CC BY-ND-NC 4.0 · Synthesis 2019; 51(05): 1196-1206
DOI: 10.1055/s-0037-1611656
feature
Copyright with the author

GlucoSiFA and LactoSiFA: New Types of Carbohydrate-Tagged Silicon-Based Fluoride Acceptors for 18F-Positron Emission Tomography (PET)

Anja Wiegand
a   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Organische Chemie, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: norbert.krause@tu-dortmund.de
,
Vera Wiese
a   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Organische Chemie, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: norbert.krause@tu-dortmund.de
,
Britta Glowacki
b   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Anorganische Chemie II, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: klaus.jurkschat@tu-dortmund.de
,
Ljuba Iovkova
a   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Organische Chemie, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: norbert.krause@tu-dortmund.de
,
Ralf Schirrmacher*
c   Department of Oncology, University of Alberta, 6820 116 Street, Edmonton, Alberta T6G 2R3, Canada
,
b   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Anorganische Chemie II, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: klaus.jurkschat@tu-dortmund.de
,
Norbert Krause*
a   Technische Universität Dortmund, Fakultät für Chemie und Chemische Biologie, Lehrstuhl für Organische Chemie, Otto-Hahn-Strasse 6, 44227 Dortmund, Germany   Email: norbert.krause@tu-dortmund.de
› Author Affiliations
Natural Sciences and Engineering Research Council of Canada (NSERC) research grant to R.S.
Further Information

Publication History

Received: 11 December 2018

Accepted: 17 December 2018

Publication Date:
24 January 2019 (online)

 


Published as part of the 50 Years SYNTHESISGolden Anniversary Issue

Abstract

GlucoSiFA derivatives bearing an azide or alkynyl side chain were obtained from peracetyl-d-glucose using as key step a tosylate substitution by a SiFA thiolate obtained from 4-(di-tert-butylfluorsilyl)benzenethiol. In analogy, two-fold SiFA-substituted maltose and lactose derivatives were synthesized via bistosylates. Introduction of an ­acetal-protecting group in β-d-azidolactose allowed the synthesis of a LactoSiFA derivative bearing only one SiFA moiety.


#

Biographical Sketches

Zoom Image

Anja Wiegand studied chemistry at the Faculty of Chemistry and Chemical Biology of TU Dortmund. She obtained her B.Sc. in 2012 and her M.Sc. in 2014. In 2018, she finished her Ph.D. work on carbohydrate-based NHC-gold complexes and SiFA compounds under the ­supervision of Prof. Dr. Norbert Krause.


Vera Wiese studied chemical biology at the Faculty of Chemistry and Chemical Biology of TU Dortmund. She obtained her B.Sc. in 2015 and her M.Sc. in 2018. For her Master’s thesis, she worked on the synthesis of discchararide-based SiFA compounds under the supervision of Prof. Dr. Norbert Krause.


Britta Glowacki studied chemistry at the Faculty of Chemistry and Chemical Biology of TU Dortmund. She obtained her B.Sc. in 2011 and her M.Sc. in 2013. In 2018, she finished her Ph.D. work on amino alcoholate derivatives of group XIV elements under the supervision of Prof. Dr. Klaus Jurkschat.


Ljuba Iovkova was born in Sofia, Bulgaria and moved to Germany to study pharmacy and chemistry. In 2006, she obtained her Diploma from the TU Dortmund. She carried out graduate work at the same university under the supervision of Prof. Dr. Klaus Jurkschat, earning a Ph.D. in chemistry in 2010. After researcher positions in the academic and industrial field she joined again the Faculty of Chemistry and Chemical Biology at the TU Dortmund in 2014 as Akademische Rätin.


Ralf Schirrmacher obtained his Ph.D. in nuclear chemistry from the University of Mainz in 1999. After a brief postdoctoral stay at the University of Pennsylvania, he continued research at the University of Mainz as a civil servant until 2007. In 2008 he was appointed Head of Radiochemistry and Director of Cyclotron at the McConnell Brain Imaging Center at the Montreal Neurological Institute (MNI) of McGill University. During his time at McGill University he held a Canada Research Chair in Molecular Imaging and Radiochemistry. He is currently a Full Professor in Oncologic Imaging at the Faculty of Medicine at the MICF and Cross Cancer Center at the University of Alberta at Edmonton. His research group develops new imaging agents for Positron Emission Tomography (PET) imaging in the field of oncology and neurology using a variety of different radionuclides such as carbon-11, fluorine-18, gallium-68, different radioisotopes of iodine and copper-64.


Klaus Jurkschat received his Ph.D. from Martin Luther University Halle-Wittenberg, Germany, in 1980 and habilitated in 1987 at the same university. After postdoctoral work with Jean-­Bernard Robert at CENG Grenoble, France, and Marcel Gielen/Rudolph Willem at VUB Brussels, Belgium, and staying as visiting researcher at SUNY Albany (with Henry G. Kuivila), N.Y., USA, and Deakin University Geelong (with Dainis ­Dakternieks), Vic. Australia, he went to Dortmund, Germany, where from 1994 to 2018 he was employed as a Full Professor for Inorganic Chemistry at the Technische Universität. He was a Guest Professor at Universite Bordeaux 1 (2000) and Universite Rennes 1 (2012). He is Editor-in-Chief of the journal ‘Main Group ­Metal Chemistry’ and author of approximately 320 publications. The chemistry of hypercoordinate main group element compounds in all its facets is in the center of his research interests.


Norbert Krause graduated from TU Braunschweig in 1984 and received his Ph.D. in 1986. After postdoctoral stays at the ETH Zürich and Yale University, he joined TU Darmstadt and obtained his Habilitation in 1993. In 1994, he moved to the University of Bonn as Associate Professor, before being appointed to his present position as Full Professor at TU Dortmund in 1998. He was a Fellow of the Japan Society for the Promotion of Science (JSPS) in 2003, 2009, and 2015, and Guest Professor at the Université Catholique de Louvain (2007), at the University of California, Santa Barbara, U.S.A. (2009), and at the École Supérieure de Physique et de Chimie Industrielles de la Ville de Paris (ESPCI), France (2009). He was a member of the Editorial Board of the European Journal of Organic Chemistry (2006–2013). His research focuses on sustainable coinage metal (copper, silver, and gold) catalysis, in particular with water as bulk solvent.

The introduction of positron emission tomography (PET) as a non-invasive method for medical diagnostic in vivo imaging has become an indispensable tool in precision medicine development.[1] PET not only helps to understand the complex interplay between biological targets such as receptors and enzymes and their cognate ligands but furthermore assists devising new therapeutic regimens based on non-invasive biological target validation. Besides PET, a straightforward example for diagnostic imaging is the use of X-rays that has revolutionized medicine. However, this method only yields anatomic/structural information whereas PET and related radioisotope-based imaging methodologies look directly at dynamic biological processes without interference. PET, in addition to magnetic resonance imaging (MRI) and computed tomography (CT), has proved to be an elegant and non-invasive method to elucidate in vivo biochemistry. It allows metabolic tracking of bioactive compounds and quantification of biochemical and/or enzymatic processes in living organisms. Among commonly used radioactive isotopes such as 11C, 13N, 15O, 18F, 64Cu, and 68Ga,[2] the use of fluorine-18 has become rather popular due to its favorable physical properties such as a half-life of 109.7 minutes that allows for longer synthesis times and remote shipment to local imaging facilities and a low positron energy leading to PET images of highest resolution.

There are different strategies for incorporating 18F into radiopharmaceuticals. On the one hand, fluorination at carbon atoms in both aromatic and aliphatic compounds can be achieved by electrophilic as well as nucleophilic reactions and a variety of appropriate reagents has been developed for this purpose.[2] [3] Alternatively, 18F can also be bound via isotopic exchange to non-carbon elements such as ­boron, aluminum, silicon, and phosphorus.[3a] These non-­canonical labeling concepts got momentum in the last two decades although some of the labeling principles have already been introduced to the literature as early as 1958[4] but remained dormant for many years. The progress achieved in these types of chemistry was regularly summarized in review articles.[3a] [5] Aryldialkylsilicon fluorides, ArR2SiF, in which the silicon atom is sufficiently protected with R = isopropyl[6] or tert-butyl[7a] substituents are stable under physiological conditions and undergo 19F to 18F isotopic ­exchange with good radiochemical yields. The tert-butyl-substituted variant is now widely known as SiFA methodology and has become popular in several research groups (Equation 1).[7b] [c] [d] [e]

Zoom Image
Equation 1 Isotope exchange in silicon-based fluoride acceptors (SiFA)

One last problem when using SiFA-substituted biomolecules for PET applications is the high lipophilicity caused by the organosilicon moiety. Sugars such as glucose are water-soluble and carbon-bound 18F-derivatives such a 2-[18F]fluo­rodeoxyglucose ([18F]FDG) are applied as PET radiotracers.[7e] [f] With this in mind and the intention to increase the water-solubility of the SiFA moiety, herein we report the synthesis and characterization of SiFA-substituted sugar derivatives that also contain a variety of functional groups that hold potential for subsequent protein conjugation by click-type chemistry.

