Subscribe to RSS
DOI: 10.1055/s-2008-1066990
Hydrogen Peroxide: A Versatile Reagent in Organic Synthesis
Publication History
Publication Date:
28 March 2008 (online)
Biographical Sketches
Introduction
Hydrogen peroxide (H2O2) is a strong oxidizing agent and a weak acid in aqueous solution. It is a very pale blue liquid which appears colorless in dilute solution and is completely miscible with water. Hydrogen peroxide and its highly concentrated aqueous solutions (>65%) are soluble in a range of organic solvents, for example carboxylic esters. It decomposes in a violent reaction into water and oxygen if heated above 80 °C. It also decomposes under the influence of light and in the presence of metal ions or oxidizable organic materials. Hydrogen peroxide is commercially available in concentrations of 3-90% as a solution in water.
Hydrogen peroxide and water do not form azeotropic mixtures and can be completely separated by distillation. By fractional crystallization of highly concentrated solutions 100% pure hydrogen peroxide can be obtained. Pure hydrogen peroxide is usually only of academic interest and is not produced on industrial scale.
Hydrogen peroxide is manufactured by the autoxidation of 2-ethyl-9,10-dihydroxyanthracene to 2-ethylanthraquinone and hydrogen peroxide using oxygen from the air. [1]
Abstracts
(A) Hydrogen peroxide is a versatile reagent for the oxidation of sulfides to sulfoxides. Racemic and chiral sulfoxides can be obtained. Zhu and co-workers have reported the asymmetric oxidation of sulfides as well as the kinetic resolution of sulfoxides with hydrogen peroxide in air by a salan-vanadium catalyst; this method provides an efficient procedure for the preparation of chiral sulfoxides in good chemical yields and excellent enantiomeric purities. [2] | |
(B) Hydrogen peroxide has been extensively used for the transformation of alkenes into alcohols. The hydroboration-oxidation sequence constitutes a powerful method for the regio- and stereoselective synthesis of alcohols; usually the OH group binds to the less-substituted carbon atom (anti-Markovnikoff product). [3] Besides, Knochel and co-workers used diphosphines as ligands in the rhodium-catalyzed asymmetric hydroboration of styrene derivatives. The Markovnikoff product was obtained in good yield and good enantiomeric excess. [3c] | |
(C) Syn-dihydroxylation of alkenes is carried out with hydrogen peroxide in the presence of catalytic osmium tetroxide. [4] A clean and safe method under organic-solvent and metal-free conditions was also reported. [5] Another way to afford 1,2-diols is a rhodium-catalyzed syn-addition of bis(catecholato)diboron and subsequent oxidation with hydrogen peroxide. [6] | |
(D) Hydrogen peroxide can be used as oxidizing agent in Baeyer-Villiger oxidation to transform ketones into esters or cyclic ketones into lactones. The asymmetric version of this reaction has also been reported using platinum(II) complexes [7] or a novel planar-chiral bisflavin [8] as catalysts. An unexpected rearrangement of the initially formed ring-expanded lactone was observed and used in the total synthesis of farnesiferol. [9] | |
(E) Hydrogen peroxide provides an efficient conversion of alkenes into the respective epoxides. This epoxidation gives the product in good to excellent yields. A range of substrates such as α,β-unsaturated carbonyl compounds or functionalized olefins has been used. Metallic [10] or organic [11] catalysts can be used; it is also possible to carry out the epoxidation in an enantioselective manner. | |
(F) The oxidative work-up with hydrogen peroxide after ozonolysis gives carboxylic acids or ketones. Hodgson et al. have successfully used this reaction to complete the stereoselective synthesis of cis-nemorensic acid and 4-hydroxy-cis-nemorensic acid. [12] | |
(G) Gopinath and Patel [13] reported a new catalytic oxidative esterification of aldehydes. This method has advantages over previous methods with respect to the use of environmentally benign catalyst and reagent, cost-effectiveness, high efficiency, mild reaction conditions, shorter reaction times, and facile isolation of the desired products. | |
(H) Direct ketohydroxylation can be achieved when olefins are treated with hydrogen peroxide in chloroform containing a catalytic amount of 12-tungstophosphoric acid (WPA, 10%) combined with cetylpyridiniumchloride (CPC, 30%) as phase-transfer catalyst at 60 °C. Various α-hydroxyketones can be obtained in good yields and high regioselectivities. [14] |
- 1
Jones CW. Application of Hydrogen Peroxide and Derivatives Royal Society of Chemistry; Cambridge: 1999. -
2a
Karimi B.Ghoreishi-Nezhad M.Clark JH. Org. Lett. 2005, 7: 625 -
2b
Matteucci M.Bhalay G.Bradley M. Org. Lett. 2003, 5 : 5235 -
2c
Mba M.Prins LJ.Licini G. Org. Lett. 2007, 9: 21 -
2d
Sun J.Zhu C.Dai Z.Xang M.Pan Y.Hu H. J. Org. Chem. 2004, 69: 8500 -
3a
Clay JM.Vedejs E. J. Am. Chem. Soc. 2005, 127: 5766 -
3b
Makabe H.Kong LK.Hirota M. Org. Lett. 2003, 5: 27 -
3c
Demay S.Volant F.Knochel P. Angew. Chem. Int. Ed. 2001, 40: 1235 - 4
Jonsson SY.Adolfsson H.Bäckvall J.-E. Org. Lett. 2001, 3: 3463 - 5
Usui Y.Sato K.Tanaka M. Angew. Chem. Int. Ed. 2003, 42: 5623 - 6
Trudeau S.Morgan JM.Shrestha M.Morken JP.
