J Neurol Surg B Skull Base 2022; 83(S 02): e260-e265
DOI: 10.1055/s-0041-1725027
Original Article

Primary Dural Repair via an Endoscopic Endonasal Corridor: Preliminary Development of a 3D-Printed Model for Training

Ivanna Nebor
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Ahmed E. Hussein
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Kora Montemagno
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Rebecca Fumagalli
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Ikrame Labiad
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Alice Xu
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Zoe Anderson
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Yash Patil
2   Department of Otolaryngology – Head and Neck Surgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Ahmad R. Sedaghat
2   Department of Otolaryngology – Head and Neck Surgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
,
Jonathan A. Forbes
1   Department of Neurosurgery, University of Cincinnati College of Medicine, Cincinnati, Ohio, United States
› Author Affiliations

Abstract

Objectives Endonasal suturing is an investigational method for dural repair that has been reported to decrease the incidence of cerebrospinal fluid fistula. This method requires handling of single-shaft instrumentation in the narrow endonasal corridor. In this study, we designed a low-cost, surgical model using three-dimensional (3D) printing technology to simulate dural repair through the endonasal corridor and subsequently assess the utility of the model for surgical training.

Methods Using an Ultimaker 2+ printer, a 3D-printed replica of the cranial base and nasal cavity was fitted with tissue allograft to recapitulate the dural layer. Residents, fellows, and attending surgeons were asked to place two sutures using a 0-degree endoscope and single-shaft needle driver. Task completion time was recorded. Participants were asked to fill out a Likert scale questionnaire after the experiment.

Results Twenty-six participants were separated into groups based on their prior endoscope experience: novice, intermediate, and expert. Twenty-one (95.5%) residents and fellows rated the model as “excellent” or “good” in enhancing their technical skills with endoscopic instrumentation. Three of four (75%) of attendings felt that the model was “excellent” or “good” in usefulness for training in dural suturing. Novice participants required an average of 11 minutes for task completion, as compared with 8.7 minutes for intermediates and 5.7 minutes for experts.

Conclusion The proposed model appears to be highly effective in enhancing the endoscopic skills and recapitulating the task of dural repair. Such a low-cost model may be especially important in enhancing endoscopic facility in countries/regions with limited access to cadaveric specimens.



Publication History

Received: 11 July 2020

Accepted: 13 January 2021

Article published online:
02 March 2021

© 2021. Thieme. All rights reserved.

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 
  • References

  • 1 Oostra A, van Furth W, Georgalas C. Extended endoscopic endonasal skull base surgery: from the sella to the anterior and posterior cranial fossa. ANZ J Surg 2012; 82 (03) 122-130
  • 2 Radovanovic I, Dehdashti AR, Turel MK. et al. Expanded endonasal endoscopic surgery in suprasellar craniopharyngiomas: a retrospective analysis of 43 surgeries including recurrent cases. Oper Neurosurg (Hagerstown) 2019; 17 (02) 132-142
  • 3 Thomas R, Chacko AG. Principles in skull base reconstruction following expanded endoscopic approaches. J Neurol Surg B Skull Base 2016; 77 (04) 358-363
  • 4 Xie T, Zhang X, Gu Y, Sun C, Liu T. A low cost and stepwise training model for skull base repair using a suturing and knotting technique during endoscopic endonasal surgery. Eur Arch Otorhinolaryngol 2018; 275 (08) 2187-2192
  • 5 Ahn JY, Kim SH. A new technique for dural suturing with fascia graft for cerebrospinal fluid leakage in transsphenoidal surgery. Neurosurgery 2009; 65 (6, Suppl): discussion 71–72 65-71
  • 6 Yamada S, Fukuhara N, Oyama K. et al. Surgical outcome in 90 patients with craniopharyngioma: an evaluation of transsphenoidal surgery. World Neurosurg 2010; 74 (2-3): 320-330
  • 7 Kim EH, Roh TH, Park HH, Moon JH, Hong JB, Kim SH. Direct suture technique of normal gland edge on the incised dura margin to repair the intraoperative cerebrospinal fluid leakage from the arachnoid recess during transsphenoidal pituitary tumor surgery. Neurosurgery 2015; 11 (Suppl. 02) 26-31 , discussion 31
  • 8 Kizmazoglu C, Ozyoruk S, Husemoglu RB, Kalemci O, Sozer G, Sade B. Comparison of dural closure alternatives: an experimental study. Br J Neurosurg 2019; 33 (06) 655-658
  • 9 Horiguchi K, Nishioka H, Fukuhara N, Yamaguchi-Okada M, Yamada S. A new multilayer reconstruction using nasal septal flap combined with fascia graft dural suturing for high-flow cerebrospinal fluid leak after endoscopic endonasal surgery. Neurosurg Rev 2016; 39 (03) 419-427
  • 10 Chang DR, Lin RP, Bowe S. et al. Fabrication and validation of a low-cost, medium-fidelity silicone injection molded endoscopic sinus surgery simulation model. Laryngoscope 2017; 127 (04) 781-786
  • 11 Rosseau G, Bailes J, del Maestro R. et al. The development of a virtual simulator for training neurosurgeons to perform and perfect endoscopic endonasal transsphenoidal surgery. Neurosurgery 2013; 73 (Suppl. 01) 85-93
  • 12 Ding CY, Yi XH, Jiang CZ. et al. Development and validation of a multi-color model using 3-dimensional printing technology for endoscopic endonasal surgical training. Am J Transl Res 2019; 11 (02) 1040-1048
  • 13 Chen S, Pan Z, Wu Y. et al. The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep 2017; 7 (01) 575
  • 14 Alrasheed AS, Nguyen LHP, Mongeau L, Funnell WRJ, Tewfik MA. Development and validation of a 3D-printed model of the ostiomeatal complex and frontal sinus for endoscopic sinus surgery training. Int Forum Allergy Rhinol 2017; 7 (08) 837-841
  • 15 Wen G, Cong Z, Liu K. et al. A practical 3D printed simulator for endoscopic endonasal transsphenoidal surgery to improve basic operational skills. Childs Nerv Syst 2016; 32 (06) 1109-1116
  • 16 Zwagerman NT, Geltzeiler MN, Wang EW, Fernandez-Miranda JC, Snyderman CH, Gardner PA. Endonasal suturing of nasoseptal flap to nasopharyngeal fascia using the V–LocTM wound closure device: 2-dimensional operative video. Oper Neurosurg (Hagerstown) 2019; 16 (02) 40-41
  • 17 Yamagata S, Goto K, Oda Y, Kikuchi H. Clinical experience with expanded polytetrafluoroethylene sheet used as an artificial dura mater. Neurol Med Chir (Tokyo) 1993; 33 (08) 582-585
  • 18 Pierson M, Birinyi PV, Bhimireddy S, Coppens JR. Analysis of decompressive craniectomies with subsequent cranioplasties in the presence of collagen matrix dural substitute and polytetrafluoroethylene as an adhesion preventative material. World Neurosurg 2016; 86: 153-160
  • 19 Jusue-Torres I, Sivakanthan S, Pinheiro-Neto CD, Gardner PA, Snyderman CH, Fernandez-Miranda JC. Chicken wing training model for endoscopic microsurgery. J Neurol Surg B Skull Base 2013; 74 (05) 286-291