Our synthesis of the β-d-azido-substituted GlucoSiFA derivative 5 (Scheme [1]) started with peracetyl-d-glucose (1; mixture of anomers), which was first brominated at the anomeric center with HBr/AcOH. The resulting α-d-glycosyl bromide underwent clean substitution with sodium azide to afford β-d-glycosyl azide 2. Both steps proceeded in excellent yield, as did the subsequent deprotection with sodium methoxide. A selective monotosylation at the primary hydroxy group of the unprotected β-d-azidoglucose gave the difunctionalized monosaccharide 3 in 72% yield. Finally, the desired GlucoSiFA derivative 5 was obtained in 74% yield (51% over 5 steps) by nucleophilic substitution of the tosylate with deprotonated 4-(di-tert-butylfluorsilyl)benzenethiol (4).[8] Due to the pronounced base sensitivity of SiFA derivatives, this step has to be carried out with bulky, less nucleophilic bases. In the event, potassium tert-butoxide in DMSO gave the best results.

Zoom Image
Scheme 1 Synthesis of β-d-azido-substituted GlucoSiFA derivative 5

Starting point of the synthesis of the β-d-alkynyl-substituted GlucoSiFA derivative 8 (Scheme [2]) was the Lewis acid catalyzed substitution of the anomeric acetyl group of peracetyl-d-glucose (1) with propargyl alcohol, which provided β-d-glycoside 6 in 76% yield. The following steps via monotosylate 7 proceeded as before and gave target molecule 8 in 33% yield over four steps.

Zoom Image
Scheme 2 Synthesis of β-d-alkynyl-substituted GlucoSiFA derivative 8

In order to further increase the hydrophilicity of carbohydrate-tagged SiFA derivatives, we next used disaccharides as starting material. Here, serious reactivity and selectivity issues were encountered. For example, even though β-d-azidogalactose can be monotosylated selectively at the primary hydroxy group, all attempts of a monotosylation of β-d-azidomelibiose (which also contains only one primary hydroxy group) failed and provided either mixtures of bistosylated products at low yield, or no product at all. We then shifted our attention to maltose and lactose as starting disaccharides and first prepared two-fold SiFA-substituted derivatives (Scheme [3]).

Zoom Image
Scheme 3 Synthesis of two-fold SiFA-substituted maltose and lactose derivatives 11 and 14

Whereas the tosylation of β-azido-d-maltose (9a) with pTsCl in pyridine proceeded rather sluggishly, the reactivity was strongly increased in the presence of zinc bromide.[9] Under these conditions, complete conversion was observed after 1 hour at –20 °C, and the bistosylate 10a was isolated in 50% yield. Both leaving groups could be replaced with SiFA moieties under standard conditions using 4 and tBuOK to afford the target molecule 11a in 67% yield. The corresponding SiFA-tagged β-alkynyl-d-maltose 11b was obtained in the same manner from 9b via bistosylate 10b in 31% and 55% yield, respectively.

Similar to the maltose derivatives, the corresponding β-azido- and alkynyl-substituted d-lactoses 12a/b could not be selectively monotosylated at one of the two primary hydroxy groups. Rather, the bistosylates 13a/b were obtained in 44% and 36% yield, which were converted into the two-fold SiFA-modified lactoses 14a/b in moderate yields (33/36%).

It is evident from these results that a protection of one of the two primary hydroxy groups is required for the synthesis of a disaccharide bearing only one SiFA unit. Gratifyingly, the presence of an axial OH group in the galactose ring of β-d-azidolactose 12a allows a selective acetalization to afford product 15 in 74% yield (Scheme [4]).[10] For this substrate, the selectivity of the tosylation was examined in detail (Table [1]).

Zoom Image
Scheme 4 Synthesis of β-d-azido-substituted LactoSiFA derivative 19

With 4 equivalents of zinc bromide and 5 equivalents of tosyl chloride in pyridine at –20 °C, a mixture of the desired monotosylate 16 (41% yield) and the bistosylate 17 (21% yield) was obtained after 10 minutes (Table [1], entry 1). Thus, not only the primary, but also the secondary hydroxy group at C-4′ are reactive under these conditions. As expected, increasing the reaction time up to 40 minutes favored the formation of the bistosylate 17 (entries 2–4); the best yield of the monotosylate 16 (49%) was obtained after 30 minutes and decreased to 30% after 40 minutes. Smaller amounts of pTsCl afforded a higher selectivity in favor of the monotosylate 16 (entries 5 and 6), which was isolated as the sole product in the presence of 1.3 equivalents of pTsCl (entry 6), albeit in a low yield of 30%. Interestingly, the tosylation of the corresponding lactose derivative bearing a propargyl glycoside instead of the azido group gave only a bistosylate bearing the tosyl groups at the 2-CH2 group and C-4. At this point, it is not clear which factors govern the regioselectivity of these transformations. Unfortunately, attempts to introduce other leaving groups (mesylate, 4-bromophenylsulfonate, bromide) failed.

The structural assignment of tosylation products 16 and 17 is based on extensive NMR studies. Moreover, both products were isolated in crystalline form and characterized by single crystal X-ray diffraction analysis. The quality of the crystals of monotosylate 16 was rather low and allowed only the structural assignment of the constitution, but not of the absolute stereochemistry of the acetal stereocenter. In contrast to this, the acetal stereocenter of the major isomer (87%) of bistosylate 17 (Figure [1]) shows S-configuration as estimated by the twin law of the measured crystal.[11] The X-ray diffraction analysis also proved the presence of the two tosyl groups at the 2-CH2 and 4′ positions.

Table 1 Tosylation of Disaccharide 15 a

Entry

ZnBr2·2 H2O (equiv)

pTsCl (equiv)

Time (min)

16 (Yield %)

17 (Yield %)

1

4

5

10

41

21

2

4

5

20

38

30

3

4

5

30

49

31

4

4

5

40

30

34

5

1.5

2

40

39

24

6

4

1.3

40

30

 0

a In pyridine at –20 °C.

Zoom Image
Figure 1 X-ray crystal structure of bistosylate 17

The protected monotosylated β-azido-d-lactose derivative 16 obtained in 49% yield under the conditions of Table [1], entry 3, was treated with the thiolate formed by deprotonation of 4-(di-tert-butylfluorsilyl)benzenethiol (4) with tBuOK. The SiFA-tagged lactose derivative 18 was isolated in 61% yield. Finally, acetal cleavage was achieved by heating 18 with 80% aqueous acetic acid to 70 °C for 4 hours. This afforded the desired β-d-azido-substituted LactoSiFA derivative 19 in 64% yield (14% over 4 steps from 12a) (Scheme [4]).

In conclusion, this work demonstrates the utility of carbohydrates for the synthesis of hydrophilic SiFA derivatives. The GlucoSiFA derivatives 5 and 8 bearing an azide or alkynyl handle for peptide and protein conjugation via 1,3-dipolar cycloaddition were obtained in a straightforward manner from peracetyl-d-glucose in 51% and 36% overall yield, respectively. The key step is the substitution of a tosylate by a SiFA thiolate obtained from 4-(di-tert-butylfluorsilyl)benzenethiol (4). In analogy, the two-fold SiFA-substituted maltose and lactose derivatives 11 and 14 are readily accessible in overall yields between 13% and 34%. Introduction of an acetal protecting group in β-d-azidolactose 12a allowed the synthesis of the LactoSiFA derivative 19 in 14% overall yield. Further work is devoted to improved procedures for the monofunctionalization of suitable carbohydrates, as well as, the synthesis of carbohydrate-tagged SiFA derivatives bearing different handles for protein conjugation.

Reactions were carried out under argon atmosphere using oven- or flame-dried glassware. Air- and moisture-sensitive reagents were transferred via syringe. All reagents were obtained commercially and used without further purification. THF, Et2O, CH2Cl2, and MeCN were dried using a MB-SPS-800 system (M. Braun). Reactions were monitored by TLC using silica gel 60 plates provided by Merck and ­Macherey-Nagel. Visualization was accomplished with UV light (254 nm), ceric ammonium molybdate, KMnO4, or anisaldehyde.

