Synlett 2020; 31(11): 1073-1076
DOI: 10.1055/s-0040-1708016
letter
© Georg Thieme Verlag Stuttgart · New York

Ruthenium(II)-Complex-Catalyzed Acceptorless Double Dehydrogenation of Primary Amines to Nitriles

Muthukumar Kannan
,
Department of Chemistry, National Institute of Technology Kurukshetra, Kurukshetra-136119, Haryana, India   Email: msenthil@nitkkr.ac.in
› Author Affiliations
The authors acknowledge TEQIP-III for financial assistance in the form of a fellowship to M.K.
Further Information

Publication History

Received: 04 February 2020

Accepted after revision: 27 March 2020

Publication Date:
16 April 2020 (online)

 


Abstract

Acceptorless dehydrogenative oxidation of primary amines into nitriles using an in situ complex derived from commercially available dichloro(1,5-cyclooctadiene) ruthenium(II) complex and simple hexamethylenetetramine has been demonstrated. The synthetic protocol is highly selective and yields the nitrile compounds in moderate to excellent yields and produces hydrogen as the sole byproduct.


#

Nitrile compounds play a vital role in the field of synthetic chemistry for the synthesis of several industrially important products.[1] As a result; several methods are available for the synthesis of nitrile compounds. Some of the important traditional methods available for the synthesis of nitrile compounds include Sandmeyer-type reaction, ammoxidation reaction, Rosenmund–von Braun reaction, and other methods which use stoichiometric amounts of oxidizing agents such as MnO2, HgO–I2, DDQ, IBX, S, and many others.[2] [3] All the traditional methods suffer from several drawbacks such as the use of toxic reagents/reactants, poor atom economy, and harsh reaction conditions.[2,3] Among several existing methods for the synthesis of nitrile compounds from a variety of starting materials, oxidation of amines using transition-metal catalysts provides direct access. The transition-metal-catalyzed oxidation of amines involves two different pathways, namely aerobic oxidation and dehydrogenative oxidation. The aerobic oxidation of amines works in the presence of transition-metal catalyst in combination with an external oxygen source and produces water as the side product.[4] Though, this method is very efficient in producing nitriles, sometimes it suffers from selectivity issues forming other possible side product such as amide.[4a] The second methodology which involves the metal-catalyzed dehydrogenative oxidation was found to be very superior compared to aerobic oxidation and other traditional methods as it is very clean, producing hydrogen as the sole byproduct, and has high atom economy (Scheme [1]). Moreover, the metal-catalyzed dehydrogenative oxidation methodology was identified as a potential candidate in the field of hydrogen storage and transportation as amines are considered as liquid organic hydrogen carriers (LOHCs).[5]

Zoom Image
Scheme 1 Ruthenium-catalyzed oxidation of primary amine

Notwithstanding its potential applications, the reported catalyst systems for the dehydrogenation of amines, especially the dehydrogenation of primary amine to form nitriles, are scarce. To the best of our knowledge only three catalyst systems are available in the literature for the acceptorless and dehydrogenative oxidation of primary amines to form nitrile compounds. The complexes are pyridine-based PNN-pincer ruthenium complex by Szymczak and co-workers,[6] Ru(p-cymene) system reported by Bera and co-workers,[7] and [Ru(benzene)Cl2]2 reported by our group (Scheme [2]).[8]

Zoom Image
Scheme 2 Ruthenium-catalyzed double dehydrogenation of amines

In transition-metal-catalyzed organic transformations, the role of additives is crucial in deciding the selectivity and efficiency of the catalyst system. The added additive works in tandem with metal catalyst by providing different reaction pathway by activating catalyst and/or substrate(s).[9] It has been reported in the literature that hexamethylenetetramine (HMTA) upon decomposition can act as a source of small molecules such as NH3, H2, HCN, HCHO, CO, CO2, and many others, which makes HMTA an interesting molecule in organic synthesis.[10] Recently, we have reported the first example of hexamethylenetetramine (HMTA) being simultaneously acting as both base as well as hydride donor in [Ru(benzene)Cl2]2-catalyzed acceptorless amine dehydrogenation reaction.[8] In view of extending the chemistry of HMTA as a cheap and versatile additive, we explored its reactivity in combination with other ruthenium complexes. Herein, we report the efficient conversion of primary amines into nitriles using the commercially available [Ru(COD)Cl2]n as the pre-catalyst and simple HMTA as the additive. Experimental studies proved that the oxidation of primary amines to nitriles involves double dehydrogenation pathway with the evolution of hydrogen as the sole byproduct.

