Comparison of the axial stiffness of carbon composite and aluminium alloy circular external skeletal fixator rings

Summary

Objectives: The purpose of this study was to compare the axial stiffness of aluminium alloy and carbon composite single-ring constructs.

Methods: Single-ring constructs were made with rings of different material compositions (aluminium alloy and carbon composite), diameters (55 mm, 85 mm, and 115 mm), and thicknesses (6 mm for the single-ring, 12 mm for the double-ring) with all other components remaining constant. Stiffness of each construct was determined under loading in axial compression with a materials testing machine. The axial stiffness of each group was compared using a three-factor factorial analysis of variance investigating all main effects and interactions between ring diameter, ring thickness, and ring material composition; p <0.05 was considered significant.

Results: Carbon composite constructs were 16-55% as stiff as corresponding aluminium alloy constructs. Within each combination of ring material composition and ring diameter, stiffness did not significantly increase when the ring thickness was doubled. Within each combination of ring material composition and ring thickness, stiffness significantly decreased with increased ring diameter.

Clinical significance: Aluminium alloy rings were found to be significantly stiffer than carbon composite rings. Although the carbon composite rings were considerably less stiff, clinical recommendations cannot be made from a single-ring in vitro analysis. Further studies are needed to evaluate the behaviour of these rings in vivo.

Keywords

biomechanics - circular external skeletal fixator - axial - compression

• References

• 1 Lewis DD, Radasch RM, Beale BS. et al. Initial clinical experience with the IMEX™ circular external skeletal fixation system - part I: Use in fractures and arthrodeses. Vet Comp Orthop Traumatol 1999; 12: 108-117.
• 2 Lewis DD, Radasch RM, Beale BS. et al. Initial clinical experience with the IMEX™ circular external skeletal fixation system - part II: Use in bone lengthening and correction of angular and rotational deformities. Vet Comp Orthop Traumatol 1999; 12: 118-127.
• 3 Rovesti GL, Bosio B, Marcellin-Little DJ. Management of 49 antebrachial and crural fractures in dogs using circular external fixators. J Small Anim Pract 2007; 49: 194-200.
• 4 Rovesti GL, Schwarz G, Bogoni P. Treatment of 30 angular limb deformities of the antebrachium and the crus in the dog using circular external fixators. The Open Veterinary Science Journal 2009; 3: 41-54.
• 5 Watson MA, Mathias KJ, Maffulli N. External ring fixators: an overview. Proc Instn Mech Engrs 2000; 214: 459-470.
• 6 Lewis DD, Bronson DG, Samchukov ML. et al. Biomechanics of circular external skeletal fixation. Vet Surg 1998; 27: 454-464.
• 7 Baran O, Havitcioglu H, Tatari H. et al. The stiffness characteristics of hybrid Ilizarov fixators. J Biomech 2008; 41: 2960-2963.
• 8 Gasser B, Boman B, Wyder D. et al. Stiffness characteristics of the circular Ilizarov device as opposed to conventional external fixators. J Biomech Eng 1990; 112: 15-21.
• 9 Hudson CC, Pozzi A, Lewis DD. Minimally invasive plate osteosynthesis: Applications and techniques in dogs and cats. Vet Comp Orthop Traumatol 2009; 22: 175-182.
• 10 Lewis DD, Bronson DG, Cross AR. et al. Axial characteristics of circular external skeletal fixator single ring constructs. Vet Surg 2001; 30: 386-394.
• 11 Tosborvorn S, Cheechareon S, Ruttanuchun K. et al. Mechanical evaluation of aluminum alloy ring fixator. J Med Assoc Thai 2006; 89: 1896-1901.
• 12 Nele U, Maffulli N, Pintore E. Biomechanics of radiotransparent circular external fixators. Clin Orthop Relat Res 1994; 308: 68-72.
• 13 Kummer FJ. Technical note: evaluation of new Ilizarov rings. Bull Hosp Jt Dis Orthop Inst 1990; 50: 88-90.
• 14 Cross AR, Lewis DD, Murphy ST. et al. Effects of ring diameter and wire tension on the axial biomechanics of four-ring circular external skeletal fixators constructs. Am J Vet Res 2001; 62: 1025-1030.
• 15 Kummer FJ. Biomechanics of the Ilizarov external fixators. Clin Orthop Relat Res 1992; 280: 11-14.
• 16 Bronson DG, Samchukov ML, Birch JG. et al. Stability of external circular fixation: a multi-variable biomechanical analysis. Clin Biomech 1998; 13: 441-448.
• 17 Grivas TB, Magnissalis EA. The use of twin-ring Ilizarov external fixator constructs: application and biomechanical proof-of principle with possible clinical indications. J Orthop Surg Res 2011; 6: 41.