RSS-Feed abonnieren
Bitte kopieren Sie die angezeigte URL und fügen sie dann in Ihren RSS-Reader ein.
https://www.thieme-connect.de/rss/thieme/de/10.1055-s-00000083.xml
Synlett 2016; 27(08): 1227-1231
DOI: 10.1055/s-0035-1561113
DOI: 10.1055/s-0035-1561113
cluster
Palladium–Polypyrrole Nanocomposites Pd@PPy for Direct C–H Functionalization of Pyrroles and Imidazoles with Bromoarenes
Weitere Informationen
Publikationsverlauf
Received: 10. November 2015
Accepted after revision: 14. Dezember 2015
Publikationsdatum:
05. Januar 2016 (online)
![](https://www.thieme-connect.de/media/synlett/201608/lookinside/thumbnails/st-2015-u0883-c_10-1055_s-0035-1561113-1.jpg)
Dedicated to the memory of Dr. Guy Lavigne
Abstract
Palladium–polypyrrole nanocomposites (Pd@PPy) with unique combination of high palladium dispersion (nanoparticle size 2.4 nm) and high palladium content (35 wt%) are efficient catalysts for the selective arylation of substituted pyrroles and imidazoles with either activated or deactivated aryl bromides. The performances of the recoverable supported palladium catalyst matches the best performances of homogeneous systems based on Pd(OAc)2 at 0.5–0.2 mol%, and largely overwhelm the classical Pd/C catalyst.
Supporting Information
- Supporting information for this article is available online at http://dx.doi.org/10.1055/s-0035-1561113.
- Supporting Information
-
References and Notes
-
1a Ritleng V, Sirlin C, Pfeffer M. Chem. Rev. 2002; 102: 1731
- 1b Parisien M, Valette D, Fagnou K. J. Org. Chem. 2005; 70: 7578
- 1c Alberico D, Scott ME, Lautens M. Chem. Rev. 2007; 107: 174
- 1d Satoh T, Miura M. Chem. Lett. 2007; 36: 200
- 1e Kakiuchi F. Synthesis 2008; 3013
- 1f Bellina F, Rossi R. Tetrahedron 2009; 65: 10269
- 1g Ackermann L, Vicente R, Kapdi AR. Angew. Chem. Int. Ed. 2009; 48: 9792
- 1h Chen X, Engle KM, Wang D.-H, Yu J.-Q. Angew. Chem. Int. Ed. 2009; 48: 5094
- 1i Roger J, Gottumukkala AL, Doucet H. ChemCatChem 2010; 2: 20
- 1j Yamaguchi J, Yamaguchi AD, Itami K. Angew. Chem. Int. Ed. 2012; 51: 8960
- 1k Wencel-Delord J, Glorius F. Nat. Chem. 2013; 5: 369
- 1l Rossi R, Bellina F, Lessi M, Manzini C. Adv. Synth. Catal. 2014; 356: 17
- 2a Battace A, Lemhadri M, Zair T, Doucet H, Santelli M. Organometallics 2007; 26: 472
- 2b Fall Y, Doucet H, Santelli M. ChemSusChem 2009; 2: 153
- 2c Roy D, Mom S, Beaupérin M, Doucet H, Hierso J.-C. Angew. Chem. Int. Ed. 2010; 49: 6650
- 2d Roy D, Mom S, Lucas D, Cattey H, Hierso J.-C, Doucet H. Chem. Eur. J. 2011; 17: 6453
- 2e Pivas-Art S, Satoh T, Kawamura Y, Miura M, Nomura M. Bull. Chem. Soc. Jpn. 1998; 71: 467
- 2f Bellina F, Rossi R. Tetrahedron 2006; 62: 7213
- 2g Bellina F, Calandri C, Cauteruccio S, Rossi R. Tetrahedron 2007; 63: 1970
- 2h Storr TE, Firth AG, Wilson K, Darley K, Baumann CG, Fairlamb IJ. S. Tetrahedron 2008; 64: 6125
- 2i Jafarpour F, Rahiminejadan S, Hazrati H. J. Org. Chem. 2010; 75: 3109
- 2j Shibahara F, Yamaguchi E, Murai T. Chem. Commun. 2010; 46: 2471
- 2k Zhao L, Bruneau C, Doucet H. ChemCatChem 2013; 5: 255
- 2l Bellina F, Guazzelli N, Lessi M, Manzini C. Tetrahedron 2015; 71: 2298
- 3 Djakovitch L, Felpin F.-X. ChemCatChem 2014; 6: 2175
- 4 Vasilyeva SV, Vorotyntsev MA, Bezverkhyy I, Lesniewska E, Heintz O, Chassagnon R. J. Phys. Chem. C 2008; 112: 19878
- 5 Zinovyeva VA, Vorotyntsev MA, Bezverkhyy I, Chaumont D, Hierso J.-C. Adv. Funct. Mater. 2011; 21: 1064
- 6a Magdesieva TV, Nikitin OM, Levitsky OA, Zinovyeva VA, Bezverkhyy I, Zolotukhina EV, Vorotyntsev MA. J. Mol. Catal. A: Chem. 2012; 50: 353
- 6b Magdesieva TV, Nikitin OM, Zolotukhina EV, Zinovyeva VA, Vorotyntsev MA. Mendeleev Commun. 2012; 22: 305
- 6c Magdesieva TV, Nikitin OM, Zolotukhina EV, Vorotyntsev MA. Electrochim. Acta 2014; 122: 289
- 7 Reay AJ, Fairlamb IJ. S. Chem. Commun. 2015; 51: 16289
- 8 Reported pK a for thiophenes and furans are C5 (or C2)–H = 33–36, and pK a of C5 (or C2)–H for pyrroles and indoles are in the range 38–40, see http://www.scripps.edu/baran/heterocycles/Essentials1-2009.pdf.