J. Org. Chem. 2005, 70: 9538 -
7a
Sgarbossa P.Scarso A.Michelin RA.Strukul G. Organometallics 2007, 26: 2714 -
7b
Paneghetti C.Gavagnin R.Pinna F.Strukul G. Organometallics 1999, 18: 5057 - 8
Murahashi S.Ono S.Imada Y. Angew. Chem. Int. Ed. 2002, 41: 2366 - 9
Demnitz FW.Philippini C.Raphael RA. J. Org. Chem. 1995, 60: 5114 -
10a
Lane BS.Vogt M.DeRosa VJ.Burgess K. J. Am. Chem. Soc. 2002, 124: 11946 -
10b
Tong K.-H.Wong K.-Y.Chan TH. Org. Lett. 2003, 5: 3423 - 11
Marigo M.Franzen J.Poulsen TB.Zhuang W.Jørgensen KA. Org. Biomol. Chem. 2005, 3: 3883 - 12
Hodgson DM.Avery TD.Donohue AC. Org. Lett. 2002, 4: 1809 - 13
Gopinath R.Patel B. Org. Lett. 2000, 2: 577 - 14
Zhang Y.Shen Z.Tang J.Zhang Y.Kong L.Zhang Y. Org. Biomol. Chem. 2006, 4: 1478
References
- 1
Jones CW. Application of Hydrogen Peroxide and Derivatives Royal Society of Chemistry; Cambridge: 1999. -
2a
Karimi B.Ghoreishi-Nezhad M.Clark JH. Org. Lett. 2005, 7: 625 -
2b
Matteucci M.Bhalay G.Bradley M. Org. Lett. 2003, 5 : 5235 -
2c
Mba M.Prins LJ.Licini G. Org. Lett. 2007, 9: 21 -
2d
Sun J.Zhu C.Dai Z.Xang M.Pan Y.Hu H. J. Org. Chem. 2004, 69: 8500 -
3a
Clay JM.Vedejs E. J. Am. Chem. Soc. 2005, 127: 5766 -
3b
Makabe H.Kong LK.Hirota M. Org. Lett. 2003, 5: 27 -
3c
Demay S.Volant F.Knochel P. Angew. Chem. Int. Ed. 2001, 40: 1235 - 4
Jonsson SY.Adolfsson H.Bäckvall J.-E. Org. Lett. 2001, 3: 3463 - 5
Usui Y.Sato K.Tanaka M. Angew. Chem. Int. Ed. 2003, 42: 5623 - 6
Trudeau S.Morgan JM.Shrestha M.Morken JP.
J. Org. Chem. 2005, 70: 9538 -
7a
Sgarbossa P.Scarso A.Michelin RA.Strukul G. Organometallics 2007, 26: 2714 -
7b
Paneghetti C.Gavagnin R.Pinna F.Strukul G. Organometallics 1999, 18: 5057 - 8
Murahashi S.Ono S.Imada Y. Angew. Chem. Int. Ed. 2002, 41: 2366 - 9
Demnitz FW.Philippini C.Raphael RA. J. Org. Chem. 1995, 60: 5114 -
10a
Lane BS.Vogt M.DeRosa VJ.Burgess K. J. Am. Chem. Soc. 2002, 124: 11946 -
10b
Tong K.-H.Wong K.-Y.Chan TH. Org. Lett. 2003, 5: 3423 - 11
Marigo M.Franzen J.Poulsen TB.Zhuang W.Jørgensen KA. Org. Biomol. Chem. 2005, 3: 3883 - 12
Hodgson DM.Avery TD.Donohue AC. Org. Lett. 2002, 4: 1809 - 13
Gopinath R.Patel B. Org. Lett. 2000, 2: 577 - 14
Zhang Y.Shen Z.Tang J.Zhang Y.Kong L.Zhang Y. Org. Biomol. Chem. 2006, 4: 1478