Synthesis of TRIPCO: A New Cyclooctyne for iSPAAC

Abstract

Strain-promoted azide–alkyne cycloadditions (SPAAC) are widely used for labeling azide-functionalized biomolecules in living cells but create mixtures of isomeric triazoles. We recently expanded the scope of SPAAC to the isomer-free generation of large functional molecules in living cells by designing the symmetrical pyrrolocyclooctynes PYRROC and SYPCO, which do not form isomers in SPAAC. Here, we present the synthesis and kinetic characterization of the cyclooctyne TRIPCO as a new reagent for isomer-free SPAAC (iSPAAC). TRIPCO was found to react faster than PYRROC and SYPCO in the [3+2] cycloaddition with benzyl azide.

Key words

bioorthogonal chemistry - cycloalkynes - isomer-free SPAAC - cycloaddition - azides

• References and Notes

• 1 Huisgen R. Angew. Chem., Int. Ed. Engl. 1963; 2: 565
• 2a Rostovtsev VV, Green LG, Fokin VV, Sharpless KB. Angew. Chem. Int. Ed. 2002; 41: 2596
• 2b Tornoe CW, Christensen C, Meldal M. J. Org. Chem. 2002; 67: 3057
• 2c Hein JE, Fokin VV. Chem. Soc. Rev. 2010; 39: 1302
• 3a Wittig G, Krebs A. Chem. Ber. 1961; 94: 3260
• 3b Jewett JC, Bertozzi CR. Chem. Soc. Rev. 2010; 39: 1272
• 3c Sletten EM, Bertozzi CR. Acc. Chem. Res. 2011; 44: 666
• 3d Dommerholt J, Rutjes FP, van Delft FL. Top. Curr. Chem. 2016; 374: 16
• 4a Agard NJ, Prescher JA, Bertozzi CR. J. Am. Chem. Soc. 2004; 126: 15046
• 4b Boudjemeline M, McNitt CD, Singleton TA, Popik VV, Kostikov AP. Org. Biomol. Chem. 2018; 16: 363
• 4c Varga BR, Kallay M, Hegyi K, Beni S, Kele P. Chem. Eur. J. 2012; 18: 822
• 4d Ning X, Guo J, Wolfert MA, Boons GJ. Angew. Chem. Int. Ed. 2008; 47: 2253
• 5 Dommerholt J, Schmidt S, Temming R, Hendriks LJ, Rutjes FP, van Hest JC, Lefeber DJ, Friedl P, van Delft FL. Angew. Chem. Int. Ed. 2010; 49: 9422
• 6 Friscourt F, Fahrni CJ, Boons GJ. J. Am. Chem. Soc. 2012; 134: 18809
• 7a Gröst C, Berg T. Org. Biomol. Chem. 2015; 13: 3866
• 7b Lis C, Rubner S, Grost C, Hoffmann R, Knappe D, Berg T. Chem. Eur. J. 2018; 24: 13762
• 8 Rutkowska A, Schultz C. Angew. Chem. Int. Ed. 2012; 51: 8166
• 9 Gower CM, Chang ME, Maly DJ. Crit. Rev. Biochem. Mol. Biol. 2014; 49: 102
• 10 Umemoto T, Ishihara S. J. Am. Chem. Soc. 1993; 115: 2156
• 11 Shao L.-X, Shi M. Synlett 2006; 1269
• 12 Nagib DA, MacMillan DW. C. Nature 2011; 480: 224
• 13 Oh SH, Malpani YR, Ha N, Jung Y.-S, Han SB. Org. Lett. 2014; 16: 1310
• 14 1,3-Bis(trifluoromethyl)-6,7-didehydro-4,5,8,9-tetrahydro-2H-cycloocta[c]pyrrole (1) A Schlenk tube was equipped with potassium tert-butoxide (71.4 mg, 0.64 mmol) and catalytic amounts of 18-crown-6. n-Hexane (740 μL) was added, and the tube was placed in an oil bath pre-heated to 55 °C. A solution of 7 (73.5 mg, 0.16 mmol) in n-hexane (740 μL) and diethyl ether (740 μL) was added dropwise. The reaction was stirred at 55 °C for 15 min and subsequently cooled with an ice bath. Iced water (10 mL) and 1 M HCl (600 μL) were added, and the mixture was extracted with diethyl ether (2 × 10 mL). The combined organic layers were dried over Na₂SO₄, adsorbed onto silica, and purified by column chromatography (n-hexane/DCM = 7:1, v/v) to provide 1 as a colorless solid; yield 14.7 mg (0.05 mmol, 33%); mp 115–119 °C; R_f = 0.40 (n-hexane/DCM = 5:1). ¹H NMR (300 MHz, CDCl₃): δ = 2.27–2.39 (m, 4 H), 2.96–3.08 (m, 4 H), 8.59 (s, 1 H) ppm. ¹⁹F NMR (282 MHz, CDCl₃): δ = –58.5 ppm. ¹³C NMR (101 MHz, CDCl₃): δ = 21.9, 27.7, 97.4, 118.4–119.6 (m), 121.2 (q, J = 268.5 Hz), 126.1 ppm. IR (KBr): ν = 3465 (w), 3324 (m), 2972 (w), 2944 (w), 1713 (w), 1635 (w), 1597 (w), 1523 (w), 1492 (w), 1469 (w), 1459 (w), 1444 (w), 1354 (w), 1333 (m), 1306 (s), 1238 (m), 1156 (s), 1118 (s), 1093 (m), 1027 (m), 1011 (w), 969 (w), 911 (w), 896 (w), 752 (w), 650 (w), 608 (w), 542 (w), 413 (w) cm^–1. ESI-HRMS: C₁₂H₉F₆N calcd. for [M-H⁺] m/z = 280.0566; found: 280.0566.
• 15 Hwang SJ, Cho SH, Chang S. J. Am. Chem. Soc. 2008; 130: 16158
• 16 30 mM stock solutions of 1 and benzyl azide in CD₃CN were rapidly mixed in a 1:1 ratio resulting in a final concentration of 15 mM each. The progress of the reaction was monitored by ¹H NMR spectroscopy. The ratio of the integrals of the methylene protons of benzyl azide, and of the methylene protons of the triazole product 8, was calculated to obtain the concentration of benzyl azide at each time point. From plotting of 1/[benzyl azide] vs time and linear regression the second-order rate constant k₂ was determined as the slope of the linear fit.
• 17 Baskin JM, Prescher JA, Laughlin ST, Agard NJ, Chang PV, Miller IA, Lo A, Codelli JA, Bertozzi CR. Proc. Natl. Acad. Sci. U.S.A. 2007; 104: 16793
• 18 Chenoweth K, Chenoweth D, Goddard WA. III. Org. Biomol. Chem. 2009; 7: 5255