Encouraged by the activity of [Ru(benzene)Cl2]2 for the dehydrogenative oxidation of amines, we tested the activity of [Ru(COD)Cl2]n (1) in combination with HMTA (2) for the dehydrogenation of amines. The dehydrogenation of benzylamine (3a) to form benzonitrile (4a) was taken as the model reaction, and several reactions were carried out to optimize the reaction conditions as depicted in Table [1].

Table 1 Optimization of Reaction Conditions for Catalytic Dehydrogenation of Benzylamine (3a)

Entry

[Ru] (mol%)

HMTA (mol%)

Solvent

Temp (°C)

Time (h)

Yield of 4a (%)a

 1

5

toluene

110

24

27

 2

5

toluene

110

24

 3

0.5

0.5

toluene

110

24

56

 4

1

1

toluene

110

24

70

 5

2

2

toluene

110

24

85

 6

3

3

toluene

110

24

97

 7

3

3

THF

 64

24

 0

 8

3

3

CH2Cl2

 40

24

 2

 9

3

3

toluene

 80

24

54

10

3

3

toluene

 80

 6

42

11

3

3

toluene

 80

12

56

a GC yields using dodecane as the internal standard and average of at least two runs.

Initially, 5 mol% of 1 was tested for the conversion of 3a into 4a in the absence of any additive under toluene reflux conditions for 24 h, which resulted in the formation of nitrile product 4a in poor yield (Table [1], entry 1). When HMTA (2) was employed in the absence of Ru complex, no formation of product was observed (entry 2). However, when the activity of 0.5 mol% of 1 combination with 0.5 mol% 2 was tested, it led to increase in the yield of 4a (entry 3). Further increase in catalyst/additive loading resulted in the increased yield of the product, and excellent yields were obtained while using 3 mol% both 1 and 2 (entries 4–6). After identifying the suitable catalyst and additive ratio and amount, other parameters such as reaction solvent, temperature, and time were optimized and identified that toluene reflux conditions for 24 h were ideal for the dehydrogenative oxidation of amine to form nitrile (entries 7–11).

After optimizing the reaction conditions for the double dehydrogenation of amines to form nitriles, we explored the substrate scope of our catalyst system as shown in Table [2].

Zoom Image
Scheme 3 Dehydrogenation of 4-aminobenzylamine

Initially, in view of testing the electronic effect on the yield of nitrile product, a series of substituted benzylamine substrates were tested. The presence of electron-donating substituents such as methyl (3b) and methoxy (3c) groups in the para position gave the corresponding nitrile products 4b and 4c, respectively, in excellent yields (Table [2], entries 2 and 3). The slight decrease in the yields of nitrile product was observed when electron-withdrawing substituents, namely chloro (3b), fluoro (3e), and nitro (3f), were present in the para position (entries 4–6). Moreover, the halogen and nitro groups were retained in the nitrile products indicating the very good functional group tolerance of our catalyst system. The presence of substituents such as methyl (3g) and chloro (3h) groups in the ortho position gave the nitrile products 4g and 4h in moderate yields, showing the developed catalyst system is sensitive towards the steric factor (entries 7 and 8). The dehydrogenation of few alkyl amines was also tested and all of them gave the corresponding nitrile products in very good yields (entries 9–11).

