Fracture of Highly Cross-linked All-Polyethylene Patella after Total Knee Arthroplasty

ABSTRACT

Recent advances in polyethylene fabrication have led to the introduction of highly cross-linked polyethylene tibial and patellar components for use in total knee arthroplasty (TKA) with the goal of reducing wear-related osteolysis. However, some reports suggest decreased mechanical strength as a result of the additional thermal and sterilization treatments in the manufacturing of implants. Complications related to the patella are among the most common causes of failure in TKA, but patellar component fracture is rare. The authors report a case of a highly cross-linked all-polyethylene patellar component that failed as a result of fracture in vivo in a patient 3 years after TKA.

KEYWORDS

Highly cross-linked - polyethylene - patella - total knee arthroplasty - failure

REFERENCES

• 1 Sharkey P F, Hozack W J, Rothman R H, Shastri S, Jacoby S M. Insall Award paper. Why are total knee arthroplasties failing today?.  Clin Orthop Relat Res. 2002;  404 7-13
• 2 Wright T M. Polyethylene in knee arthroplasty: what is the future?.  Clin Orthop Relat Res. 2005;  440 141-148
• 3 Hodrick J T, Severson E P, McAlister D S, Dahl B, Hofmann A A. Highly crosslinked polyethylene is safe for use in total knee arthroplasty.  Clin Orthop Relat Res. 2008;  466 2806-2812
• 4 Minoda Y, Aihara M, Sakawa A et al.. Comparison between highly cross-linked and conventional polyethylene in total knee arthroplasty.  Knee. 2009;  16 348-351
• 5 Bradford L, Baker D, Ries M D, Pruitt L A. Fatigue crack propagation resistance of highly crosslinked polyethylene.  Clin Orthop Relat Res. 2004;  429 68-72
• 6 Asano T, Akagi M, Clarke I C, Masuda S, Ishii T, Nakamura T. Dose effects of cross-linking polyethylene for total knee arthroplasty on wear performance and mechanical properties.  J Biomed Mater Res B Appl Biomater. 2007;  83 615-622
• 7 Reilly D T, Martens M. Experimental analysis of the quadriceps muscle force and patello-femoral joint reaction force for various activities.  Acta Orthop Scand. 1972;  43 126-137
• 8 Dahlkvist N J, Mayo P, Seedhom B B. Forces during squatting and rising from a deep squat.  Eng Med. 1982;  11 69-76
• 9 Ahmed A M, Burke D L, Hyder A. Force analysis of the patellar mechanism.  J Orthop Res. 1987;  5 69-85
• 10 Takeuchi T, Lathi V K, Khan A M, Hayes W C. Patellofemoral contact pressures exceed the compressive yield strength of UHMWPE in total knee arthroplasties.  J Arthroplasty. 1995;  10 363-368
• 11 Rosenberg A G, Andriacchi T P, Barden R, Galante J O. Patellar component failure in cementless total knee arthroplasty.  Clin Orthop Relat Res. 1988;  236 106-114
• 12 Tomita N, Kitakura T, Onmori N, Ikada Y, Aoyama E. Prevention of fatigue cracks in ultrahigh molecular weight polyethylene joint components by the addition of vitamin E.  J Biomed Mater Res. 1999;  48 474-478
• 13 Meding J B, Fish M D, Berend M E, Ritter M A, Keating E M. Predicting patellar failure after total knee arthroplasty.  Clin Orthop Relat Res. 2008;  466 2769-2774
• 14 Huang C H, Liau J J, Ho F Y, Lin C Y, Young T H, Cheng C K. Polyethylene failure of the patellar component in New Jersey low-contact stress total knee arthroplasties.  J Arthroplasty. 2005;  20 202-208
• 15 Francke E I, Lachiewicz P F. Failure of a cemented all-polyethylene patellar component of a Press-Fit Condylar Total Knee arthroplasty.  J Arthroplasty. 2000;  15 234-237
• 16 Edwards T B, D'Ambrosia R D. Fracture of a three peg, nonmetal-backed, polyethylene patellar component.  Orthopedics. 2002;  25 856-857
• 17 van Jonbergen H P, Werkman D M, Barnaart A F. Dissociation of mobile-bearing patellar component in low contact stress patellofemoral arthroplasty, its mechanism and management: two case reports.  Cases J. 2009;  2 7502
• 18 Huang C H, Lee Y M, Lai J H, Liau J J, Cheng C K. Failure of the all-polyethylene patellar component after total knee arthroplasty.  J Arthroplasty. 1999;  14 940-944
• 19 Akagi M, Asano T, Clarke I C et al.. Wear and toughness of crosslinked polyethylene for total knee replacements: a study using a simulator and small-punch testing.  J Orthop Res. 2006;  24 2021-2027
• 20 Lachiewicz P F, Geyer M R. The use of highly cross-linked polyethylene in total knee arthroplasty.  J Am Acad Orthop Surg. 2010;  In press
• 21 Jung K A, Lee S C, Hwang S H, Kim S M. Fracture of a second-generation highly cross-linked UHMWPE tibial post in a posterior-stabilized scorpio knee system.  Orthopedics. 2008;  31 1137
• 22 Jung K A, Lee S C, Hwang S H, Kim S M. Fractured polyethylene tibial post in a posterior-stabilized knee prosthesis presenting as a floating palpable mass.  J Knee Surg. 2009;  22 374-376
• 23 Chun K A, Ohashi K, Bennett D L, El-Khoury G Y. Patellar fractures after total knee replacement.  AJR Am J Roentgenol. 2005;  185 655-660