of 1 with Br2 followed by dehydrobromination with KOt Bu (Scheme [11 ]).[22 ] Chlorobullvalene (26 ) could be also synthesized similarly by chlorination with SO2 Cl2 and subsequent elimination of HCl by reaction with KOt Bu (Scheme [11 ]).[21 ]
Scheme 11 Preparation of bromobullvalene and chlorobullvalene from bullvalene
Monosubstituted bullvalenes possess around 1.2 ×·106 valence isomers, but in contrast to the parent bullvalene (1 ), all these isomers are not structurally equivalent. For monosubstituted bullvalenes there are four possible positional isomers A1
, A2
, B , and C (Scheme [12 ]), which can be interconverted at room temperature by Cope rearrangements.[21 ] The equilibrium between these four positional isomers is dynamic at high temperatures, although it can be frozen at low temperatures.[4d ]
[22 ] The equilibrium composition is influenced by the nature of the substituent R.[22 ] Although in most cases the substituent preferentially occupies an olefinic position (A1
and/or A2
), there are some exceptions. Thus, the fluoro group stays preferentially at the methine carbon (C ),[21 ] and hydroxymethyl (CH2 OH), methoxymethyl (CH2 OMe), and acetoxymethyl (CH2 OAc) groups show a slight preference for the aliphatic positions on bullvalene (B ).[23 ]
Scheme 12 The four possible positional isomers for monosubstituted bullvalenes
Phenylbullvalene (27 )[24 ] and methylbullvalene (28 )[25 ] were prepared from bromobullvalene (25 ) by reaction with Ph2 CuLi and Me2 CuLi, respectively (Scheme [13 ]). Phenylbullvalene (27 ) was found to be in a 3:1 equilibrium between the 4- and 3-substituted isomers,[24 ] whereas methylbullvalene (28 ) appeared to be in a 1.2:1 equilibrium between the 4- and 3-substituted isomers.[25 ] Alternatively, methylbullvalene (28 ) was also synthesized by addition of methylmagnesium bromide and CoCl2 to bromobullvalene.[21 ] The preparation of (alkylthio)bullvalene 29 was achieved by refluxing bromobullvalene (25 ) with copper(I) mercaptides in pyridine and quinoline.[26 ]
Scheme 13 Synthesis of phenylbullvalene, methylbullvalene, and thioethers of bullvalene
Scheme 14 Synthesis of monosubstituted bullvalenes derived from bullvalene Grignard compound
The bullvalene Grignard derivative 30 was prepared by reaction of 25 with magnesium (Scheme [14 ]).[27 ] Reagent 30 was further transformed into bullvalenecarboxylic acid (31 ) by reaction with CO2 , dibullvalene (32 ) by reaction with bromobullvalene (25 ) in the presence of CoCl2 , and iodobullvalene (33 ) by reaction with I2 .[21 ]
[27 ] Compound 33 was used as starting material for the synthesis of fluorobullvalene (34 ) by reaction with AgF.[21 ]
Alkoxybullvalenes (36 ) with methoxy, ethoxy, isopropoxy, and tert -butoxy groups have been obtained by addition of the corresponding potassium alkoxides to bromobullvalene (25 ).[22 ] These reactions presumably proceed through intriguing dehydrobullvalene intermediate 35 (Scheme [15 ]).[22 ] All substituted bullvalenes showed temperature-dependent NMR spectra.[21 ]
Scheme 15 Preparation of alkoxybullvalenes
Disubstituted bullvalenes have been commonly prepared from dibromobullvalene (37 ), obtained from bromobullvalene (25 ) by another sequence of dibromination/dehydrobromination (Scheme [16 ]).[28 ] Interestingly, when dry KOt Bu in benzene was used instead of KOt Bu in t BuOH and benzene in the dehydrobromination, di-tert -butoxybullvalene (38 ) was obtained.[21 ]
Scheme 16 Preparation of dibromobullvalene
A wide range of disubstituted bullvalenes with identical substituents were obtained by functional group transformations in dibromobullvalene (37 ).[21 ]
[28 ]
[29 ] Reaction of 37 with NaCu(CN)2 led to dicyanobullvalene (39 ), which was further transformed by hydrolysis into bullvalenedicarboxylic acid (40 ) (Scheme [17 ]). Reaction of 40 with diazomethane led to the formation of dimethyl bullvalenedicarboxylate (41 ).[30 ] Bullvalenedicarbaldehyde (42 ) was obtained by reduction of the cyano groups in 39 with DIBAL-H. Further reduction of the aldehyde groups in 42 using LiAlH4 afforded bullvalenediol (43 ). On the other hand, reaction of 37 with Me2 CuLi or Ph2 CuLi gave dimethylbullvalene (44 ),[25 ] as a 2.3:3.3:1 mixture of valence, and diphenylbullvalene (45 ),[24 ] as a 7.6:5.7:1 mixture of 4,5-, 3,5-, and 3,7- disubstituted isomers.
