Download PDF
Int J Sports Med 1983; 04(2): 129-131
DOI: 10.1055/s-2008-1026026
© Georg Thieme Verlag Stuttgart · New York

Release and Retention in Alpine Ski Bindings

U. Lindsjö*, H. Ekström**, J. Gustavsson
  • *Department of Orthopaedic Surgery, University Hospital, Uppsala, Sweden
  • **Department of Mechanical Engineering, Institute of Technology, University of Linköping, Sweden
Further Information

Publication History

Publication Date:
14 March 2008 (online)

Also available at
    Permissions and Reprints

Abstract

Six different designs of alpine ski bindings were semistatically tested in a MTS machine, and measurements of release forces were performed at the toe and at the heel, perpendlcularly, and at 30° backward and 30° forward from the normal of the ski, respectively. In the conventional, two-part bindings examined, there was no difference between the forces acting in perpendicular and oblique planes. The release resistance in oblique directions was lower than the retention force perpendicularly to the ski in two binding designs with a spring-loaded, moveable toe unit (Besser, “Jack” prototype). A low release resistance obliquely forward is important for the prevention of injury to the lower extremity when a skier falls forward. On analysis of the injury-preventing properties of a release binding, consideration should also be paid to release resistance in oblique planes.

Key words

alpine ski bindings - binding function - standards of alpine bindings