PDF herunterladen
Synlett 2002(12): 1995-1998
DOI: 10.1055/s-2002-35579
LETTER
© Georg Thieme Verlag Stuttgart · New York

Selective Palladium-Catalyzed Aminations on 2-Chloro-3-iodo- and 2-Chloro-5-iodopyridine

Bert U. W. Maes*a, Kristof T. J. Loonesa, Tim H. M. Jonckersa, Guy L. F. Lemièrea, Roger A. Dommissea, Achiel Haemersb
a Department of Chemistry, University of Antwerp (RUCA), Groenenborgerlaan 171, 2020 Antwerp, Belgium
Fax: +32(3)2180233; e-Mail: bert.maes@ua.ac.be;
b Department of Medicinal Chemistry, University of Antwerp (UIA), Universiteitsplein 1, 2610 Antwerp, Belgium
Weitere Informationen

Publikationsverlauf

Received 13 August 2002
Publikationsdatum:
20. November 2002 (online)

    Lizenzen und Reprints Alle Artikel dieser Rubrik

Abstract

Regioselective palladium-catalyzed aminations with anilines on 2-chloro-3-iodo- and 2-chloro-5-iodopyridine have been performed with excellent yields and good selectivity. The use of a large excess of Cs2CO3 in combination with Pd-BINAP catalyst was essential to obtain sufficiently fast reactions. The mild conditions permit the presence of base sensitive functional groups. Moreover, the catalytic system developed also allows the arylamination of aryl iodides.

Key words

palladium - aminations - chloro-iodopyridines - iodobenzenes - diarylamines

    References

  • 1a Guram AS. Rennels RA. Buchwald SL. Angew. Chem., Int. Ed. Engl.  1995,  34:  1348 
    Google Scholar
  • 1b Louie J. Hartwig JF. Tetrahedron Lett.  1995,  36:  3609 
    Google Scholar
  • For recent reviews on Pd-catalyzed amination see:
  • 2a Barañano D. Mann G. Hartwig JF. Curr. Org. Chem.  1997,  1:  287 
    Google Scholar
  • 2b Frost CG. Mendonça P. J. Chem. Soc., Perkin Trans. 1  1998,  2615 
    Google Scholar
  • 2c Hartwig JF. Angew. Chem. Int. Ed.  1998,  37:  2046 
    Google Scholar
  • 2d Muci AR. Buchwald SL. Top. Curr. Chem.  2002,  219:  131 
    Google Scholar
  • 3a Evans BE. Rittle KE. Bock MG. Dipardo RM. Freidinger RM. Whitter WL. Lundell GF. Veber DF. Anderson PS. Chang RSL. Lotti VJ. Cerino DJ. Chen TB. Kling PJ. Kunkel KA. Springer JP. Hirshfield J. J. Med. Chem.  1988,  31:  2235 
    CrossrefPubMedGoogle Scholar
  • 3b Ariëns EJ. Beld AJ. Rodrigues de Miranda JF. Simonis AM. In The Receptors a Comprehensive Treatise   O’Brien RD. Plenum Press; New York: 1979. 
    CrossrefPubMedGoogle Scholar
  • 4 Jonckers THM. Maes BUW. Lemière GLF. Dommisse R. Tetrahedron  2001,  57:  7027 
    CrossrefGoogle Scholar
  • 5 2-Chloro-3-iodo- and 2-chloro-5-iodopyridine were prepared from the corresponding commercially available amino derivatives via diazotization and subsequent reaction with KI: Sakamoto T. Kondo Y. Yamanaka H. Chem. Pharm. Bull.  1985,  33:  4764 
    Google Scholar
  • Examples of chemoselective palladium-catalyzed C-C cross-coupling reactions on chloro-iodopyridines:
  • 6a Mello JV. Finney NS. Org. Lett.  2001,  3:  4263 
    CrossrefGoogle Scholar
  • 6b Baxter P. N. W.; J. Org. Chem.; 2000, 65: 1257
    CrossrefGoogle Scholar
  • 6c Muratake H. Tonegawa M. Natsume M. Chem. Pharm. Bull.  1998,  46:  400 
    CrossrefGoogle Scholar
  • 6d Rocca P. Marsais F. Godard A. Quéguiner G. Tetrahedron  1993,  49:  49 
    CrossrefGoogle Scholar
  • 6e Sakamoto T. Kondo Y. Watanabe R. Yamanaka H. Chem. Pharm. Bull.  1986,  34:  2719 
    CrossrefGoogle Scholar
  • 7 Just before submitting this manuscript an article appeared dealing with Pd-catalyzed aminations on 3-iodo-6-arylpyridazines. PdCl2(dppf) catalyst in combination with t-BuONa was used in the reported amination reactions (Hartwig conditions). These conditions do not allow a large functional group compatibility on both coupling partners: Parrot I. Ritter G. Wermuth CG. Hibert M. Synlett  2002,  1123 
    Artikel in Thieme ConnectGoogle Scholar
  • 8 For Pd-BINAP-catalyzed aminations of aryl bromides with Cs2CO3 as base see: Wolfe JP. Buchwald SL. J. Org. Chem.  2000,  65:  1144 
    CrossrefGoogle Scholar
  • 9 Wolfe JP. Tomori H. Sadighi JP. Yin J. Buchwald SL. J. Org. Chem.  2000,  65:  1158 
    CrossrefPubMedGoogle Scholar
  • 10 Ali MH. Buchwald SL. J. Org. Chem.  2001,  66:  2560 
    CrossrefGoogle Scholar
  • 11 Komrlj J. Maes BUW. Lemière GLF. Haemers A. Synlett  2000,  1581 
    Artikel in Thieme ConnectGoogle Scholar
  • 13 Wolfe JP. Buchwald SL. J. Org. Chem.  1997,  62:  6066 
    CrossrefGoogle Scholar
  • 14 For the palladium-catalyzed N-arylation of sulfoximines, the use of aryl iodides with Pd-BINAP as catalyst in combination with a mild carbonate base has been reported. To ensure product formation in acceptable yields the use of additives (LiBr, LiCl, AgOTf) was essential: Bolm C. Hildebrand JP. J. Org. Chem.  2000,  65:  169 
    CrossrefGoogle Scholar
  • 15 Wolfe JP. Buchwald SL. J. Org. Chem.  1996,  61:  1133 
    CrossrefGoogle Scholar
  • 16 Driver MS. Hartwig JF. J. Am. Chem. Soc.  1996,  118:  7217 
    CrossrefGoogle Scholar
  • 17 Hamann BC. Hartwig JF. J. Am. Chem. Soc.  1998,  120:  7369 
    CrossrefGoogle Scholar
  • 18 Huang J. Grasa G. Nolan SP. Org. Lett.  1999,  1:  1307 
    Google Scholar
12

