CC BY-NC-ND 4.0 · Eur J Dent 2018; 12(01): 105-110
DOI: 10.4103/ejd.ejd_172_16
Original Article
Dental Investigation Society

Effect of 0.12% chlorhexidine and zinc nanoparticles on the microshear bond strength of dentin with a fifth-generation adhesive

Homayoon Alaghehmad
1   Dental Materials Research Center, Department of Esthetic and Restorative Dentistry, Dental Materials Research Center, Babol University of Medical Sciences, Babol, Iran
,
Elham Mansouri
2   Department of Esthetic and Restorative Dentistry, Babol University of Medical Sciences, Babol, Iran
,
Behnaz Esmaili
1   Dental Materials Research Center, Department of Esthetic and Restorative Dentistry, Dental Materials Research Center, Babol University of Medical Sciences, Babol, Iran
,
Ali Bijani
3   Social Determinant of Health Research Center, Babol University of Medical Sciences, Babol, Iran
,
Sogol Nejadkarimi
4   Department of Esthetic and Restorative Dentistry, Shahid beheshti University of Medical Sciences, Tehran, Iran
,
Mohsen Rahchamani
5   Doctor of Dental Surgery, Private Practice, Tehran, Iran
› Author Affiliations
Further Information

Publication History

Publication Date:
13 September 2019 (online)

ABSTRACT

Objective: In this study, we compared the effects of 0.12% chlorhexidine (CHX) and nano zinc oxide (NZO) on the microshear bond strength of dentin with a fifth-generation adhesive after acid etching. Materials and Methods: Forty molar teeth were randomly divided into four main groups based on dentin surface treatment technique (a) control (single bond 2); (b) NZO; (c) CHX; and (d) NZO + CHX. In each group, half of the samples underwent thermocycling, with no thermocycling in the other half. Then, failure mode was evaluated under a stereomicroscope. Statistical analysis was performed using t-test, two-way ANOVA, and Chi-squared test. Results: The mean microshear bond strength of the groups without thermocycling was more than that of the groups with thermocycling, but there were no statistically significant differences between the groups with and without thermocycling in pair-wise comparisons. Conclusion: Pretreatment with NZO and CHX separately and simultaneously had no effect on the microshear bond strength of a fifth-generation adhesive.