Scheme 17 Synthesis of disubstituted bullvalenes
A different procedure for the synthesis of dimethyl bullvalenedicarboxylate (41 ) consisted of the irradiation of dimethyl cis -4a,8a-dihydronaphthalene-4a,8a-dicarboxylate (5′ ) in methanol by a low-pressure mercury lamp (Scheme [18 ]).[30 ] This transformation was mechanistically related to that found in the synthesis of 1 by Jones and Scott (see Scheme [5 ]).[13 ]
Scheme 18 Alternative preparation of dimethyl bullvalenedicarboxylate
Diphenylbullvalene (45 ) was alternatively prepared by reaction of tricarbonylcyclooctatetraeneiron (2′ ) with diphenylacetylene at high temperatures (ca. 165 °C) to form 8b , followed by UV irradiation (Scheme [19 ]).[31 ]
Scheme 19 Alternative preparation of diphenylbullvalene
Disubstituted bullvalenes bearing two different substituents have also been synthesized. The most common approach is based on the monosubstitution of one bromine atom in dibromobullvalene (37 ) by a cyano group through reaction with NaCu(CN)2 leading to bromocyanobullvalene (46 ) (Scheme [20 ]).[21 ]
[32 ] Further reduction of the cyano group in 46 with DIBAL-H afforded bromobullvalenecarbaldehyde (47 ), which was reduced with LiAlH4 to bromobullvalenol (48 ). Derivatives 49 , 50 ,[31 ] and 51
[26 ] were similarly obtained.
Scheme 20 Synthesis of differently disubstituted bullvalenes from dibromobullvalene
A different procedure for the synthesis of differently disubstituted bullvalenes involves the bromination/dehydrobromination of methylbullvalene (28 ) to afford bromo(methyl)bullvalene (52 ) (Scheme [21 ]). The bromine in 52 was further substituted by a cyano group through reaction with NaCu(CN)2 to give cyano(methyl)bullvalene (53 ).[31 ] Hydrolysis of the cyano moiety to the carboxylic acid and subsequent reaction with diazomethane led to methyl methylbullvalenecarboxylate (54 ).
Scheme 21 Synthesis of differently disubstituted bullvalenes from methylbullvalene
On the other hand, bromofluorobullvalene (55 ) was prepared from fluorobullvalene (34 ) by bromination/dehydrobromination (Scheme [22 ]).[21 ]
A variety of fused disubstituted bullvalenes have been obtained by Diels–Alder reaction between the dehydrobullvalene intermediate 35 , formed by reaction of bromobullvalene (25 ) with potassium alkoxides, and various dienes such as furan, 1,3-diphenylisobenzofuran (57 ), and tetraphenylcyclopentadienone 58 (Scheme [23 ]).[21 ]
[23 ] The expected direct Diels–Alder adducts 56a and 57a , formed by reaction of 35 with furan and 57 , respectively, were not observed due to their high strain. Instead, these adducts undergo rapid rearrangement to the more stable isomers 56b and 57b . Products 56b , 57b , and 59 showed temperature-dependent NMR spectra, evidencing their dynamic situation.[21 ]
Scheme 22 Synthesis of bromofluorobullvalene from fluorobullvalene
Scheme 23 Synthesis of fused disubstituted bullvalenes
Different trisubstituted bullvalenes were synthesized from parent tribromobullvalene (60 ), prepared by bromination/dehydrobromination of dibromobullvalene (37 ). Reaction of 60 with Me2 CuLi led to trimethylbullvalene (61 ), whereas treatment with Ph2 CuLi afforded triphenylbullvalene (62 ), which was found in a 1:1.96:1.04 equilibrium between the 4,5,10-, 4,5,9-, and 3,7,10-isomers (Scheme [24 ]).[24 ]