1H, 13C, 19F, and 29Si NMR spectra were recorded with Bruker Avance III HD (400–600 MHz) and calibrated against residual solvent peaks. IR spectra were obtained with a PerkinElmer Spectrum Two UATR spectrophotometer. Mass spectra were recorded with a Thermo Fisher Scientific TSQ (LCMS-ESI) and a Thermo Electron LTQ Orbitrap spectrometer (HPLC-ESI).

(3R,4S,5R,6R)-6-(Acetoxymethyl)tetrahydro-2H-pyran-2,3,4,5-tetrayltetraacetate (1),[12] (2R,3R,4S,5R,6R)-2-(acetoxymethyl)-6-bromo­tetrahydro-2H-pyran-3,4,5-triyltriacetate,[13] (2R,3R,4S,5R,6R)-2-(acet­oxymethyl)-6-azidotetrahydro-2H-pyran-3,4,5-triyltriacetate (2),[14] (2R,3R,4S,5S,6R)-2-azido-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol,[15] (2R,3R,4S,5R,6R)-2-(acetoxymethyl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3,4,5-triyltriacetate (6),[16] (2R,3S,4S,5R,6R)-2-(hydroxymethyl)-6-(prop-2-yn-1-yloxy)tetra­hydro-2H-pyran-3,4,5-triol,[17] (2S,3R,4S,5R,6R)-6-(acetoxymethyl)-5-{[(2R,3R,4S,5R,6R)-3,4,5-triacetoxy-6-(acetoxymethyl)-tetrahydro-2H-pyran-2-yl]oxy}tetrahydro-2H-pyran-2,3,4-triyltriacetate,[18] (2R,3R,4S,5R,6R)-2-(acetoxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacet­oxy-2-(acetoxymethyl)-6-bromotetrahydro-2H-pyran-3-yl]oxy}tetra­hydro-2H-pyran-3,4,5-triyltriacetate,[19] (2R,3R,4S,5R,6R)-2-(acet­oxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacetoxy-2-(acetoxymethyl)-6-azidotetrahydro-2H-pyran-3-yl]oxy}tetrahydro-2H-pyran-3,4,5-triyltriacetate,[20] (2R,3R,4S,5S,6R)-2-{[(2R,3S,4R,5R,6R)-6-azido-4,5-dihydroxy-2-(hydroxymethyl)tetrahydro-2H-pyran-3-yl]oxy}-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (9a),[21] (2R,3R,4S,5R,6R)-2-(acetoxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacet­oxy-2-(acetoxymethyl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3-yl]oxy}tetrahydro-2H-pyran-3,4,5-triyltriacetate,[22] (2R,3R,4S,5S,6R)-2-{[(2R,3S,4R,5R,6R)-4,5-dihydroxy-2-(hydroxymeth­yl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3-yl]oxy}-6-(hydroxy­methyl)tetrahydro-2H-pyran-3,4,5-triol (9b),[23] (3R,4S,5R,6R)-6-(acet­oxymethyl)-5-{[(2S,3R,4S,5S,6R)-3,4,5-triacetoxy-6-(acetoxymethyl)-tetrahydro-2H-pyran-2-yl]oxy}tetrahydro-2H-pyran-2,3,4-triyltriacetate,[24] (2R,3S,4S,5R,6S)-2-(acetoxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacetoxy-2-(acetoxymethyl)-6-bromtetrahydro-2H-pyran-3-yl]oxy}-tetrahydro-2H-pyran-3,4,5-triyltriacetate,[19] (2R,3S,4S,5R,6S)-2-(acet­oxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacetoxy-2-(acetoxymethyl)-6-azidotetrahydro-2H-pyran-3-yl]oxy}tetrahydro-2H-pyran-3,4,5-triyltriacetate,[20] (2S,3R,4S,5R,6R)-2-{[(2R,3S,4R,5R,6R)-6-azido-4,5-dihydroxy-2-(hydroxymethyl)tetrahydro-2H-pyran-3-yl]oxy}-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (12a),[25] (2R,3S,4S,5R,6S)-2-(acetoxymethyl)-6-{[(2R,3R,4S,5R,6R)-4,5-diacet­oxy-2-(acetoxymethyl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3-yl]oxy}tetrahydro-2H-pyran-3,4,5-triyltriacetate,[26] (2S,3R,4S,5R,6R)-2-{[(2R,3S,4R,5R,6R)-4,5-dihydroxy-2-(hydroxymeth­yl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3-yl]oxy}-6-(hydroxy­methyl)tetrahydro-2H-pyran-3,4,5-triol (12b),[26] and (4aR,6S,7R,8R)-6-{[(2R,3S,4R,5R,6R)-6-azido-4,5-dihydroxy-2-(hydroxymethyl)tetrahydro-2H-pyran-3-yl]oxy}-2-phenylhexahydropyrano[3,2-d][1,3]dioxin-7,8-diol (15)[10] are known compounds and were prepared according to literature procedures.


#

[(2R,3S,4S,5R,6R)-6-Azido-3,4,5-trihydroxytetrahydro-2H-pyran-2-yl]methyl 4-Methylbenzolsulfonate (3)

A solution of (2R,3R,4S,5S,6R)-2-azido-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (585 mg, 2.85 mmol, 1.0 equiv) in anhyd pyridine (6 mL) was cooled to 0 °C and treated with pTsCl (706 mg, 3.71 mmol, 1.3 equiv) in anhyd pyridine (3 mL). The mixture was stirred at rt for 24 h. The solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel, EtOAc); yield: 742 mg (72%); colorless solid.

IR (ATR): 3354, 3290, 2115, 1347, 1248, 1188, 1167, 1106, 1079, 1057, 1012, 967, 894, 813, 781, 705, 663, 552, 505 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.78 (d, J = 8.3 Hz, 2 H, ArH), 7.48 (d, J = 8.2 Hz, 2 H, ArH), 5.57 (d, J = 5.6 Hz, 1 H, CHOH), 5.34 (d, J = 5.7 Hz, 1 H, CHOH), 5.23 (d, J = 5.3 Hz, 1 H, CHOH), 4.51 (d, J = 8.7 Hz, 1 H, β-H1), 4.24 (dd, J 1 = 10.8 Hz, J 2 = 1.7 Hz, 1 H), 3.52 (ddd, J 1 = 9.8 Hz, J 2 = 6.5 Hz, J 3 = 1.7 Hz, 1 H), 3.16 (td, J 1 = 8.9 Hz, J 2 = 5.2 Hz, 1 H), 3.04 (td, J 1 = 9.4 Hz, J 2 = 5.6 Hz, 1 H), 2.95 (td, J 1 = 8.8 Hz, J 2 = 5.6 Hz, 1 H), 2.43 (s, 3 H, ArCH 3).

13C NMR (150 MHz, DMSO-d 6): δ = 132.6 (s, ipso-Ar), 130.6, 128.1 (2 d, Ar), 90.1 (d, CHN3), 76.5 (d, CHCH2), 75.7, 73.5, 70.3 (3 d, CHOH), 69.5 (t, CH2OH), 21.6 (q, ArCH3).


#

4-(Di-tert-butylfluorsilyl)benzenethiol (4)

The procedure published previously[8] was improved as follows. A solution of tBuLi in pentane (8.05 mL, 1.9 M, 15.3 mmol, 2.0 equiv) was added dropwise under magnetic stirring to a –78 °C cold solution of (4-bromophenylsulfanyl)-tert-butyldimethylsilane (2.32 g, 7.65 mmol, 1.0 equiv) in Et2O (50 mL). After stirring the reaction mixture for 25 min at –78 °C, di-tert-butyldifluorosilane (1.52 g, 8.41 mmol, 1.1 equiv) was added dropwise. The reaction mixture was allowed to warm up to rt over a period of 24 h and brine (50 mL) was added. The organic layer was separated, and the aqueous layer was extracted with Et2O (4 × 50 mL). The combined organic layers were dried (MgSO4). The filtrate was concentrated in vacuo to give 1-(tert-butyldimethylsilanylsulfanyl)-4-(di-tert-butylfluorosilanyl)benzene as a yellow oil that solidified (2.58 g, 6.70 mmol, 88%). The subsequent deprotection to afford 4 was carried out as described previously.[8]


#

(2R,3R,4S,5S,6S)-2-Azido-6-({[4-(di-tert-butylfluorosilyl)phenyl]thio}methyl)tetrahydro-2H-pyran-3,4,5-triol (5)

A solution of 4 (50 mg, 0.18 mmol, 1.2 equiv) in anhyd DMSO (1 mL) was treated with tBuOK (20 mg, 0.18 mmol, 1.2 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 3 (54 mg, 0.15 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 24 h. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved to Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with pentane/Et2O (15:1) and ending with Et2O/MeOH (20:1); yield: 51.1 mg (74%); colorless powder.