- 9 Roger J, Doucet H. Adv. Synth. Catal. 2009; 351: 1977
- 10 Improved isolated yields can be accessed for synthetic scales higher than 1.0 mmol. Recycling experiments were limited due to fractional material loss by paper filtration.
- 11 Bellina F, Cauteruccio S, Di Fiore A, Marchetti C, Rossi R. Tetrahedron 2008; 64: 6060 ; see also ref. 2l
- 12 Smari I, Youssef C, Ben Ammar H, Ben Hassine B, Soulé J.-F, Doucet H. Tetrahedron 2015; 71: 6586
- 13a Beaupérin M, Smaliy R, Cattey H, Meunier P, Ou J, Toy PH, Hierso J.-C. Chem. Commun. 2014; 50: 9505
- 13b Beaupérin M, Smaliy R, Cattey H, Meunier P, Ou J, Toy PH, Hierso J.-C. ChemPlusChem 2015; 80: 119
- 14 Typical Procedure All reactions were run under argon in Schlenk tubes using vacuum lines. DMAc analytical grade was not distilled before use. KOAc (99%) was used. Commercial aryl bromides, pyrroles, and imidazoles were used without purification. The reactions were followed by GC and NMR spectroscopy. 1H NMR spectra were recorded with a Bruker 300 MHz spectrometer in CDCl3 solutions. Chemical shifts are reported in ppm relative to CDCl3 (7.25 for 1H NMR). Flash chromatography was performed on silica gel (230–400 mesh). In a typical procedure, the aryl bromide (1 mmol), pyrrole (2 mmol), and KOAc (2 mmol) were introduced in a Schlenk tube, equipped with a magnetic stirring bar. The catalyst [either Pd@PPy,5 or Pd(OAc)2 at 0.02–2.0 mol%] and DMAc (2.5 ml) were added, and the Schlenk tube was purged several times using vacuum/argon flow. The Schlenk tube was placed in a preheated oil bath at 150 °C, and reactants were allowed to stir for 17 h. The reaction mixture was analyzed by GC and NMR to determine the conversion of aryl bromide. The solvent was then removed by heating the reaction vessel under vacuum, and the residue formed was charged directly onto a silica gel column. The products were eluted, using an appropriate ratio of EtOAc and heptane. Recycling procedure were based on simple Pd@PPy powder paper filtration, rinsing with a small portion of organic solvent, and drying under vacuum at 60 °C for 4 h. Subsequent catalytic tests were conducted using DMAc at 150 °C in the presence of KOAc and sufficient Pd@PPy collected from several experiments.
- 15 1-[4-(5-Acetyl-1-methyl-1H-pyrrol-2-yl)phenyl]ethanone (6a) The reaction of 4-bromoacetophenone (0.100 g, 1 mmol), 1-methyl-2-acetylpyrrole (0.120 mL, 2 mmol), and KOAc (0.098 g, 2 mmol) with Pd@PPy (0.003 g, 2% mol) affords the corresponding product 6a in 28% isolated yield. 1H NMR (200 MHz, CDCl3): δ = 8.02 (d, J = 8.4 Hz, 2 H), 7.51 (d, J = 8.4 Hz, 2 H), 7.03 (d, J = 4.0 Hz, 1 H), 6.29 (d, J = 4.0 Hz, 1 H), 3.91 (s, 3 H), 2.64 (s, 3 H), 2.48 (s, 3 H). 13C NMR (75 MHz, CDCl3): δ = 197.4, 188.7, 141.4, 136.4, 136.3, 132.7, 129.3, 128.6, 119.7, 110.1, 35.4, 27.5, 26.7. Anal. Calcd (%) for C15H15NO2: C, 74.67; H, 6.27; 5.81. Found: C, 73.92; H, 6.33; N, 5.40. HRMS (ESI+): m/z [M + H+] calcd for C15H15NO2: 242.118; Found: 242.172.
- 16 1-Methyl-5-(m-tolyl)-1H-pyrrole-2-carbaldehyde (7d) The reaction of 3-bromotoluene (0.060 mL, 1 mmol), 1-methyl-2-formylpyrrole (0.100 ml, 2 mmol), and KOAc (0.098 g, 2 mmol) with Pd@PPy (0.003 g, 2 mol%) affords the corresponding product 7d in 41% isolated yield. 1H NMR (300 MHz, CDCl3): δ = 9.57 (s, 1 H), 7.37–7.32 (m, 1 H), 7.26–7.20 (m, 3 H), 6.96 (dd, J = 4.1 Hz, 1 H), 6.29 (d, J = 4.1 Hz, 1 H), 3.93 (s, 3 H), 2.41 (s, 3 H). 13C NMR (75 MHz, CDCl3): δ = 179.5, 144.6, 138.4, 133.0, 131.1, 129.9, 129.4, 128.5, 126.3, 124.5, 110.7, 34.4, 21.5. Anal. Calcd (%) for C13H13NO: C, 78.36; H, 6.58; N, 7.03. Found: C, 77.93; H, 6.53; N, 6.70. HRMS (ESI+): m/z [M + H+] calcd for C13H13NO: 200.107; found: 200.190.
For selected examples of Pd-catalyzed pyrrole and imidazole arylations on C2 or C5 with haloarenes, see: