Subscribe to RSS
DOI: 10.1055/s-2007-965002
© Georg Thieme Verlag KG Stuttgart · New York
Cycling on Rollers: Kreitler Fan Resistance at Submaximal Levels of Effort
Publication History
accepted after revision November 21, 2006
Publication Date:
18 September 2007 (online)
![](https://www.thieme-connect.de/media/sportsmed/200803/lookinside/thumbnails/10.1055-s-2007-965002-1.jpg)
Abstract
The goal of this investigation was to characterize the commercially available fan unit for the Kreitler® Alloy rollers at submaximal levels of effort (≤ 500 W). A single cyclist rode six times at each of three fan inlet settings (closed, half, and full open) and five fan speeds (900, 1800, 2700, 3600, and 4500 rpm). Fan power requirements were isolated by subtracting roller resistance from separate trials. Power requirements relative to fan inlet and fan speed possessed a significant interaction with the main effects for each also significant (all p < 0.001). Power increased to the cube of fan speed, regardless of inlet opening (r2 ≥ 0.997). Fan resistance was virtually non existent at 900 rpm. Fan resistance then significantly increased with increasing fan speed and inlet opening. At 4500 rpm power requirements of the fan reached 269 ± 6, 352 ± 7, and 406 ± 9 W with the inlet closed, half, and fully open, respectively (p < 0.001). The rear wheel-roller interaction supplied an additional 19 ± 2 W on up to 104 ± 4 W at the highest speed. Therefore, the fan unit increases the functionality of the rollers for a variety of training and testing environments.
Key words
cycling - headwind - power - rollers - testing - training
References
- 1 Balmer J, Davison R CR, Coleman D A, Bird S R. The validity of power output recorded during exercise performance tests using a Kingcycle air-braked cycle ergometer when compared with an SRM Powermeter. Int J Sports Med. 2000; 21 195-199
- 2 Bertucci W, Duc S, Villerius V, Pernin J N, Grappe F. Validity and reliability of the PowerTap mobile cycling powermeter when compared with the SRM device. Int J Sports Med. 2005; 26 868-873
- 3 Bertucci W, Taiar R, Grappe F. Differences between sprint tests under laboratory and actual cycling conditions. J Sports Med Physical Fitness. 2005; 45 277-283
- 4 Bolourchi F, Hull M L. Measurement of rider induced loads during simulated cycling. Int J Sport Biomech. 1985; 1 308-329
- 5 de Groot G, Welbergen E, Clijsen L, Clarus J, Cabri J, Antonis J. Power, muscular work, and external forces in cycling. Ergonomics. 1994; 37 31-42
- 6 Gardner A S, Stephens S, Martin D T, Lawton E, Hamilton L, Jenkins D. Accuracy of SRM and Power Tap power monitoring systems for bicycling. Med Sci Sports Exerc. 2004; 36 1252-1258
- 7 Hull M L, Beard A, Varma H. Goniometric measurements of hip motion in cycling while standing. J Biomech. 1990; 23 687-703
- 8 Hull M L, Jorge M. A method for biomechanical analysis of bicycle pedalling. J Biomech. 1985; 18 631-644
-
9 Kyle C.
Selecting cycling equipment. Burke ER High-Tech Cycling. 2nd edn. Champaign, IL; Human Kinetics 2003: 1-48 -
10 Mull T E.
Fans and central air systems. Mull TE HVAC Principles and Applications Manual. New York; McGraw-Hill 1998: 16.1-16.49 - 11 Paton C D, Hopkins W G. Tests of cycling performance. Sports Med. 2001; 31 489-496
- 12 Reiser R F, Watt J, Peterson M L. Cycling on rollers: influence of tyre pressure and cross section on power requirements. Sports Biomech. 2003; 2 237-249
- 13 Ryschon T W, Stray-Gunderson J S. The effect of tyre pressure on the economy of cycling. Ergonomics. 1993; 36 661-666
- 14 Soden P D, Adeyefa B A. Forces applied to a bicycle during normal cycling. J Biomech. 1979; 12 527-541
- 15 Stone C, Hull M L. The effect of rider weight on rider-induced loads during common cycling situations. J Biomech. 1995; 28 365-375
-
16 Whitt F R, Wilson D G.
Human power generation. Whitt FR, Wilson DG Bicycling Science. Cambridge, MA; MIT Press 1982: 29-70
Dr. PhD Raoul F. Reiser II
Colorado State University
Health and Exercise Science
215B Moby Arena
Fort Collins, CO 80523
United States
Phone: + 1 97 04 91 69 58
Fax: + 1 97 04 91 04 45
Email: rfreiser@CAHS.Colostate.edu