IR (ATR): 3354 (br), 2933, 2859, 2117, 1582, 1471, 1386, 1365, 1245, 1064, 1011, 969, 936, 836, 824, 811, 740, 715, 646, 599 cm–1.

1H NMR (600 MHz, CDCl3): δ = 7.52 (d, J = 8.1 Hz, 2 H, ArH), 7.39 (d, J = 8.1 Hz, 2 H, ArH), 4.59 (d, J = 8.4 Hz, 1 H, β-H1), 3.69–3.66 (m, 1 H), 3.59–3.48 (m, 4 H), 3.34 (t, J = 8.5 Hz, 1 H), 3.31 (dd, J 1 = 14.1 Hz, J 2 = 7 Hz, 1 H), 1. 05 [s, 18 H, 2 × C(CH3)3].

13C NMR (150 MHz, CDCl3): δ = 138.4 (s, Ar), 134.5 (d, J = 4.1 Hz, Ar), 130.8 (s, J = 13.8 Hz, Ar), 127.2 (d, Ar), 90.0 (d, CHN3), 76.9, 76.4, 73.5, 72.5 (4 d, CH), 34.5 (t, CH2S), 27.3 [q, C(CH3)3], 20.3 [s, J = 12.4 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –188.9 (d, J = 297.8 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.3 (d, J = 297.8 Hz).

HRMS (ESI): m/z calcd for C20H33FN3O4SSi [M + H]+: 458.19396; found: 458.19396.


#

[(2R,3S,4S,5R,6R)-3,4,5-Trihydroxy-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-2-yl]methyl 4-Methylbenzolsulfonate (7)

A solution of (2R,3S,4S,5R,6R)-2-(hydroxymethyl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3,4,5-triol (847 mg, 3.88 mmol, 1.0 equiv) in anhyd pyridine (7 mL) was cooled to 0 °C and treated with pTsCl (962 mg, 5.05 mmol, 1.3 equiv) in anhyd pyridine (3 mL). The mixture was stirred at rt for 24 h. The solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel, EtOAc); yield: 1.22 g (84%); colorless solid.

IR (ATR): 3325, 2899, 1596, 1446, 1356, 1188, 1176, 1080, 1046, 997, 925, 833, 814, 687, 656, 620, 550, 502 cm–1.

1H NMR (600 MHz, CD3OD): δ = 7.81 (d, J = 8.3 Hz, 2 H, ArH), 7.45 (d, J = 8.1 Hz, 2 H, ArH), 4.37 (d, J = 7.8 Hz, 1 H, β-H1), 4.34 (dd, J 1 = 10.9 Hz, J 2 = 1.8 Hz, 1 H), 4.29–4.26 (m, 1 H), 4.21 (s, 1 H), 4.19–4.15 (m, 1 H), 3.39 (ddd, J 1 = 9.8 Hz, J 2 = 5.9 Hz, J 3 = 1.9 Hz, 1 H), 3.30–3.28 (m, 1 H), 3.22–3.19 (m, 1 H), 3.11 (dd, J 1 = 9.2 Hz, J 2 = 7.9 Hz, 1 H), 2.46 (s, 3 H, ArCH 3). OH groups were not detected.

13C NMR (150 MHz, CD3OD): δ = 146.7, 134.6 (2 s, Ar), 131.2, 129.3 (2 d, Ar), 102.1 (d, CHOCH2), 80.0 (s, C≡C), 77.9 (d, CH), 76.5 (s, C≡C), 75.2, 74.8, 71.2 (2 d, CH), 70.8 (t, CH2OTs), 56.7 (t, CH2C≡C), 21.8 (ArCH3).

HRMS (ESI): m/z calcd for C16H20O8SNa [M + Na]+: 395.07711; found: 395.07671.


#

(2S,3S,4S,5R,6R)-2-({[4-(Di-tert-butylfluorosilyl)phenyl]thio}methyl)-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3,4,5-triol (8)

A solution of 4 (50 mg, 0.18 mmol, 1.2 equiv) in anhyd DMSO (1 mL) was treated with tBuOK (20 mg, 0.18 mmol, 1.2 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 7 (56 mg, 0.15 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 24 h. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with pentane/Et2O (15:1) and ending with Et2O/MeOH (20:1); yield: 36.8 mg (52%); colorless powder.

IR (ATR): 3347, 3293, 2934, 2859, 1582, 1470, 1387, 1365, 1262, 1180, 1066, 1007, 824, 811, 740, 716, 645 cm–1.

1H NMR (400 MHz, CDCl3): δ = 7.57–7.49 (m, 2 H, ArH), 7.39–7.36 (m, 2 H, ArH), 4.50 (d, J = 7.3 Hz, 1 H, β-H1), 4.36 (dd, J 1 = 15.7 Hz, J 2 = 2.4 Hz, 1 H), 4.25 (dd, J 1 = 15.9 Hz, J 2 = 2.2 Hz, 1 H), 3.61–3.48 (m, 4 H), 3.46–3.41 (m, 1 H), 3.17 (dd, J 1 = 14.2 Hz, J 2 = 7.3 Hz, 1 H), 2.48 (t, J = 2.4 Hz, 1 H), 1.60 (br s, 3 H, CHOH), 1. 05 [s, 18 H, 2 × C(CH3)3].

13C NMR (100 MHz, CDCl3): δ = 138.8 (s, Ar), 134.4 (d, Ar), 130.4 (s, Ar), 127.1 (d, Ar), 100.1 (d, CHOCH2), 77.2 (s, C≡C), 76.3 (d, CH), 75.4 (s, C≡C), 75.3, 73.6, 72.9 (3 d, CH), 55.9 (t, CH2C≡C), 34.5 (t, CH2S), 27.3 [q, C(CH3)3], 20.3 [s, J = 12.5 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –188.9 (d, J = 297.6 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.3 (d, J = 297.8 Hz).

HRMS (ESI): m/z calcd for C23H35FO5SSiNa [M + Na]+: 493.18507; found: 493.18476.


#

((2R,3S,4S,5R,6R)-6-{[(2R,3S,4R,5R,6R)-6-Azido-4,5-dihydroxy-2-[(tosyloxy)methyl]tetrahydro-2H-pyran-3-yl]oxy}-3,4,5-trihydroxytetrahydro-2H-pyran-2-yl)methyl 4-Methylbenzenesulfonate (10a)

A solution of 9a (100 mg, 0.27 mmol, 1.0 equiv) in anhyd pyridine (2.4 mL) was cooled to –20 °C and treated with ZnBr2·2 H2O (243 mg, 1.08 mmol, 4.0 equiv) and then with pTsCl (257 mg, 1.35 mmol, 5.0 equiv) in anhyd pyridine (1 mL). The mixture was stirred at –20 °C for 1 h. The reaction was carried out three times in separate flasks. The reaction mixtures were combined, the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel, EtOAc); yield: 367 mg (50%); colorless solid.

IR (ATR): 3375, 2363, 2330, 2119, 1598, 1450, 1353, 1190, 1173, 1141, 1071, 973, 928, 812, 688, 660, 551, 502 cm–1.

1H NMR (500 MHz, CD3OD): δ = 7.82–7.77 (m, 4 H, ArH), 7.44 (d, J = 7.1 Hz, 4 H, ArH), 4.97 (d, J = 3.7 Hz, 1 H, α-H1′), 4.43 (d, J = 8.7 Hz, 1 H, β-H1), 4.32–4.30 (m, 2 H), 4.19–4.16 (m, 2 H), 3.71–3.68 (m, 1 H), 3.63–3.60 (m, 1 H), 3.52 (m, 2 H), 3.36–3.33 (m, 1 H), 3.25 (t, J = 9.5 Hz, 1 H), 3.07 (t, J = 9 Hz, 1 H), 2.46 (d, J = 5.3 Hz, 6 H, ArCH 3). OH groups were not detected.