Table 2 Dehydrogenative Oxidation of Amines to Nitrilesa

Entry

Substrate 3

Product 4

Isolated yield (%)b

 1

3a R = H

4a

88

 2

3b R = CH3

4b

92

 3

3c R = OCH3

4c

90

 4

3d R = Cl

4d

82

 5

3e R = F

4e

80

 6

3f R = NO2

4f

79

 7

3g

4g

73

 8

3h

4h

70

 9

3i

4i

83

10

3j

4j

80

11

3k

4k

82

a Reactions were carried out with amine substrate (0.47 mmol), Ru(COD)Cl2 (3 mol%), and HMTA (3 mol%) in toluene (0.6 mL) under reflux.

b Isolated yields and average of at least two runs.

In order to check the selectivity and functional group tolerance, the double dehydrogenation of 4-aminobenzylamine (3l) having both H2N–CR2 and H2N–CH2– groups was attempted using the present catalyst system (Scheme [3]). The reaction resulted in the formation of 4-aminobenzonitrile (4l) as the only product in good yield. This result shows the very good selectivity of our catalyst system. In addition, this also proves the oxidation reaction involving the dehydrogenative pathway without forming 4-nitrobenzonitrile, which is possible during aerobic oxidation in the presence of any external oxygen source.

Further, to confirm the evolution of hydrogen gas and dehydrogenative pathway, the double dehydrogenation of benzylamine was conducted using the present catalyst system in the presence of a hydrogen acceptor such as cyclohexene. In a typical closed-vessel reaction, 1 (3 mol%), 2 (3 mol%), benzylamine, and cyclohexene in 1:10 equivalent ratio were taken heated at 115 °C for 24 h using toluene as the solvent (Scheme [4]). This resulted in the formation of cyclohexane in 24% yield.

Zoom Image
Scheme 4 Dehydrogenation of benzylamine in the presence of cyclohexene
Zoom Image
Scheme 5 Mechanism for the oxidation of amine to nitrile

The above reaction suggested that the reaction involved hydrogen evolution and followed the dehydrogenative pathway (Scheme [4]). Based on the literature report and our experimental results, the following mechanism has been proposed for the double dehydrogenation of primary amines to form nitrile compounds (Scheme [5]). In our previous report we proved the formation of Ru(H)2 species as the catalytically active species during dehydrogenation of primary amines while using [Ru(benzene)Cl2]2 as the pre-catalyst and HMTA as the additive.[8] Further, we experimentally proved that HMTA acted simultaneously as a source of base as well as hydride donor. According to the proposed mechanism the catalytically active species [Ru(H)2] (A) is generated from a reaction between complex 1 and additive 2. The active catalyst A upon reaction with primary amine, followed by elimination of hydrogen molecule lead to the formation of amine-coordinated Ru–hydride complex B. The complex B undergoes β-elimination to form the imine-coordinated Ru–dihydride intermediate C. The formation of imine-coordinated Ru complex was observed in the in situ 1H NMR study of dehydrogenation of benzylamine using the present catalyst system (Figure S13 in the Supporting Information). The complex C upon elimination of hydrogen molecule and β-elimination resulted in the formation of nitrile-coordinated ruthenium complex D. The complex D further undergoes reductive elimination to yield the nitrile product and regenerate the active catalyst A.

In conclusion, the double dehydrogenation of several primary amines to form nitrile products using an in situ catalyst system generated from [Ru(COD)Cl2]n as the pre-catalyst and HMTA as the additive was developed.[11] [12] [13] The present catalyst system is highly atom economic as it avoids the use of any oxidizing agent/hydrogen acceptor and yielded the nitrile products even in good to excellent yields. The mechanism studies revealed that the reaction involves dehydrogenative pathway with the evolution of hydrogen molecule.


#

Supporting Information



Zoom Image
Scheme 1 Ruthenium-catalyzed oxidation of primary amine
Zoom Image
Scheme 2 Ruthenium-catalyzed double dehydrogenation of amines
Zoom Image
Scheme 3 Dehydrogenation of 4-aminobenzylamine
Zoom Image
Scheme 4 Dehydrogenation of benzylamine in the presence of cyclohexene
Zoom Image
Scheme 5 Mechanism for the oxidation of amine to nitrile