RSS-Feed abonnieren
Bitte kopieren Sie die angezeigte URL und fügen sie dann in Ihren RSS-Reader ein.
https://www.thieme-connect.de/rss/thieme/de/10.1055-s-00000083.xml
Synlett 2015; 26(03): 388-392
DOI: 10.1055/s-0034-1379601
DOI: 10.1055/s-0034-1379601
letter
Stereoselective Allyl Enol Carbonates for the Synthesis of Chiral Aldehydes Bearing All Carbon Quaternary Stereocenters via the Decarboxylative Asymmetric Allylic Alkylation (DAAA)
Weitere Informationen
Publikationsverlauf
Received: 08. August 2014
Accepted after revision: 23. Oktober 2014
Publikationsdatum:
07. Januar 2015 (online)
![](https://www.thieme-connect.de/media/synlett/201503/lookinside/thumbnails/10.1055-s-0034-1379601-1.jpg)
Abstract
A stereoselective synthesis of carbonates derived from 3-hydroxy-2-aryl acrylates was devised that can form the Z- or E-stereoisomer in very high Z/E ratios (50:1 and 1:99, respectively). The stereochemical outcome depends on the choice of base, addition of TMEDA and reaction temperature. The Z- and E-stereoisomers have different reactivities towards the DAAA reaction, with the E-stereoisomer displaying both greater reactivity and enantiodifferentiation with chiral ligands. The DAAA of E-stereoisomer analogues takes place in excellent yields ranging from 96–99% and enantioselectivities ranging from 42–78% ee.
Supporting Information
- Supporting information for this article is available online at http://dx.doi.org/10.1055/s-0034-1379601.
- Supporting Information
-
References and Notes
- 1a Trost BM, Jiang C. Synthesis 2006; 369
- 1b Bella M, Gasperi T. Synthesis 2009; 1583
- 1c Das JP, Marek I. Chem. Commun. 2011; 47: 4593
- 1d Douglas J, Overman LE. PNAS 2004; 101: 5363
- 1e Christoffers J, Baro A. Adv. Synth. Catal. 2005; 347: 1473
- 1f Quaternary Stereocenters: Challenges and Solutions for Organic Synthesis. Christoffers J, Baro A. Wiley; Weinheim: 2005
- 2a Steven A, Overman LE. Angew. Chem. Int. Ed. 2007; 46: 5488
- 2b Veitch GE, Beckmann E, Burke BJ, Boyer A, Ayats C, Ley SV. Angew. Chem. Int. Ed. 2007; 46: 7633
- 2c Diazonamide A, Burgett AW. G, Li Q, Wei Q, Harran PG. Angew. Chem. Int. Ed. 2003; 42: 4961
- 2d Nicolaou KC, Rao PB, Hao J, Reddy MV, Rassias G, Huang X, Chen DY.-K, Snyder SA. Angew. Chem. Int. Ed. 2003; 42: 1753
- 2e Nicolaou KC, Bella M, Chen DY.-K, Huang X, Ling T, Snyder SA. Angew. Chem. Int. Ed. 2002; 41: 3495
- 2f For a review involving the Pd-catalyzed asymmetric allylic alkylation, see: Hong AY, Stoltz BM. Eur. J. Org. Chem. 2013; 2745
-
3a Tsuji J, Minami I, Shimizu I. Tetrahedron Lett. 1983; 24: 1793
- 3b Trost BM, Xu J, Schmidt T. J. Am. Chem. Soc. 2009; 131: 18343
- 3c Behenna DC, Mohr JT, Sherden NH, Marinescu SC, Harned AM, Tani K, Seto M, Ma S, Novák Z, Krout MR, McFadden RM, Roizen JL, Enquist JA. Jr, White DE, Levine SR, Petrova KV, Iwashita A, Virgil SC, Stoltz BM. Chem. Eur. J. 2011; 17: 14199
- 3d Bennett NB, Duquette DC, Kim J, Liu W.-B, Marziale AN, Behenna DC, Virgil SC, Stoltz BM. Chem. Eur. J. 2013; 19: 4414
- 3e Behenna DC, Liu Y, Yurino T, Kim J, White DE, Virgil SC, Stoltz BM. Nat. Chem. 2012; 4: 130
- 3f Reeves CM, Eidamshaus C, Kim J, Stoltz BM. Angew. Chem. Int. Ed. 2013; 52: 6718
- 3g Shibuya GM, Enquist JA. Jr, Stoltz BM. Org. Lett. 2013; 15: 3480
- 4a Trost BM. Acc. Chem. Res. 1996; 29: 355
-
4b Trost BM, Van Vranken DL. Chem. Rev. 1996; 96: 395
- 4c Helmchen G. J. Organomet. Chem. 1999; 576: 203
- 4d Pfaltz A, Lautens M In Comprehensive Asymmetric Catalysis . Jacobsen EN, Pfaltz A, Yamamoto H. Springer; New York: 1999: 833-884