13C NMR (125 MHz, CD3OD): δ = 146.8, 146.6, 134.5, 134.4 (4 s, Ar), 131.3, 131.2, 129.4, 129.3 (4 d, Ar), 103.0 (d, CHO), 91.7 (d, CHN3), 80.7, 77.6, 75.6, 74.9, 74.0, 73.8, 72.4, 70.7 (8 d), 70.5, 70.4 (2 t, CH2OTs), 21.8 (q, ArCH3).

HRMS (ESI): m/z calcd for C26H33N3O14S2Na [M + Na]+: 698.12962; found: 698.12955.


#

(2S,3R,4S,5S,6S)-2-{[(2S,3S,4R,5R,6R)-6-Azido-2-({[4-(di-tert-butylfluorosilyl)phenyl]thio}methyl)-4,5-dihydroxytetrahydro-2H-pyran-3-yl]oxy}-6-({[4-(di-tert-butylfluorsilyl)phenyl]thio}methyl)tetrahydro-2H-pyran-3,4,5-triol (11a)

A solution of 4 (192.2 mg, 0.71 mmol, 2.4 equiv) in anhyd DMSO (3 mL) was treated with tBuOK (79.7 mg, 0.71 mmol, 2.4 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 10a (200 mg, 0.30 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 48 h. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with cyclohexane/EtOAc (3:1) and ending with EtOAc/MeOH (10:1); yield: 174 mg (67%); colorless solid.

IR (ATR): 3325, 2934, 2859, 2117, 1715, 1582, 1470, 1373, 1250, 1056, 1012, 939, 816, 740, 645, 600, 504 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.42–7.36 (m, 6 H, ArH), 7.25 (d, J = 8 Hz, 2 H, ArH), 5.84–5.83 (m, 1 H), 5.75 (d, J = 6.3 Hz, 1 H), 5.66 (d, J = 5.5 Hz, 1 H), 5.32 (d, J = 5.8 Hz, 1 H), 5.13–5.08 (m, 2 H), 4.57 (d, J = 8.7 Hz, 1 H, β-H1), 3.79 (t, J = 7.2 Hz, 1 H), 3.70–3.67 (m, 1 H), 3.56 (d, J = 12.3 Hz, 1 H), 3.49–3.41 (m, 3 H), 3.25–3.20 (m, 1 H), 3.16–3.11 (m, 1 H), 3.09–3.05 (m, 1 H), 3.03–3.00 (m, 1 H), 1.00–0.94 [m, 36 H, 4 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 140.0, 139.7 (2 s, Ar), 133.9 (d, J = 4.1 Hz, Ar), 133.8 (d, J = 3.9 Hz, Ar), 128.6 (s, J = 13.8 Hz, Ar), 128.4 (s, J = 13.8 Hz, Ar), 126.4, 125.9 (2 d, Ar), 101.4 (d, CHO), 89.6 (d, CHN3), 82.6, 75.8, 75.5, 72.8, 72.7, 72.5, 72.3, 72.1 (8 d, CH), 59.7 (t, CH2S), 39.0 (t, CH2S), 28.0 [q, J = 6.1 Hz, C(CH3)3], 27.0 [q, J = 6.6 Hz, C(CH3)3], 19.8 [s, J = 12.4 Hz, C(CH3)3], 19.7 [s, J = 12.4 Hz, C(CH3)3].

19F NMR (565 MHz, DMSO-d 6): δ = –187.5 (d, J = 297.8 Hz).

29Si NMR (119 MHz, DMSO-d 6): δ = 15.4 (d, J = 297.8 Hz).

HRMS (ESI): m/z calcd for C40H63F2N3O8S2Si2Na [M + H + Na]+: 894.34609; found: 894.34644.


#

((2R,3S,4S,5R,6R)-6-{[(2R,3S,4R,5R,6R)-4,5-Dihydroxy-6-(prop-2-yn-1-yloxy)-2-[(tosyloxy)methyl]tetrahydro-2H-pyran-3-yl]oxy}-3,4,5-trihydroxytetrahydro-2H-pyran-2-yl)methyl 4-Methylbenzenesulfonate (10b)

A solution of 9b (100 mg, 0.26 mmol, 1.0 equiv) in anhyd pyridine (2.4 mL) was cooled to –20 °C and treated with ZnBr2·2 H2O (237 mg, 1.05 mmol, 4.0 equiv) and then with pTsCl (248 mg, 1.3 mmol, 5.0 equiv) in anhyd pyridine (1 mL). The mixture was stirred at –20 °C for 1 h. The reaction was carried out twice in separate flasks. The reaction mixtures were combined, the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel, EtOAc); yield: 115 mg (31%); colorless solid.

IR (ATR): 3284, 2924, 1731, 1598, 1354, 1173, 993, 928, 812, 691, 660, 551 cm–1.

1H NMR (400 MHz, DMSO-d 6): δ = 7.79–7.71 (m, 4 H, ArH), 7.46 (ddd, J 1 = 10.0 Hz, J 2 = 8.6 Hz, J 3 = 0.6 Hz, 4 H, ArH), 5.54 (d, J = 3.2 Hz, 1 H, OH), 5.49 (d, J = 6.4 Hz, 1 H, OH), 5.33 (d, J = 5.4 Hz, 1 H, OH), 5.23 (d, J = 5.8 Hz, 1 H, OH), 5.03 (d, J = 5.1 Hz, 1 H, OH), 4.93 (d, J = 3.7 Hz, 1 H, α-H1′), 4.29–4.23 (m, 2 H), 4.22–4.19 (m, 1 H), 4.14–4.06 (m, 4 H), 3.51–3.56 (m, 1 H), 3.48 (t, J = 2.5 Hz, 2 H), 3.37 (d, J = 3.2 Hz, 1 H), 3.26–3.30 (m, 1 H), 3.21–3.26 (m, 1 H), 3.13–3.18 (m, 1 H), 3.08 (dd, J 1 = 9.7 Hz, J 2 = 5.7 Hz, 1 H), 2.96 (dd, J 1 = 5.3 Hz, J 2 = 1.1 Hz, 1 H), 2.41 (s, 6 H, ArCH 3).

13C NMR (125 MHz, DMSO-d 6): δ = 145.0, 144.9, 132.4, 132.3 (4 s, Ar), 130.1, 127.7, 127.5 (3 d, Ar), 100.7 (d), 100.4 (d), 79.5 (d), 78.9 (d), 77.6 (s), 75.8, 72.8, 72.4 (3 d), 71.9 (t, CH2OTs), 71.5 (d), 70.4 (t, CH2OTs), 69.3, 68.8 (2 d), 55.1 (t, CH2C≡CH), 21.2 (q, ArCH3).

HRMS (ESI): m/z calcd for C29H37O15S2 [M + H]+: 689.15684; found: 689.15570.


#

(2S,3S,4S,5R,6S)-2-({[4-(Di-tert-butylfluorsilyl)phenyl]thio}methyl)-6-{[(2S,3S,4R,5R,6R)-2-({[4-(di-tert-butylfluorsilyl)phenyl]thio}methyl)-4,5-dihydroxy-6-(prop-2-yn-1-yloxy)tetra­hydro-2H-pyran-3-yl]oxy)}tetrahydro-2H-pyran-3,4,5-triol (11b)

A solution of 4 (144.1 mg, 0.53 mmol, 2.4 equiv) in anhyd DMSO (3 mL) was treated with tBuOK (59.8 mg, 0.53 mmol, 2.4 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 10b (152.9 mg, 0.22 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 2 d. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with cyclohexane/EtOAc (3:1) and ending with EtOAc­/MeOH (10:1); yield: 109 mg (55%); colorless solid.