Scheme 24 Synthesis of trisubstituted bullvalenes
The same bromination/dehydrobromination sequence was employed for the synthesis of tetra- (63 ), penta- (66 ), and hexabromobullvalenes (68 ) (Scheme [25 ]).[8 ] Slower rearrangements were observed for pentabromobullvalene (66 ), whereas no fluxional behavior was recognized in hexabromobullvalene (68 ), which was obtained as a single isomer.[8b ] Tetramethylbullvalene (64 ) was formed by reaction of tetrabromobullvalene (63 ) with Me2 CuLi.[25 ] Tetraphenylbullvalene (65 ), obtained by reaction of 63 with Ph2 CuLi was found to be in a 4.2:5.9:1 equilibrium between the 1,4,5,10-, 1,3,5,10-, and 1,3,7,10-isomers.[24 ] Penta- (67 ) and hexaphenylbullvalenes (69 ) were similarly prepared. As in the case of hexabromobullvalene (68 ), in hexaphenylbullvalene (69 ) the fluxional behavior was lost.[24 ]
Scheme 25 Synthesis of tetra-, penta-, and hexasubstituted bullvalenes
3
Recent Developments in the Synthesis of Bullvalenes
Scheme 26 Synthesis of a key triketone
The constant development in the field of synthetic organic along with the discovery of novel reactivities and methodologies has enabled ingenious new syntheses of bullvalene and highly substituted bullvalenes. An innovative syntheses of substituted bullvalenes has been developed by the Bode group, finding interesting applications of the corresponding products in supramolecular adaptive binding and sensing.[9a ]
[b ]
[33a ]
[d ] In this bullvalene synthesis, cycloheptanone (70 ) was used as the starting material (Scheme [26 ]). Protection of cycloheptanone (70 ) with ethylene glycol gave acetal 71 , which then was subjected to dibromination to give 72 . Bromide elimination and acid hydrolysis provided cycloheptadienone 73 , which underwent Mukaiyama–Michael addition of silyl enol ether 74 to give enone 75 . Enedione 76 was obtained from 75 by allylic oxidation of 75 with diacetoxyiodobenzene and tert -butyl hydroperoxide. Conversion of 76 into the carboxylic acid 77 by treatment with trifluoroacetic acid, followed by reaction with tetrahydrothiophene-derived sulfur ylide 78 , via a mixed anhydride, gave product 79 , which was treated with scandium triflate to trigger the intramolecular cyclopropanation that provided triketone 80 , a key intermediate for further functionalizations.
Triketone 80 was transformed to diallylbullvalene 84 in three steps (Scheme [27 ]).[9a ]
[b ]
[33a ] Addition of allylmagnesium bromide to 80 afforded two diastereomeric diols, meso 81a and chiral 81b . Meso 81a was transformed into diallylbullvalone 82 by treatment with pyridine and thionyl chloride. The same reaction conditions applied to chiral 81b led to furan product 83 . On the other hand, treatment of chiral 81b with diisopropylethylamine and thionyl chloride followed by pyridine provided 82 . Finally, enolization of diallylbullvalone 82 and trapping of the enolate with isobutyl chloroformate gave diallylbullvalene 84 . Therefore, tetrasubstituted bullvalene 84 , with three different substituents and 840 possible interconvertible constitutional isomers, was obtained in 11 steps from cycloheptanone (70 ). Diallylbullvalene 84 constitutes a versatile intermediate whose two allyl moieties can be further employed for the attachment of other relevant functional groups.