- 4e Trost BM, Lee C In Catalytic Asymmetric Synthesis . Ojima I., Wiley; New York: 2000. 2nd ed. 593-649
- 4f Trost BM. Chem. Pharm. Bull. 2002; 50: 1
- 4g Trost BM. J. Org. Chem. 2004; 69: 5813
- 4h Tunge JA, Burger EC. Eur. J. Org. Chem. 2005; 1715
- 4i Lu Z, Ma S. Angew. Chem. Int. Ed. 2008; 47: 258
- 4j Weaver JD, Recio AIII, Grenning AJ, Tunge JA. Chem. Rev. 2011; 111: 1846
- 4k Trost BM. Org. Process Res. Dev. 2012; 16: 185
- 5a Jiang G, List B. Angew. Chem. Int. Ed. 2011; 50: 9471
- 5b Asad SA, Ulicki J, Shevyrev M, Uddin N, Alberch E. Eur. J. Org. Chem. 2014; 5695
- 6a Mahmood SJ, Hossain MM. J. Org. Chem. 1998; 63: 3333
- 6b Dudley ME, Morshed MM, Brennan CL, Islam MS, Ahmad MS, Atuu M.-R, Branstetter B, Hossain MM. J. Org. Chem. 2004; 69: 7599
- 7 Islam MS, Brennan C, Wang Q, Hossain MM. J. Org. Chem. 2006; 71: 4675
- 8 Dudley ME, Morshed MM, Hossain MM. Synthesis 2006; 1711
-
9a Tsuda T, Okada M, Nishi S, Saegusa T. J. Org. Chem. 1986; 51: 421
- 9b Caine D In Comprehensive Organic Synthesis: Carbon–Carbon σ-Bond Formation . Vol. 3. Trost BM, Fleming I. Pergamon; New York: 1991
- 9c Hall PL, Gilchrist JH, Collum DB. J. Am. Chem. Soc. 1991; 113: 9571
- 9d Hall PL, Gilchrist JH, Harrison AT, Fuller DJ, Collum DB. J. Am. Chem. Soc. 1991; 113: 9575
- 10 Behenna DC, Stoltz BM. J. Am. Chem. Soc. 2004; 126: 15044
- 11 Procedure for the Synthesis of Allyl Enol Carbonate (E)-1: In a typical procedure, to a flask were added anhyd THF (7 mL) via syringe, followed by NaHMDS (1 M solution in THF; 1.73 mL, 1.73 mmol, 1 equiv) and TMEDA (0.26 mL, 1.73 mmol), both reagents being added at r.t. After the mixture was stirred for 5 min, 3-hydroxy-2-phenylacrylate (400 mg, 2.08 mmol) was dissolved in anhyd THF (2 mL) in a separate flask and was then transferred to the reaction flask containing the NaHMDS/ TMEDA mixture via syringe at r.t. The flask was rinsed with additional THF (1 mL) to aid in the quantitative transfer of the phenyl acrylate (total volume of THF in reaction flask 10 mL). The mixture was allowed to stir at r.t. for 20 min, at which point allylchloroformate (0.184 mL, 1.73 mmol) was added dropwise via syringe at r.t. The resulting solution was then allowed to stir at r.t. for 45 min. The reaction was monitored by taking a small aliquot (0.1 mL) via syringe from the reaction flask, passing it through a small silica plug (pasteur pipette was used for this purpose), concentrating the solvent under vacuum and taking a 1H NMR measurement. After this time, the reaction mixture was passed through a silica plug (4 cm diameter medium-porosity fritted funnel, 2 cm of silica). The silica plug was rinsed through with additional solvent (25 mL) to ensure quantitative elution of product. The solvent was then concentrated under reduced pressure at r.t. (carbonate may decarboxylate at higher temperatures) yielding carbonate (E)-1 as a yellow oil, the product being pure enough for synthetic purposes. 1H NMR (300 MHz, CDCl3): δ = 8.36 (s, 1 H), 7.40 (s, 5 H), 5.94 (ddt, J = 17.0, 10.1, 6.0 Hz, 1 H), 5.39 (dd, J = 17.3, 1.4 Hz, 1 H), 5.32 (d, J = 12.0 Hz, 1 H), 4.72 (dt, J = 6.1, 1.2 Hz, 2 H), 4.30 (q, J = 7.1 Hz, 2 H), 1.34 (t, J = 7.1 Hz, 3 H). 