IR (ATR): 3298, 2933, 2859, 1732, 1582, 1471, 1365, 1245, 1062, 1012, 824, 812, 741, 646, 601, 504, 430 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.44–7.39 (m, 4 H, ArH), 7.36 (d, J = 8.1 Hz, 2 H, ArH), 7.26 (d, J = 8.1 Hz, 2 H, ArH), 5.72 (d, J = 2.6 Hz, 1 H, OH), 5.64 (d, J = 6.6 Hz, 1 H, OH), 5.34–5.29 (m, 2 H, 2 × OH), 5.13 (d, J = 3.7 Hz, 1 H, α-H1′), 5.06 (d, J = 5.1 Hz, 1 H, OH), 4.93 (td, J 1 = 6.5 Hz, J 2 = 3.9 Hz, 1 H), 4.29 (d, J = 7.7 Hz, 1 H, β-H-1), 4.11 (d, J = 2.6 Hz, 1 H), 3.99 (d, J = 13.6 Hz, 1 H, H-7b), 3.80–3.77 (m, 1 H, H-3), 3.53–3.44 (m, 2 H), 3.43–3.34 (m, 7 H), 3.23–3.18 (m, 1 H), 3.14–3.08 (m, 1 H), 3.08–2.98 (m, 2 H), 0.97 [d, J = 8.1 Hz, 36 H, 4 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 140.0, 139.8 (2 s, Ar), 133.9 (d, J = 4.1 Hz, Ar), 133.8 (d, J = 4.1 Hz, Ar), 128.5 (s, J = 13.9 Hz, Ar), 128.3 (s, J = 13.9 Hz, Ar), 126.4 (d, Ar), 125.8 (d, Ar), 101.2 (d), 100.5 (d), 82.9 (d), 79.3 (s), 77.5 (s), 76.0, 74.2 (2 d), 72.8 (d, J = 7.1 Hz), 72.6, 72.3 (2 d), 72.01 (d, J = 3.4 Hz), 68.8 (d), 58.3 (d), 54.7 (t), 31.4, 28.0 (2 t), 27.0 [q, C(CH3)3], 19.8, 19.7 [2 s, J = 4.7 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –187.5, –187.5 (2 d, J = 297.8 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.5, 13.0 (2 d, J = 298.1 Hz).

HRMS (ESI): m/z calcd for C44H67F2O11S2Si2 [M + HCOO]: 929.36259; found: 929.36097.


#

((2R,3R,4S,5R,6S)-6-{[(2R,3S,4R,5R,6R)-6-Azido-4,5-dihydroxy-2-[(tosyloxy)methyl]tetrahydro-2H-pyran-3-yl]oxy}-3,4,5-trihydroxytetrahydro-2H-pyran-2-yl)methyl 4-Methylbenzolsulfonate (13a)

A solution of 12a (100 mg, 0.27 mmol, 1.0 equiv) in anhyd pyridine (2.4 mL) was cooled to –20 °C and treated with ZnBr2·2 H2O (243 mg, 1.08 mmol, 4.0 equiv) and then with pTsCl (257 mg, 1.35 mmol, 5.0 equiv) in anhyd pyridine (1 mL). The mixture was stirred at –20 °C for 15 min. The reaction was carried out twice in separate flasks. The reaction mixtures were combined, the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with EtOAc/cyclohexane (30:1) and ending with EtOAc/MeOH (10:1); yield: 160 mg (44%); colorless solid.

IR (ATR): 3369, 2912, 2116, 1728, 1598, 1451, 1352, 1255, 1173, 1060, 971, 811, 769, 689, 662, 550 cm–1.

1H NMR (500 MHz, DMSO-d 6): δ = 7.83–7.76 (m, 4 H, ArH), 7.49–7.45 (m, 4 H, ArH), 5.82 (d, J = 5.6 Hz, 1 H), 5.16 (d, J = 3.8 Hz, 1 H), 4.96 (d, J = 4.7 Hz, 1 H), 4.82 (d, J = 4.7 Hz, 1 H), 4.59–4.55 (m, 2 H), 4.46 (d, J = 9.9 Hz, 1 H), 4.20–4.10 (m, 3 H), 3.91 (t, J = 9.2 Hz, 1 H), 3.76–3.72 (m, 2 H), 3.30–3.23 (m, 3 H), 3.04–3.01 (m, 1 H), 2.42 (d, J = 1.5 Hz, 6 H, 2 × ArCH 3). OH groups were not detected.

13C NMR (125 MHz, DMSO-d 6): δ = 145.2, 144.9, 132.3, 131.8 (4 s, Ar), 130.3, 130.1, 127.9, 127.7 (4 d, Ar), 102.8 (d, CHO), 89.2 (d, CHN3), 78.5, 74.0, 73.3, 72.6, 72.4, 72.2 (6 d, CH), 69.9 (t, CH2OTs) 69.8 (d, CH), 69.2 (t, CH2OTs), 68.0 (d, CH), 21.2 (q, ArCH3).

HRMS (ESI): m/z calcd for C26H33N3O14S2Na [M + Na]+: 698.12962; found: 698.12936.


#

(2R,3R,4S,5R,6S)-2-{[(2S,3S,4R,5R,6R)-6-Azido-2-({[4-(di-tert-butylfluorosilyl)phenyl]thio}methyl)-4,5-dihydroxytetrahydro-2H-pyran-3-yl]oxy}-6-({[4-(di-tert-butylfluorsilyl)phenyl]thio}methyl)tetrahydro-2H-pyran-3,4,5-triol (14a)

A solution of 4 (136 mg, 0.5 mmol, 2.4 equiv) in anhyd DMSO (3 mL) was treated with tBuOK (57 mg, 0.5 mmol, 2.4 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 13a (142 mg, 0.21 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 48 h. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with cyclohexane/EtOAc (3:1) and ending with EtOAc; yield: 61 mg (33%); colorless solid.

IR (ATR): 3371, 2935, 2860, 2117, 1582, 1470, 1366, 1249, 1054, 936, 816, 741, 646, 600, 505 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.49–7.44 (m, 4 H, ArH), 7.39–7.33 (m, 4 H, ArH), 5.75 (d, J = 5.6 Hz, 1 H), 5.33 (d, J = 5 Hz, 1 H), 4.93 (d, J = 5.6 Hz, 1 H), 4.88 (d, J = 5 Hz, 1 H), 4.70 (d, J = 1.9 Hz, 1 H), 4.59 (d, J = 8.7 Hz, 1 H), 4.36 (d, J = 7.8 Hz, 1 H), 4.03 (q, J = 7.1 Hz, 1 H), 3.80–3.71 (m, 3 H), 3.65 (t, J = 6.7 Hz, 1 H), 3.45–3.41 (m, 3 H), 3.23–3.11 (m, 3 H), 1.01–1.00 [m, 36 H, 4 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 139.5, 139.0 (2 s, Ar), 134.1 (d, J = 4.1 Hz, Ar), 134.0 (d, J = 3.9 Hz, Ar), 128.8 (s, J = 13.8 Hz, Ar), 128.3 (s, J = 13.8 Hz, Ar), 126.2, 125.9 (2 d, Ar), 103.2 (d, CHO), 89.4 (d, CHN3), 81.4, 75.4, 74.0, 73.3 (4 d, CH), 73.1 (d, J = 7.4 Hz, CH), 70.1, 69.2 (2 d, CH), 32.4 (t, CH2S), 32.2 (t, CH2S), 28.0 [q, J = 6.1 Hz, C(CH3)3], 27.0 [q, C(CH3)3], 19.8 [s, C(CH3)3], 19.7 [s, C(CH3)3].

19F NMR (565 MHz, DMSO-d 6): δ = –187.4 (d, J = 297.5 Hz).

29SiNMR (119 MHz, DMSO-d 6): δ = 15.6 (d, J = 297.5 Hz).

HRMS (ESI): m/z calcd for C40H64F2N3O8S2Si2 [M + H]+: 872.36359; found: 872.36441.


#

((2R,3R,4S,5R,6S)-6-{[(2R,3S,4R,5R,6R)-4,5-Dihydroxy-6-(prop-2-yn-1-yloxy)-2-[(tosyloxy)methyl]-tetrahydro-2H-pyran-3-yl]oxy}-3,4,5-trihydroxytetrahydro-2H-pyran-2-yl)methyl 4-Methylbenzolsulfonate (13b)

A solution of 12b (100 mg, 0.26 mmol, 1.0 equiv) in anhyd pyridine (2.3 mL) was cooled to –20 °C and treated with ZnBr2·2 H2O (237 mg, 1.05 mmol, 4.0 equiv) and then with pTsCl (251 mg, 1.3 mmol, 5.0 equiv) in anhyd pyridine (1 mL). The mixture was stirred at –20 °C for 90 min. The reaction was carried out twice in separate flasks. The reaction mixtures were combined, the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel, EtOAc); yield: 130 mg (36%); colorless solid.

IR (ATR): 3334, 2912, 1728, 1598, 1451, 1352, 1173, 1122, 1049, 1019, 971, 931, 836, 813, 769, 691, 661, 551 cm–1.