 
  • REFERENCES

  • 1 Boruziniat A, Babazadeh M, Gifani M. Effect of chlorhexidine application on bond durability of a filled-adhesive system. J Dent Mater Tech 2013; 2: 6-10
  • 2 Suryakumari NB, Reddy PS, Surender LR, Kiran R. In vitro evaluation of influence of salivary contamination on the dentin bond strength of one-bottle adhesive systems. Contemp Clin Dent 2011; 2: 160-4
  • 3 Chaharom ME, Ajami AA, Kimyai S, Abbasi A. Effect of chlorhexidine on the shear bond strength of self-etch adhesives to dentin. Afr J Biotechnol 2011; 10: 10054-7
  • 4 Shafiei F, Memarpour M. Antibacterial activity in adhesive dentistry: A literature review. Gen Dent 2012; 60: e346-56
  • 5 Elkassas DW, Fawzi EM, El Zohairy A. The effect of cavity disinfectants on the micro-shear bond strength of dentin adhesives. Eur J Dent 2014; 8: 184-90
  • 6 Indira MD, Nandlal B. Comparative evaluation of the effect of cavity disinfectants on the fracture resistance of primary molars restored with indirect composite inlays: Anin vitro study. J Indian Soc Pedod Prev Dent 2010; 28: 258-63
  • 7 Moon PC, Weaver J, Brooks CN. Review of matrix metalloproteinases' effect on the hybrid dentin bond layer stability and chlorhexidine clinical use to prevent bond failure. Open Dent J 2010; 4: 147-52
  • 8 Osorio R, Yamauti M, Osorio E, Ruiz-Requena ME, Pashley D, Tay F. et al. Effect of dentin etching and chlorhexidine application on metalloproteinase-mediated collagen degradation. Eur J Oral Sci 2011; 119: 79-85
  • 9 Spencer P, Ye Q, Park J, Topp EM, Misra A, Marangos O. et al. Adhesive/dentin interface: The weak link in the composite restoration. Ann Biomed Eng 2010; 38: 1989-2003
  • 10 Komori PC, Pashley DH, Tjäderhane L, Breschi L, Mazzoni A, de Goes MF. et al. Effect of 2% chlorhexidine digluconate on the bond strength to normal versus caries-affected dentin. Oper Dent 2009; 34: 157-65
  • 11 Alaghemand H, Esmaeili B, Firouz P, Soltani M, Rouhaninasab M, Bijani A. A comparative study of the preventive effect of chlorhexidine o. 12% and nano zinc oxide particles on the distraction of collagen scaffolding of the hybrid layer by two immunohistochemistry and microleakage tests. Dent Med Res 2014; 2: 33-8
  • 12 Osorio R, Yamauti M, Osorio E, Román JS, Toledano M. Zinc-doped dentin adhesive for collagen protection at the hybrid layer. Eur J Oral Sci 2011; 119: 401-10
  • 13 Leitune VC, Portella FF, Bohn PV, Collares FM, Samuel SM. Influence of chlorhexidine application on longitudinal adhesive bond strength in deciduous teeth. Braz Oral Res 2011; 25: 388-92
  • 14 Sadek FT, Braga RR, Muench A, Liu Y, Pashley DH, Tay FR. Ethanol wet-bonding challenges current anti-degradation strategy. J Dent Res 2010; 89: 1499-504
  • 15 Pupo YM, Michél MD, Gomes OM, Lepienski CM, Gomes JC. Effect of the regional variability of dentinal substrate and modes of application of adhesive systems on the mechanical properties of the adhesive layer. J Conserv Dent 2012; 15: 132-6
  • 16 Singh H, Kapoor P, Dhillon J, Kaur M. Evaluation of three different concentrations of chlorhexidine for their substantivity to human dentin. Indian J Dent 2014; 5: 199-201
  • 17 Carrilho MR, Carvalho RM, Sousa EN, Nicolau J, Breschi L, Mazzoni A. et al. Substantivity of chlorhexidine to human dentin. Dent Mater 2010; 26: 779-85
  • 18 Gendron R, Grenier D, Sorsa T, Mayrand D. Inhibition of the activities of matrix metalloproteinases 2, 8, and 9 by chlorhexidine. Clin Diagn Lab Immunol 1999; 6: 437-9
  • 19 Pashley DH, Tay FR, Yiu C, Hashimoto M, Breschi L, Carvalho RM. et al. Collagen degradation by host-derived enzymes during aging. J Dent Res 2004; 83: 216-21
  • 20 Brackett MG, Tay FR, Brackett WW, Dib A, Dipp FA, Mai S. et al. In vivo chlorhexidine stabilization of hybrid layers of an acetone-based dentin adhesive. Oper Dent 2009; 34: 379-83
  • 21 Soares C, Pereira C, Pereira J, Santana F, Prado C. Effect of chlorhexidine application on microtensile bond strength to dentin. Operative dentistry 2008; 33: 183-8
  • 22 Elekdag-Turk S, Turk T, Isci D, Ozkalayci N. Thermocycling effects on shear bond strength of a self-etching primer. Angle Orthod 2008; 78: 351-6
  • 23 Korkmaz Y, Gurgan S, Firat E, Nathanson D. Effect of adhesives and thermocycling on the shear bond strength of a nano-composite to coronal and root dentin. Oper Dent 2010; 35: 522-9
  • 24 Titley K, Caldwell R, Kulkarni G. Factors that affect the shear bond strength of multiple component and single bottle adhesives to dentin. Am J Dent 2003; 16: 120-4
  • 25 Al-Hana DA, El-Messairy A, Shohayb F, Alhadainy H. Micro-shear bond strength of different composites and glass-ionomers used to reinforce root dentin. Tanta Dent J 2013; 10: 58-66
  • 26 Breschi L, Mazzoni A, Nato F, Carrilho M, Visintini E, Tjäderhane L. et al. Chlorhexidine stabilizes the adhesive interface: A 2-yearin vitro study. Dent Mater 2010; 26: 320-5
  • 27 De Munck J, Van den Steen PE, Mine A, Van Landuyt KL, Poitevin A, Opdenakker G. et al. Inhibition of enzymatic degradation of adhesive-dentin interfaces. J Dent Res 2009; 88: 1101-6
  • 28 Mazzoni A, Pashley DH, Nishitani Y, Breschi L, Mannello F, Tjäderhane L. et al. Reactivation of inactivated endogenous proteolytic activities in phosphoric acid-etched dentine by etch-and-rinse adhesives. Biomaterials 2006; 27: 4470-6