13C NMR (75 MHz, CDCl3): δ = 166.5, 151.9, 145.97, 131.3, 130.6, 130.1, 128.1, 128.1, 120.4, 118.8, 69.9, 61.3, 14.4. HRMS: m/z calcd for C15H16O5: 276.0998; [M + H]+ found: 277.1062.Procedure for the Synthesis of Allyl Enol Carbonate (Z)-1: To a dry flask was added anhyd THF (3 mL), via syringe and the flask was cooled to 0 °C. Next LiHMDS (1 M solution in toluene; 937 μL, 0.937 mmol) was added via syringe, followed by TMEDA (140 μL, 0.937 mmol). The reaction mixture was stirred for 5 min, after which 3-hydroxy-2-phenylacrylate (180 mg, 0.937 mmol) dissolved in THF (0.9 mL) was added dropwise via syringe to the reaction mixture at 0 °C. The resulting solution was stirred for 30 min, at which point allylchloroformate (100 μL, 0.937 mmol) was added dropwise via syringe. The resulting solution was allowed to stir for 1 h. After this time, the mixture was poured into a silica plug (4 cm diameter medium-porosity fritted funnel, 2 cm of silica). The silica plug was rinsed through with additional solvent (25 mL) to ensure quantitative elution of product. The solvent was then concentrated under reduced pressure at r.t. (carbonate may decarboxylate at higher temperatures) yielding carbonate (Z)-1 as a yellow oil, the product being pure enough for synthetic purposes. 1H NMR (300 MHz, CDCl3): δ = 7.52 (s, 1 H), 7.35 (s, 5 H), 5.90–6.03 (m, 1 H), 5.42 (dd, J = 17.3, 1.6 Hz, 1 H), 5.33 (dd, J = 10.5, 1.1 Hz, 1 H), 4.74 (dd, J = 5.9, 1.5 Hz, 2 H), 4.33 (q, J = 7.1 Hz, 2 H), 1.33 (t, J = 7.1 Hz, 3 H). 13C NMR (75 MHz, CDCl3): δ = 165.4, 152.0, 140.1, 133.2, 130.8, 128.6, 128.6, 128.2, 127.8, 120.4, 119.83, 69.6, 61.26, 14.2.
- 12 General Procedure for the DAAA Reaction of Allyl Enol Carbonates: To a dry flask was added Pd2(dba)3·CHCl3 (4.7 mg, 0.0045 mmol) followed by (R,R)-ANDEN-phenyl Trost ligand (8.8 mg, 0.0108 mmol). To the flask was added a mixture of anhyd and degassed hexane–toluene (6 mL, 2:1) at r.t. and the mixture was allowed to stir for 30 min. After several minutes of stirring, the mixture turned into a bright yellow color (occasionally a slight pink hue was observable) with a small amount of beige precipitate. The resulting mixture was cooled to –20 °C and was transferred via cannula to a separate flask containing (E)-2-(ethoxycarbonyl)-2-phenylvinyl allyl carbonate (50.0 mg, 0.18 mmol) dissolved in hexane–toluene (1 mL, 2:1) which was already cooled to –20 °C. The reaction mixture was allowed to stir at this temperature for 24 h, after which time the mixture was observed a cloudy yellow/green solution. The completion of reaction was monitored by TLC. After the reaction was complete, the solution was passed through a silica plug (1 cm fritted funnel, 2 cm silica, medium porosity filter) which was washed through with CH2Cl2 (25 mL). The solvent was concentrated under vacuum to yield ethyl 2-formyl-2-phenylpent-4-enoate as a yellow oil. 1H NMR (300 MHz, CDCl3): δ = 9.95 (s, 1 H), 7.23–7.44 (m, 5 H), 5.76 (m, 1 H), 5.13 (d, J = 18 Hz, 1 H), 5.07 (d, J = 9.9 Hz, 1 H), 4.28 (q, J = 7.1 Hz, 2 H), 3.14 (dd, J = 6.3, 13.8 Hz, 1 H), 2.88 (dd, J = 8.1, 13.8 Hz, 1 H), 1.25 (t, J = 7.1 Hz, 3 H). 13C NMR (75 MHz, CDCl3): δ = 196.3, 170.6, 135.0, 132.6, 129.0, 128.5, 127.8, 119.1, 65.6, 61.6, 37.5, 14.0. HRMS: m/z [M + H] calcd for C14H16O3: 233.1177; found: 233.1000.
- 13 McDougal NT, Virgil SC, Stoltz BM. Synlett 2010; 1712
For reviews and a general overview of the subject, see:
For some examples where quaternary center formation was crucial in natural product synthesis, see:
For examples involving the ketones undergoing DAAA, see:
For selected examples, see:
For general reviews discussing palladium-catalyzed asymmetric allylic alkylation, see: