Digitale Kieferorthopädie

K.-F. Krey; F. Orlob; S. Gorynia; R. Kühnert

doi:10.1055/s-0042-105269

Informationen aus Orthodontie & Kieferorthopädie, Table of Contents

Informationen aus Orthodontie & Kieferorthopädie 2016; 48(01): 39-54
DOI: 10.1055/s-0042-105269

Übersichtsartikel

Digitale Kieferorthopädie^[*]

Digital Orthodontics

K.-F. Krey

¹Poliklinik für Kieferorthopädie, Universitätsmedizin Greifswald

,

F. Orlob

²Poliklinik für Kieferorthopädie, Universitätsklinikum Leipzig; niedergelassen in eigener Praxis für Kieferorthopädie, Plauen

,

S. Gorynia

³Weiterbildungsassistentin für Kieferorthopädie, Poliklinik für Kieferorthopädie, Universitätsmedizin Greifswald

,

R. Kühnert

⁴Managing Director der Image Instruments GmbH (Schwerpunkt: Entwicklung 2D/3D Dental Imaging Software)

› Author Affiliations

Abstract

Full Text

References

Literatur
1 Harradine N, Suominen R, Stephens C et al. Holograms as substitutes for orthodontic study casts: a pilot clinical trial. Am J Orthod Dentofacial Orthop 1990; 98: 110-116
2 Salmi M. Medical applications of additive manufacturing in surgery and dental care [Doctoral Thesis]. Finnland: Aalto University, Department of Engineering Desing and Production; 2013
3 Kwon SY, Kim Y, Ahn HW et al. Computer-aided designing and manufacturing of lingual fixed orthodontic appliances using 2D/3D registration software and rapid prototyping. Int J Dent 2014; 2014: 164164
4 Grauer D, Proffit WR. Accuracy in tooth positioning with a fully customized lingual orthodontic appliance. Am J Orthod Dentofac Orthop 2011; 140: 433-443
5 Dewhorst R. Assessment of computer customized brackets and positioning jigs. Int J Orthod 2012; 23: 53-58
6 Buschang PH, Ross M, Shaw SG et al. Predicted and actual end-oftreatment occlusion produced with aligner therapy. Angle Orthod 2015; 85: 723-727
7 Luu NS, Nikolcheva LG, Retrouvey JM et al. Linear measurements using virtual study models. A systematic review. Angle Orthod 2012; 82: 1098-1106
8 Ghislanzoni LTH, Lineberger M, Cevidanes LHS et al. Evaluation of tip and torque on virtual study models: a validation study. Progress Orthod 2013; 14: 19
9 Wriedt S, Schmidtmann I, Niemann M et al. Digital 3D image of bimaxillary casts connected by a vestibular scan. J Orofac Orthop 2013; 74: 309-318
10 Cuperus AMR, Harms MC, Rangel FA et al. Dental models made with an intraoral scanner: A validation study. Am J Orthod Dentofac Orthop 2012; 142: 308-313
11 Kattadiyil MT, Mursic Z, Al Rumaih H et al. Intraoral scanning of hard and soft tissues for partial removable dental prosthesis fabrication. J Prosth Dent 2014; 112: 444-448
12 Grünheid T, McCarty SD, Larson BE. Clinical use of a direct chairside oral scanner: An assessment of accuracy, time, and patient acceptance. Am J Orthod Dentofac Orthop 2014; 146: 673-682
13 Kim JH, Kim KB, Kim WC et al. Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique. Kor J Orthod 2014; 44: 69-76
14 Patzelt SB, Bishti S, Stampf S et al. Accuracy of computer-aided design/computer-aided manufacturing – generated dental casts based on intraoral scanner data. J Am Dent Assoc 2014; 145: 1133-1140
15 Wiranto MG, Engelbrecht WP, Nolthenius HET et al. Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions. Am J Orthod Dentofac Orthop 2013; 143: 140-147
16 Hirschfelder U. Stellungnahme der DGKFO zur Radiologischen 3D‑Diagnostik in der Kieferorthopädie (CT/DVT). DGKFO 2008