1H NMR (400 MHz, DMSO-d 6): δ = 7.84–7.77 (m, 4 H, ArH), 7.50–7.46 (m, 4 H, ArH), 5.46 (d, J = 5.4 Hz, 1 H), 5.16 (d, J = 4.1 Hz, 1 H), 4.96 (d, J = 5 Hz, 1 H), 4.82 (d, J = 4.9 Hz, 1 H), 4.54 (d, J = 2.1 Hz, 1 H), 4.47 (d, J = 9.3 Hz, 1 H), 4.31 (d, J = 7.8 Hz, 1 H), 4.23–4.07 (m, 5 H), 4.02 (t, J = 6.8 Hz, 1 H), 3.91 (dd, J 1 = 9.9 Hz, J 2 = 8.5 Hz, 1 H), 3.78–3.76 (m, 1 H), 3.59–3.51 (m, 3 H), 3.27–3.24 (m, 3 H), 3.04–2.99 (m, 1 H), 2.43 (s, 6 H, 2 × ArCH 3).

13C NMR (125 MHz, DMSO-d 6): δ = 145.1, 144.8, 132.5, 131.8 (4 s, Ar), 130.3, 130.1, 127.9, 127.7 (4 d, Ar), 102.7 (d, CHO), 100.3 (d, CHOCH2), 79.6 (s, C≡CH), 77.6 (d, C≡CH), 74.0, 72.6, 72.5, 72.2, 71.4, 69.8, 69.4, 68.0 (8 d), 62.3 (t, CH2OTs), 55.0 (t, CHOCH2), 21.2 (q, ArCH3).

HRMS (ESI): m/z calcd for C29H37O15S2 [M + H]+: 689.15684; found: 689.15712.


#

(2S,3R,4S,5R,6R)-2-({[4-(Di-tert-butylfluorsilyl)phenyl]thio}methyl)-6-{[(2S,3S,4R,5R,6R)-2-({[4-(di-tert-butylfluorsilyl)phenyl]-thio}methyl)-4,5-dihydroxy-6-(prop-2-yn-1-yloxy)tetrahydro-2H-pyran-3-yl]oxy}tetrahydro-2H-pyran-3,4,5-triol (14b)

A solution of 4 (94 mg, 0.35 mmol, 2.4 equiv) in anhyd DMSO (1.5 mL) was treated with tBuOK (39 mg, 0.35 mmol, 2.4 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 13b (100 mg, 0.15 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 2 d. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with cyclohexane/EtOAc (3:1) and ending with EtOAc/MeOH (10:1); yield: 47 mg (36%); colorless solid.

IR (ATR): 3396, 2934, 2859, 1715, 1582, 1471, 1365, 1074, 825, 812, 741, 646, 601, 505, 430 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.46 (dd, J 1 = 19.8 Hz, J 2 = 8.1 Hz, 4 H ArH), 7.38 (d, J = 8.2 Hz, 2 H, ArH), 7.34 (d, J = 8.2 Hz, 2 H, ArH), 5.38 (d, J = 5.3 Hz, 1 H, OH), 5.30 (d, J = 4.8 Hz, 1 H, OH), 4.91 (d, J = 5.4 Hz, 1 H, OH), 4.86 (d, J = 4.9 Hz, 1 H, OH), 4.64 (d, J = 1.8 Hz, 1 H, OH), 4.37–4.32 (m, 2 H), 4.19 (dd, J 1 = 15.6 Hz, J 2 = 2.4 Hz, 1 H), 4.11–4.04 (m, 2 H), 3.77–3.70 (m, 2 H), 3.67–3.64 (m, 1 H), 3.59–3.54 (m, 1 H), 3.43–3.37 (m, 4 H), 3.26–3.21 (m, 1 H), 3.16–3.08 (m, 3 H), 1.00 [d, J = 5.0 Hz, 36 H, 4 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 140.2, 139.6 (2 s, Ar), 134.6 (d, J = 4.4 Hz, Ar), 134.4 (d, J = 4.4 Hz, Ar), 129.2 (s, J = 14.3 Hz, Ar), 128.7 (s, J = 14.3 Hz, Ar), 126.7, 126.4 (2 d, Ar), 103.6 (d), 100.9 (d), 82.2 (d), 79.9 (s), 77.9, 74.6, 74.4, 73.7 (4 d), 73.5 (d, J = 2.2 Hz), 70.5 (d), 69.7 (d), 67.7 (d, J = 12.1 Hz), 55.3 (t), 33.0, 32.8 (2 t), 27.5 [q, C(CH3)3], 20.2 [s, J = 12.1 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –187.4, –187.4 (2 d, J = 297.8 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.5, 13.6 (2 d, J = 297.6 Hz).

HRMS (ESI): m/z calcd for C43H66F2O9S2Si2 [M + Na]+: 907.35471; found: 907.35541.


#

((2R,3S,4R,5R,6R)-6-Azido-3-{[(4aR,6S,7R,8R)-7,8-dihydroxy-2-phenylhexahydropyrano[3,2-d][1,3]dioxin-6-yl]oxy}-4,5-dihydroxytetrahydro-2H-pyran-2-yl)methyl 4-Methylbenzensulfonate (16) and (4aR,6S,7R,8R)-6-{[(2R,3S,4R,5R,6R)-6-Azido-4,5-dihydroxy-2-[(tosyloxy)methyl]tetrahydro-2H-pyran-3-yl]oxy}-7-hydroxy-2-phenylhexahydropyran[3,2-d][1,3]dioxin-8-yl 4-Methylbenzenesulfonate (17)

A solution of 15 (100 mg, 0.22 mmol, 1.0 equiv) in anhyd pyridine (2 mL) was cooled to –20 °C and treated with ZnBr2·2 H2O (198 mg, 0.88 mmol, 4.0 equiv) and then with pTsCl (209 mg, 1.1 mmol, 5.0 equiv) in anhyd pyridine (1 mL). The mixture was stirred at –20 °C for 30 min. The solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with EtOAc/cyclohexane (1:1, + 1% Et3N) and ending with EtOAc/MeOH (30:1, + 1% Et3N).


#

16

Yield: 66 mg (49%); colorless solid.

IR (ATR): 3334, 2911, 2113, 1598, 1359, 1248, 1174, 1095, 1033, 994, 964, 903, 839, 810, 774, 741, 698, 670, 597, 554, 520, 481 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.76 (d, J = 8.1 Hz, 2 H, ArH), 7.44 (dd, J 1 = 6.1 Hz, J 2 = 2.4 Hz, 2 H, ArH), 7.41–7.35 (m, 5 H, ArH), 5.74 (d, J = 5.6 Hz, 1 H, OH), 5.56 (s, 1 H), 5.19 (d, J = 4.1 Hz, 1 H, OH), 5.06–4.99 (m, 2 H, OH), 4.63–4.56 (m, 2 H), 4.33 (d, J = 7.4 Hz, 1 H), 4.13 (dd, J 1 = 11.0 Hz, J 2 = 7.2 Hz, 1 H), 4.09–4.05 (m, 2 H), 3.96 (d, J = 12.2 Hz, 1 H), 3.79 (t, J = 8.3 Hz, 1 H), 3.58 (s, 1 H), 3.48–3.39 (m, 3 H), 3.36 (d, J = 9.5 Hz, 1 H), 3.03 (td, J 1 = 8.6 Hz, J 2 = 5.8 Hz, 1 H), 2.38 (s, 3 H, ArCH 3).

13C NMR (150 MHz, DMSO-d 6): δ = 145.3 (s, Ar), 139.0 (s, Ar), 132.7 (s, Ar), 130.5, 129.2 (2 d, Ar), 128.4 (d, Ar), 128.1, 126.7 (2 d, Ar), 102.8 (d), 100.2 (d), 89.7 (d), 77.5, 76.1, 74.6 73.9, 73.3, 72.0, 70.0 (7 d), 69.8, 68.9 (2 t), 66.8 (d), 21.6 ArCH3).

HRMS (ESI): m/z calcd for C26H32N3O12S [M + H]+: 610.17012; found: 610.17125.


#

17

Yield: 52 mg (31%); colorless solid.