The reactions were followed with GC using diphenyl ether as internal standard. Aliquots of the reaction mixtures were monitored after 4, 8, 24 and 48 hours. Reactions were considered as finished if less than 5% of starting material was present: K2CO3 (48 hours), K3PO4 (24 hours) and Cs2CO3 (8 hours).

19

Buchwald originally used a double amount of XANTPHOS (Pd/2L instead of Pd/L)

20

General procedure for the selective Pd-catalyzed aminations on 2-chloro-3-iodopyridine and 2-chloro-5-iodopyridine using Pd(OAc)2-BINAP:
A round bottom flask was charged with Pd(OAc)2 (Acros, 0.03 mmol or 0.045 mmol), (±)-BINAP (Strem Chemicals, 0.03 mmol or 0.045 mmol) and toluene (Acros, 99%, 5 mL). The mixture was flushed with nitrogen for 10 minutes under magnetic stirring. In another round bottom flask chloro-iodopyridine (0.359 g, 1.5 mmol), aniline (1.8 mmol) and Cs2CO3 (Acros, 99.5%, 2.444 g, 7.5 mmol) were weighed. Then, the Pd(OAc)2-BINAP solution was added, and the flask was rinsed well with an additional amount of toluene (10 mL). The resulting mixture was flushed with nitrogen for 5 minutes under magnetic stirring and subsequently heated in an oil bath under vigorous magnetic stirring (oil bath temperature 120 °C, N2 atmosphere). After overnight reflux the mixture was cooled down to room temperature. The solid material was filtered off and washed well with CH2Cl2 (200 mL). The filtrate was evaporated and the resulting crude product was purified by flash column chromatography.