17 Toma AM, Zhurow A, Payle E et al. Reproducibility of facial soft tissue landmarks on 3D laser-scanned facial images. Orthod Craniofac Res 2009; 12: 33-42
18 Wiechmann D, Rummel V, Thalheim A et al. Customized brackets and archwires for lingual orthodontics. Am J Orthod Dentofac Orthop 2003; 124: 593-599
19 Kühnert R. Virtuelle Behandlungsplanung in der KFO‑Therapie. COO 2013; 3–4: 52-64
20 Im J, Cha JY, Lee KJ et al. Comparison of virtual and manual tooth setups with digital and plaster models in extraction cases. Am J Orthod Dentofac Orthop 2014; 145: 434-442
21 Martorelli M, Gerbuno S, Giudice M et al. A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques. Dent Mat 2013; 20: e1-e10
22 Hurt AJ. Digital technology in the orthodontic laboratory. Am J Orthod Dentofac Orthop 2012; 141: 245-247
23 Conner BP, Manogharan GP, Martof AN et al. Making sense of 3D printing: Creating a map of additive manufacturing products and services. Add Manufact 2014; 1: 64-76
24 Groth C, Kravitz ND, Jones PE et al. Three-dimensional printing technology. J Clin Orthod 2014; 163: 475-485
25 Adolphs N, Liu W, Keeve E et al. RapidSplint: virtual splint generation for orthognathic surgery – results of a pilot series. Comput Aided Surg 2014; 19: 20-28
26 Kaduk WMH, Podmelle F, Louis PJ. Surgical navigation in reconstruction. Oral Maxillofac Surg Clin N Am 2013; 25: 313-333
27 Ahamed SF, Kanna ASA. A 3D‑printed miniscrew insertion stent. JCO 2014; 163: 650-652
28 Salmi M, Tuomi J, Sirkkanen R et al. Rapid tooling method for soft customized removable oral appliances. Open Dent J 2012; 6: 85-89
29 Mortadi NA, Eggbeer D, Lewis J et al. CAD/CAM/AM applications in the manufacture of dental appliances. Am J Orthod Dentofac Orthop 2012; 142: 727-733
30 Wolf M, Schumacher P, Jäger F et al. Novel lingual retainer created using CAD/CAM technology. J Orofac Orthop 2015; 76: 164-174
31 Yu Q, Xin G, Guo-Min W et al. A novel technique for presurgical nasoalveolar molding using computer-aided reverse engineering and rapid prototyping. J Craniofac Surg 2011; 22: 142-146
32 van Noordt G. The future of dental devices is digital. Dent Mater 2012; 28: 3-12
33 Patzelt SBM, Lamprinos C, Stampf S et al. The time efficiency of intraoral scanners. An in vitro comparative study. J Am Dent Assoc 2014; 145: 542-551
34 Liu YF, Zhang PY, Zhang QF et al. Digital design and fabrication of simulation model for measuring orthodontic force. Bio Med Mat Engin 2014; 24: 2265-2271
35 Wu K, Chen L, Zhou Y. Tooth segmentation on dental meshes using morphologic skeleton. Com & Graphics 2014; 38: 199-211
36 Plooij JM, Maal TJJ, Haers P et al. Digital three-dimensional image fusion process for planning and evaluating orthodontics and orthognathic surgery. A systematic review. In J Oral Maxillofac Surg 2011; 40: 341-352
37 Shqaidef A, Ayoub AF, Khambay BS. How accurate are rapid prototyped (RP) final orthodontic surgical wafers? A pilot study. Br J Oral Maxillofac Surg 2014; 52: 609-614
38 Soares PV, de Almeida Milito G, Pereira FA et al. Rapid prototyping and 3D‑virtual models for operative dentistry education in Brazil. J Dent Edu 2013; 77: 358-363
39 Vassura G, Vassura M, Bazzacchi A et al. A shift of the force vector from arm to brain: 3D computer technology in orthodontic treatment. Int Orthod 2010; 8: 46-63
40 Miyazaki T, Hotta Y, Kunii J et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mat 2009; 28: 44-56

Digitale Kieferorthopädie[*]

Digitale Kieferorthopädie^[*]