IR (ATR): 3486, 3037, 2875, 2116, 1729, 1598, 1357, 1246, 1173, 1093, 1043, 963, 905, 868, 812, 697, 669, 552 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.82 (d, J = 8.2 Hz, 2 H, ArH), 7.74 (d, J = 8.2 Hz, 2 H, ArH), 7.42 (d, J = 8.2 Hz, 2 H, ArH), 7.39–7.35 (m, 5 H, ArH), 7.29–7.26 (m, 2 H, ArH), 5.76 (d, J = 5.5 Hz, 1 H, OH), 5.61 (d, J = 5.5 Hz, 1 H, OH), 5.35 (s, 1 H), 5.04 (d, J = 3.1 Hz, 1 H, OH), 4.62–4.51 (m, 4 H), 4.48 (d, J = 7.6 Hz, 1 H), 4.25 (d, J = 3.4 Hz, 1 H), 4.03–4.09 (m, 2 H), 3.99–3.95 (m, 1 H), 3.78–3.73 (m, 1 H), 3.70 (s, 1 H), 3.54 (ddd, J 1 = 9.5 Hz, J 2 = 7.9 Hz, J 3 = 5.5 Hz, 1 H), 3.43–3.36 (m, 2 H,), 3.01 (td, J 1 = 8.5 Hz, J 2 = 5.8 Hz, 1 H), 2.38 (d, J = 3.7 Hz, 6 H, 2 × ArCH 3).

13C NMR (150 MHz, DMSO-d 6): δ = 145.1 (s, Ar), 144.9 (s, Ar), 138.1 (s, Ar), 134.0 (s, Ar), 132.3 (s, Ar), 130.2, 130.0, 129.1, 128.2 (4 d, Ar), 127.8 (d, J = 13.6 Hz, Ar), 126.2 (d, Ar), 102.8 (d), 100.2 (d), 89.7 (d), 77.5, 76.1, 74.6 73.9, 73.3, 72.0, 70.0 (7 d), 69.8, 68.9 (t), 66.8 (d), 21.6 (q, ArCH3).

LRMS (ESI): m/z calcd for C26H31N3O12SNa [M + Na]+: 786.16; found: 786.32.


#

X-ray Crystal Data[11]

Intensity data for the colorless crystal of compound 17 were collected on a D8 Venture Bruker Diffractometer, SC-XRD using Cu-Kα radiation at 173(2) K. The molecular structure was solved with direct methods using SHELXS-2014/7 or SHELXT-2014/7 and refinements were carried out against F2 by using SHELXL-2014/7[27] or OLEX2.[28] The data obtained by the measurement were treated in the refinement procedure as a 2-component twin. Applying the TwinRotMat option in the program PLATON[29] revealed a twin law (BASF 0. 0.13258).


#

(4aR,6S,7R,8R)-6-{[(2S,3S,4R,5R,6R)-6-Azido-2-({[4-(di-tert-butylfluorsilyl)phenyl]thio}methyl)-4,5-dihydroxytetrahydro-2H-pyran-3-yl]oxy}-2-phenylhexahydropyrano[3,2-d][1,3]dioxin-7,8-diol (18)

A solution of 4 (110 mg, 0.41 mmol, 1.2 equiv) in anhyd DMSO (3 mL) was treated with tBuOK (45.8 mg, 0.41 mmol, 1.2 equiv). The mixture was stirred at 50 °C for 30 min. After the addition of 16 (207 mg, 0.34 mmol, 1 equiv) in anhyd DMSO (1 mL), the mixture was stirred at 50 °C for 2 d. Cooling to rt was followed by addition of excess aq 1 M HCl. The mixture was dissolved in Et2O and washed with aq 1 M HCl (3 × 20 mL) and H2O (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with cyclohexane/EtOAc (2:1) and ending with EtOAc; yield: 146 mg (61%); colorless solid.

IR (ATR): 3385, 2934, 2933, 2859, 2115, 1733, 1582, 1471, 1365, 1245, 1163, 1027, 901, 812, 740, 699, 647, 601, 505, 431 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.47 (d, J = 7.7 Hz, 4 H, ArH), 7.42–7.35 (m, 5 H, ArH), 5.70 (d, J = 5.5 Hz, 1 H, OH), 5.58 (s, 1 H), 5.47 (d, J = 4.4 Hz, 1 H, OH), 5.13–5.07 (m, 1 H, OH), 4.83–4.77 (m, 1 H, OH), 4.64 (d, J = 8.4 Hz, 1 H), 4.50–4.46 (m, 1 H), 4.11 (d, J = 2.6 Hz, 2 H), 4.00 (d, J = 12.1 Hz, 1 H), 3.85–3.81 (m, 1 H), 3.75 (br s, 1 H), 3.65 (s, 1 H), 3.54–3.47 (m, 2 H), 3.45–3.43 (m, 2 H), 3.18–3.08 (m, 2 H), 1.01 [s, 18 H, 2 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 139.8, 138.9, 135.3 (3 s, Ar), 134.4 (d, J = 4.4 Hz, Ar), 129.1, 128.3, 126.6, 126.2 (4 d, Ar), 103.7 (d, C-1′), 100.1 (d), 89.9 (d), 82.3, 76.1, 75.8, 74.5, 73.7, 72.2, 70.3 (7 d), 68.8 (t), 66.8 (d), 32.7 (t), 28.4, 27.4 [2 q, C(CH3)3)], 20.2 [d, J = 12.1 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –187.4 (d, J = 296.5 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.6 (d, J = 297.1 Hz).

HRMS (ESI): m/z calcd for C34H47FN3O11SSi [M + HCOO]: 752.26791; found: 752.26732.


#

(2S,3R,4S,5R,6R)-2-{[(2S,3S,4R,5R,6R)-6-Azido-2-({[4-(di-tert-butylfluorsilyl)phenyl]thio}methyl)-4,5-dihydroxytetrahydro-2H-pyran-3-yl]oxy}-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (19)

A mixture of 18 (124 mg, 0.18 mmol, 1.0 equiv) and 80% aq AcOH (4 mL) was stirred at 70 °C for 4 h. After cooling to rt, the mixture was extracted with toluene (3 × 20 mL). After drying (MgSO4), the solvent was removed under reduced pressure, and the crude product was purified by column chromatography (silica gel) using a gradient starting with EtOAc and ending with EtOAc/MeOH (10:1); yield: 71 mg (64%); colorless solid.

IR (ATR): 3359, 2933, 2859, 2121, 1583, 1366, 1245, 1172, 1068, 1034, 878, 814, 778, 741, 700, 645, 599, 503, 437 cm–1.

1H NMR (600 MHz, DMSO-d 6): δ = 7.53–7.30 (m, 4 H, Ar), 5.69 (d, J = 5.5 Hz, 1 H, OH), 5.33–5.25 (m, 1 H, OH), 4.88–4.82 (m, 2 H), 4.67 (t, J = 5.0 Hz, 1 H, OH), 4.62 (d, J = 8.4 Hz, 1 H), 4.55 (d, J = 4.8 Hz, 1 H), 4.44 (br. s., 1 H, OH), 4.28 (d, J = 7.7 Hz, 1 H), 3.82–3.77 (m, 1 H), 3.73–3.68 (m, 1 H), 3.63 (br s, 1 H), 3.57–3.45 (m, 3 H), 3.40–3.34 (m, 4H), 3.15–3.06 (m, 2 H), 1.02–0.95 [m, 18 H, 2 × C(CH3)3].

13C NMR (150 MHz, DMSO-d 6): δ = 139.5 (s, Ar), 134.1 (d, J = 4.4 Hz, Ar), 128.3 (s, J = 13.2 Hz, Ar), 126.0 (d, Ar), 104.3 (d), 89.5 (d), 83.1, 75.8, 75.4, 74.6, 73.5, 73.1, 70.6, 68.3 (8 d), 60.5 (t), 32.4 (t), 28.1, 27.2 [2 q, C(CH3)3], 19.9 [s, J = 13.2 Hz, C(CH3)3].

19F NMR (565 MHz, CDCl3): δ = –187.4 (d, J = 297.2 Hz).

29Si NMR (119 MHz, CDCl3): δ = 15.6 (d, J = 297.3 Hz).

HRMS (ESI): m/z calcd for C26H42FN3O9SSiNa [M + Na]+: 642.22873; found: 642.22877.


#
#

Acknowledgment

We thank Matthias Mawick for synthesizing compound 4.

Supporting Information



Zoom Image
Zoom Image
Equation 1 Isotope exchange in silicon-based fluoride acceptors (SiFA)
Zoom Image
Scheme 1 Synthesis of β-d-azido-substituted GlucoSiFA derivative 5
Zoom Image
Scheme 2 Synthesis of β-d-alkynyl-substituted GlucoSiFA derivative 8
Zoom Image
Scheme 3 Synthesis of two-fold SiFA-substituted maltose and lactose derivatives 11 and 14
Zoom Image
Scheme 4 Synthesis of β-d-azido-substituted LactoSiFA derivative 19
Zoom Image
Figure 1 X-ray crystal structure of bistosylate 17