21

General procedure for the selective Pd-catalyzed aminations on 2-chloro-3-iodopyridine and 2-chloro-5-iodopyridine using Pd2(dba)3-XANTPHOS:
A round bottom flask was charged with Pd2(dba)3 (Acros, 0.015 mmol), XANTPHOS (Strem Chemicals, 0.03 mmol or 0.06 mmol) and freshly distilled dioxane (Acros, stabilized 99+%; dried over sodium/benzophenone, 3 mL). The mixture was flushed with nitrogen for 10 minutes under magnetic stirring. In another round bottom flask chloro-iodopyridine (0.359 g, 1.5 mmol), aniline (1.8 mmol) and Cs2CO3 (Acros, 99.5%, 2.1 mmol or 7.5 mmol) were weighed. Then, the Pd2(dba)3-XANTPHOS solution was added, and the flask was rinsed well with triethylamine (Aldrich, 99%; stored over K2CO3, 1.5 mL). The resulting mixture was flushed with nitrogen for 5 minutes under magnetic stirring and subsequently heated in an oil bath under vigorous magnetic stirring (oil bath temperature 100 °C, N2 atmosphere). After overnight reflux the mixture was cooled down to room temperature. The solid material was filtered off and washed well with CH2Cl2 (200 mL). The filtrate was evaporated and the resulting crude product was purified by flash column chromatography.

22

Spectroscopic data of selected compounds:
2-Chloro-3-(4-methylphenylamino)pyridine (Table 1, entries 1-3): δH (400 MHz, CDCl3): 7.78 (dd, J = 4.6, 1.7 Hz, 1 H, H-6), 7.34 (dd, J = 8.1, 1.7 Hz, 1 H, H-4), 7.14 (d, J = 8.1 Hz, 2 H, H-3′,5′), 7.03 (d, J = 8.1 Hz, 2 H, H-2′,6′), 7.00 (dd, J = 8.1 Hz, 4.6 Hz, 1 H, H-5), 6.08 (br s, 1 H, NH), 2.32 (s, 3 H, CH3); δC (400 MHz, CDCl3): 138.5, 138.3, 138.0, 137.6, 133.7, 130.0, 122.9, 121.9, 120.4, 20.6.
2-Chloro-5-(4-methylphenylamino)pyridine (Table 2, entries 1-4): δH (400 MHz, CDCl3): 8.13 (dd, J = 3.1 Hz, 0.5 Hz, 1 H, H-6), 7.35 (dd, J = 8.5 Hz, 3.1 Hz, 1 H, H-4), 7.20 (dd, J = 8.5 Hz, 0.5 Hz, 1 H, H-3), 7.19 (d, J = 8.4 Hz, 2 H, H-3′,5′), 7.04 (d, J = 8.4 Hz, 2 H, H-2′,6′), 5.74 (br s, 1 H, NH), 2.39 (s, 3 H, CH3); δC (400 MHz, CDCl3): 141.5, 140.1, 138.7, 138.3, 132.8, 130.2, 125.7, 124.2, 119.9, 20.7.

23

General procedure for the synthesis of diarylamines via Pd-catalyzed aminations on iodobenzenes:
A round bottom flask was charged with Pd(OAc)2 (Acros, 0.0034 g, 0.015 mmol), (±)-BINAP (Strem Chemicals, 0.0094 g, 0.015 mmol) and toluene (Acros, 99%, 5 mL). The mixture was flushed with nitrogen for 10 minutes under magnetic stirring. In another round bottom flask aryl iodide (1.5 mmol), aniline (1.8 mmol) and Cs2CO3 (Acros, 99.5%, 2.444 g, 7.5 mmol) were weighed. Then, the Pd(OAc)2-BINAP solution was added, and the flask was rinsed well with an additional amount of toluene (10 mL). The resulting mixture was flushed with nitrogen for 5 minutes under magnetic stirring and subsequently heated in an oil bath under vigorous magnetic stirring (oil bath temperature 120 °C, N2 atmosphere). After overnight reflux the mixture was cooled down to room temperature. The solid material was filtered off and washed well with CH2Cl2 (200 mL). The filtrate was evaporated and the resulting crude product was purified by flash column chromatography. The characterization data of N-(3-carbethoxyphenyl)-N-methylaniline, N-(4-carbethoxyphenyl)-N-methylaniline and 3-cyano-2′-carbethoxydiphenylamine were identical with those reported in the literature. [10]