RSS-Feed abonnieren
![](/products/assets/desktop/img/oa-logo.png)
DOI: 10.1055/s-0034-1380417
A Convenient Route to 2-Bromo-3-chloronorbornadiene and 2,3-Dibromonorbornadiene
Publikationsverlauf
Received: 05. März 2015
Accepted after revision: 15. April 2015
Publikationsdatum:
27. Mai 2015 (online)
![](https://www.thieme-connect.de/media/synlett/201511/lookinside/thumbnails/st-2015-b0150-l_10-1055_s-0034-1380417-1.jpg)
This paper is dedicated to Prof. K. P. C. Vollhardt on occasion of his 69th birthday. Thank you for inspirational leadership and enlightening supervision.
Abstract
Substituted norbornadienes are useful in a wide range of applications, including molecular solar-thermal (MOST) energy storage systems. An important precursor for 2,3-substituted norbornadienes is 2-bromo-3-chloronorbornadiene, where the two halogen atoms can be substituted selectively through two consecutive Suzuki cross-coupling reactions. Previous routes to 2-bromo-3-chloronorbornadiene have used 1,2-dibromoethane as a brominating agent, a substance known to be carcinogenic and the use of which is restricted in certain countries. Herein is reported a one-pot route to 2-bromo-3-chloronorbornadiene in 50% yield using p-toluenesulfonyl bromide as a bromine source. In addition, the procedure has been adapted to allow synthesis of 2,3-dibromonorbornadiene in 37% yield.
-
References and Notes
- 1 Hyman I. BE 498176, 1951
- 2a Cristol SJ, Snell RL. J. Am. Chem. Soc. 1958; 80: 1950
- 2b Dauben WG, Cargill RL. Tetrahedron 1961; 15: 197
- 2c Hammond GS, Turro NJ, Fischer A. J. Am. Chem. Soc. 1961; 83: 4674
- 2d Smith CD. Org. Synth. 1971; 51: 133
- 3a Moth-Poulsen K, Coso D, Börjesson K, Vinokurov N, Meier SK, Majumdar A, Vollhardt KP. C, Segalman RA. Energy Environ. Sci. 2012; 5: 8534
- 3b Börjesson K, Lennartson A, Moth-Poulsen K. ACS Sustainable Chem. Eng. 2013; 1: 585
- 4a Bren VA, Dubonosov AD, Minkin VI, Chernoivanov VA. Russ. Chem. Rev. 1991; 60: 451
- 4b Dubonosov AD, Bren VA, Chernoivanov VA. Russ. Chem. Rev. 2002; 71: 917
- 4c Lennartson A, Roffey A, Moth-Poulsen K. Tetrahedron Lett. 2015; 56: 1457
- 5a Dalkilic E, Guney M, Dastan A, Saracoglu N, De Lucchi O, Fabris F. Tetrahedron Lett. 2009; 50: 1989
- 5b Borsato G, Linden A, De Lucchi O, Lucchini V, Wolstenholme D, Zambon A. J. Org. Chem. 2007; 72: 4272
- 5c Tranmer GK, Tam W. J. Org. Chem. 2001; 66: 5113
- 5d Fan C.-A, Ferber B, Kagan HB, Lafon O, Lesot P. Tetrahedron Asymmetry 2008; 19: 2666
- 5e Wigglesworth TJ, Branda NR. Adv. Mater. 2004; 16: 123
- 5f Monti H, Corriol C, Bertrand M. Tetrahedron Lett. 1982; 23: 5539
- 5g Hayashi T, Ueyama K, Tokunaga N, Yoshida K. J. Am. Chem. Soc. 2003; 125: 11508
- 5h Mayo P, Tam W. Tetrahedron 2002; 58: 9513
- 6 Gray V, Lennartson A, Ratanalert P, Börjesson K, Moth-Poulsen K. Chem. Commun. 2014; 50: 5330
- 7 Yoo W.-J, Tsui GC, Tam W. Eur. J. Org. Chem. 2005; 1044
- 8 Schmerling L. US 1956-580469 2914571, 1959
- 9 Adam W, De Lucchi O, Pasquato L, Will B. Chem. Ber. 1987; 120: 531
- 10 Schmerling L. US 1956-580467 2905725, 1959
- 11 Stang PJ, Zhdankin VV. J. Am. Chem. Soc. 1991; 113: 4571
- 12 Stang PJ, Schwarz A, Blume T, Zhdankin VV. Tetrahedron Lett. 1992; 33: 6759
- 13 Kenndoff J, Polborn K, Szeimies G. J. Am. Chem. Soc. 1990; 112: 6117
- 14 Tranmer GK, Yip C, Handerson S, Jordan RW, Tam W. Can. J. Chem. 2000; 78: 527
- 15a Finnegan RA, McNees RS. Tetrahedron Lett. 1962; 755
- 15b Wittig G, Hahn E. Angew. Chem. 1960; 72: 781
- 15c Streitwieser AJr, Caldwell RA. J. Org. Chem. 1962; 27: 3360
- 15d Wittig G, Otten J. Tetrahedron Lett. 1963; 4: 601
- 16a Staehle M, Lehmann R, Kramar J, Schlosser M. Chimia 1985; 39: 229
- 16b Verkruijsse HD, Brandsma L. Recl. Trav. Chim. Pays-Bas 1986; 105: 66
- 17a Ramsey JC, Park CN, Ott MG, Gehring PJ. Toxicol. Appl. Pharmacol. 1979; 47: 411
- 17b Ott MG, Scharnweber HC, Langner RR. Br. J. Ind. Med. 1980; 37: 163
- 18 Winstein S. J. Am. Chem. Soc. 1961; 83: 1516
- 19 p-Toluenesulfonyl Bromide p-Toluenesulfonyl hydrazide (50 g, 0.27 mol) was mixed with CHCl3 (500 mL) at 0 °C. Small amounts of ice were also added to the reaction mixture throughout the reaction. Bromine (27 mL, 0.54 mol) was added in small portions allowing the orange color to disappear between each addition. If, when the last portion of bromine was added, the color was still white, a small amount of extra bromine was added until a light orange colour persisted. The phases were separated and the organic phase was washed with sat. aq NaHCO3 solution (200 mL) and 1% aq Na2S2O3 solution (100 mL). The organic phase was dried over Na2SO4, filtered, and the solvent was removed on a rotary evaporator. The product was ground to powder and dried at 5·10–2 mbar until NMR showed no traces of solvents or H2O; yield: 59.6 g (94%).