Scheme 27 Synthesis of diallylbullvalene
Since 2000, gold(I) catalysis has emerged as a powerful tool for the construction of molecular complexity from simple substrates.[34 ] The ability of cationic gold(I) complexes to promote a wide variety of enyne cyclizations along with the versatility of the intermediates accessed through these transformations has been utilized to develop expedient and efficient synthesis of bullvalene and substituted bullvalenes through the fluxional molecules barbaralone (9a ) and bullvalone (10a ) from readily available 7-ethynylcyclohepta-1,3,5-trienes (85 ) (Scheme [28 ]).[35 ]
Scheme 28 Gold(I)-catalyzed access to barbaralones
This new approach relies on a gold(I)-catalyzed oxidative cyclization of 85 in the presence of external oxidants such as diphenyl sulfoxide or pyridine N -oxides, to afford barbaralone (9a ) and other 1-substituted barbaralones under mild conditions and good to excellent yields (Scheme [28 ]).[35 ] The barbaralone synthesis proceeds by activation of the alkyne in 85 by gold(I), followed by attack of the external oxidant to form α-oxo gold(I) carbene 86 , which then undergoes intramolecular cyclopropanation to give barbaralone 9 . This transformation can be also seen as a gold(I)-catalyzed cyclization of 1,6-enyne 85 to afford gold(I) carbene 87 followed by oxidation.
Scheme 29 Synthesis of barbaralone and phenylbarbaralone
This new two-step approach to barbaralones constitutes one of the shortest, mildest, and most efficient synthesis of barbaralones 9 to date. Substrates 85 can be prepared in one step from the corresponding alkynes and commercially available tropylium tetrafluoroborate (Scheme [29 ]). Reaction of 85a and 85b in the presence of gold(I) catalyst [IPrAuNCMe]+ SbF6
– and diphenyl sulfoxide as external oxidant provided barbaralone (9a ) and phenylbarbaralone (9b ) in 97% and 83% yield, respectively.[35 ]
Bullvalone (10a ) and phenylbullvalone (10b ) were obtained in 37% and 22% yield, respectively through one-carbon homologation of the corresponding barbaralones 9a and 9b using diazo(trimethylsilyl)methane instead of explosive diazomethane employed in classic strategies (Scheme [30 ]).[36 ]
Scheme 30 Preparation of bullvalones by homologation of barbaralones
Bullvalene (1 ) and phenylbullvalene (27 ) were prepared from the corresponding bullvalones 10a and 10b via a two-step, one-pot procedure involving the formation of the enol triflates 86 and 87 and subsequent reduction under palladium catalysis in the presence of n Bu3 SnH (Scheme [31 ]).[37 ] This strategy allowed the preparation of bullvalene (1 ) and phenylbullvalene (27 ) in 5 steps and 10% and 7% overall yield, respectively, constituting one of the most efficient synthesis of these fluxional molecules to date. Moreover, disubstituted bullvalenes 45 , 88 , and 89 bearing two equal or two different groups were synthesized from phenylbullvalone (10b ) by formation of the enol triflate followed by Stille coupling.[38 ] Bullvalenes 45 , 88 , and 89 were found to be in 7.6:5.7:1, 5.2:1.5:1, 3.8:2.3:1 equilibria, respectively, with the 3,6- and 3,7-disubstituted isomers at –40 °C.[35 ]
Scheme 31 Synthesis of bullvalene and substituted bullvalenes
The latest synthesis of bullvalene (1 ) from 2018, as well as several mono- and disubstituted derivatives of 1 , has been achieved in just two steps and good overall yields by the Fallon and Pašteka groups.[39 ] This synthesis is based on a cobalt-catalyzed [6+2] cycloaddition of cyclooctatetraene (2 ) with terminal or internal alkynes to afford products 8 (Scheme [32 ]), previously encountered as intermediates in the synthesis of bullvalenes (see Schemes 5 and 10). UV irradiation of compounds 8 provided a wide range of bullvalenes in good yields, featuring substituents such as alcohols, alkyl, benzyl, and silyl groups. Bullvalene (1 ) was obtained in 60% yield over two steps. This procedure constitutes the shortest and most efficient synthesis of bullvalene and mono- and disubstituted bullvalenes to date. Nevertheless, this protocol does not enable the formation of aryl-substituted bullvalenes.
Scheme 32 Most recent synthesis of bullvalene and substituted bullvalenes
Interestingly the first[4a ] and the most recent[39 ] synthesis of bullvalene (1 ) are conceptually very similar, although after more than fifty years of research, the overall yield has been increased considerably and the most recent approach is much more versatile.