- 20a Litvinenko LM, Dadali VA, Savelova VA, Krichevtsova TI. Zh. Obshch. Khim. 1964; 34: 3730
- 20b Shcherbakova I. Science of Synthesis . Vol. 31a. Ramsden CA. Georg Thieme Verlag; Stuttgart: 2007: 775
- 21 2-Bromo-3-chloronorbornadiene (3) Potassium tert-butoxide (11.2 g, 0.10 mol) was dissolved in THF (200 mL), and the solution was cooled to –84 °C. Norbornadiene (12.2 mL, 0.12 mol) was added, followed by n-BuLi (2.5 M in hexanes, 40 mL, 0.10 mol) over 60 min. The yellow solution was stirred for 5 min at –84 °C and 60 min at –41 °C. The solution was cooled again to –84 °C, and p-toluenesulfonyl chloride (19.0 g, 0.10 mol) was added. The mixture was stirred for 30 min and n-BuLi (2.5 M in hexanes, 40 mL, 0.10 mol) was added over 60 min. The mixture was stirred for 5 min at –84 °C and 60 min at –41 °C. The solution was cooled to –84 °C, and p-toluenesulfonyl bromide (23.4 g, 0.10 mol) was added. The mixture was stirred for 15 min and was then heated to ambient temperature on a room-tempered water bath. The reaction mixture was quenched with H2O (50 mL), the phases were separated, and the aqueous phase was extracted with Et2O (3 × 20 mL). The solvents from the combined organic phases were slowly removed on a rotary evaporator (40 °C, 300 mbar). The residue was dissolved in pentane (50 ml), washed with H2O (10 × 10 mL), brine (20 mL), and dried over Na2SO4. The solvent was removed in vacuo (40 °C, 300 mbar) and the product distilled (2 × 10–2 mbar) using a short Vigreux column, collecting the main fraction at 25–27 °C. This afforded 3 as a colorless liquid; yield 10.24 g (50%). Analytical data were consistent with previous reports.14 The product was stored at –20 °C and should be used within a few weeks to avoid decomposition.
- 22 2,3-Dibromonorbornadiene (8) Potassium tert-butoxide (11.2 g, 0.10 mol) was dissolved in THF (200 mL), and the solution was cooled to –84 °C. Norbornadiene (12.2 mL, 0.12 mol) was added followed by n-BuLi (2.5 M in hexanes, 40 mL, 0.10 mol) under 60 min. The yellow solution was stirred for 5 min at –84 °C and 60 min at –41 °C. The solution was cooled again to –84 °C, and p-toluenesulfonyl bromide (11.7 g, 0.050 mol) was added. The mixture was stirred for 15 min at –84 °C and 60 min at –41 °C. The solution was cooled to –84 °C, and p-toluenesulfonyl bromide (11.7 g, 0.05 mol) was added. The mixture was stirred for 15 min and was then heated to ambient temperature on a room-tempered water bath. The reaction mixture was quenched with H2O (50 mL), the phases were separated, and the aqueous phase was extracted with Et2O (3 × 20 mL). The solvents from the combined organic phases were slowly removed on a rotary evaporator (40 °C, 300 mbar). The residue was dissolved in pentane (50 mL), washed with H2O (10 × 10 mL), brine (20 mL), and dried over Na2SO4. The solvent was removed in vacuo (40 °C, 300 mbar) and the product distilled (5 × 10–2 mbar) using a short Vigreux column, collecting the main fraction at 29–31 °C. This afforded 8 as a colorless liquid; yield 4.63 g (37%). Analytical data were consistent with previous reports.14 The product was stored at –20 °C and should be used within a few weeks to avoid decomposition.