Synlett 2021; 32(02): 202-206
DOI: 10.1055/s-0040-1706548
cluster
Modern Heterocycle Synthesis and Functionalization

Rhodium(III)-Catalyzed C–H Activation: Annulation of Petrochemical Feedstocks for the Construction of Isoquinolone Scaffolds

a   Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, USA
,
Dehuan Kong
b   BioDuro, No. 233 North FuTe Road, WaiGaoQiao Free Trade Zone, Shanghai 200131, P. R. of China
,
Wei Li
b   BioDuro, No. 233 North FuTe Road, WaiGaoQiao Free Trade Zone, Shanghai 200131, P. R. of China
,
a   Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, USA
,
a   Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, USA
,
Sylvie K. Sakata
a   Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, USA
,
Nicole Sun
b   BioDuro, No. 233 North FuTe Road, WaiGaoQiao Free Trade Zone, Shanghai 200131, P. R. of China
,
a   Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, USA
› Author Affiliations


This manuscript is dedicated to the memory ofProf. Keith Fagnou in celebration of his impact on the field of heterocycle synthesis and functionalization through metal-catalyzed C–H activation

Abstract

We describe a simple and robust procedure for the Rh(III)-catalyzed [4+2] cycloaddition of feedstock gases enabled through C–H activation. A diverse set of 3,4-dihydroisoquinolones and 3-methylisoquinolones have been prepared in good to excellent yields. The effects of using ethylene and propyne as coupling partners on C–H site selectivity have also been explored with a representative set of substrates and are discussed herein.

Supporting Information



Publication History

Received: 25 August 2020

Accepted after revision: 29 September 2020

Article published online:
05 January 2021

© 2021. Thieme. All rights reserved

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 
  • References and Notes

  • 1 Kumpf RA, McAlpine IJ, McTigue MA, Patman R, Rui EY, Tatlock JH, Tran-Dubé MB, Wythes MJ. WO2017212385, 2017
  • 2 For a selected review on palladium-catalyzed allylic alkylation with heteroatom nucleophiles, see: Trost BM, Zhang T, Sieber JD. Chem. Sci. 2010;  1: 427

    • For recent reviews of the Pictet–Spengler reaction, see:
    • 3a Calcaterra A, Mangiardi L, Monache GD, Quaglio D, Balducci S, Berardozzi S, Iazzetti A, Franzini R, Botta B, Ghirga F. Molecules 2020; 25: 414
    • 3b Gholamzadeh P. In Advances in Heterocyclic Chemistry, Vol. 127. Scriven EF. V, Ramsden CA. Elsevier; Amsterdam: 2019: 153
  • 4 Alajarín R, Burgos C. In Modern Heterocyclic Chemistry . Alvarez-Builla J, Vaquero JJ, Barluenga J. Wiley-VCH; Weinheim: 2011: 1527
  • 5 Muralirajan K, Cheng C.-H. In Transition Metal-Catalyzed Heterocycle Synthesis via C–H Activation . Wu X.-F. Wiley-VCH; Weinheim: 2016: 117
  • 12 For a recent review on the use of feedstock reagents in metal-catalyzed C–C bond formation via reductive C=O coupling, see: Doerksen RS, Meyer CC, Krische MJ. Angew. Chem. Int. Ed. 2019; 58: 14055
  • 14 Kulkarni MR, Gaikwad ND. ChemistrySelect 2020; 5: 8157
  • 15 For an isolated example cobalt-catalyzed aminoquinoline-directed annulation of ethylene, see: Grigorjeva L, Daugulis O. Org. Lett. 2014; 16: 4684
  • 16 For a highlight on the advantageous effects of fluorinated alcohol solvents on C–H functionalization reactions, see: Wencel-Delord J, Colobert F. Org. Chem. Front. 2016; 3: 394
  • 17 General Procedure for Ethylene (2) Insertion To a vial, equipped with a magnetic stir bar and rubber septum, was added O-pivaloyl benzhydroxamic acid (1, 1.00 mmol, 1.0 equiv), [Cp*RhCl2]2 (0.025 mmol, 2.5 mol%), and CsOPiv (2.00 mmol, 2.0 equiv). The vial was purged with ethylene (2) under dynamic vacuum for 10 s. Then trifluoroethanol (5.0 mL, 0.2 M) was added, and the reaction mixture was sparged with ethylene (2) for 2 min. The vial was stirred under a balloon of ethylene (2; atmospheric pressure) at room temperature for 16–20 h. After 16–20 h, the reaction was filtered using EtOAc, and the filtrate was concentrated under reduced pressure. The crude residue was purified via flash column chromatography to afford dihydroisoquinolones 3. Representative Compound 3g Following the general procedure using 1g (424 mg, 1.00 mmol, 1.0 equiv), purification via flash column chromatography (12 g SiO2, Isco, 0–10% MeOH/DCM) afforded dihydroisoquinolone 3g (335.4 mg, 96% yield) as a white solid. 1H NMR (400 MHz, DMSO-d 6): δ = 7.87 (br s, 1 H), 7.61–7.50 (m, 2 H), 7.45–7.34 (m, 3 H), 7.34–7.26 (m, 1 H), 5.18 (s, 2 H), 3.33–3.28 (m, 2 H), 2.86 (t, J = 6.2 Hz, 2 H). 13C NMR (101 MHz, DMSO-d 6): δ = 161.5 (d, J = 2.2 Hz), 154.7 (d, J = 2.2 Hz), 149.0 (d, J = 236.2 Hz), 136.9, 129.5 (d, J = 19.8 Hz), 128.2, 127.5, 127.0, 119.3 (d, J = 2.2 Hz), 117.3, 111.4 (d, J = 23.5 Hz), 70.6, 38.2, 22.8 (d, J = 2.2 Hz). 19F NMR (376 MHz, DMSO-d 6): δ = –122.1 (s).
  • 18 General Procedure for Propyne (4) Insertion To a vial, equipped with a magnetic stir bar and rubber septum, was added O-pivaloyl benzhydroxamic acid (1, 0.300 mmol, 1.0 equiv), [Cp*RhCl2]2 (0.0075 mmol, 2.5 mol%), and CsOPiv (0.600 mmol, 2.0 equiv). The vial was purged with propyne (4) under dynamic vacuum for 10 s. Then trifluoroethanol (1.5 mL, 0.2 M) was added, and the reaction mixture was sparged with propyne (4) for 2 min. The vial was stirred under a balloon of propyne (4; atmospheric pressure) at room temperature for 16–20 h. The balloon deflated slowly overnight but this did not inhibit the reaction. After 16–20 h, the reaction was transferred to a flask using EtOAc and concentrated under reduced pressure. The crude residue was purified via flash column chromatography to afford isoquinolones 5. Representative Compound 5a Following the general procedure using 1a (86 mg, 0.300 mmol, 1.0 equiv), purification via flash column chromatography (4 g SiO2, Biotage, 0–10% MeOH/DCM) afforded isoquinolone 5a (62 mg, 92% yield) as a white solid. 1H NMR (400 MHz, DMSO-d 6): δ = 11.57 (br s, 1 H), 8.30 (d, J = 8.4 Hz, 1 H), 7.97 (s, 1 H), 7.66 (dd, J = 8.4, 1.6 Hz, 1 H), 6.48 (s, 1 H), 2.24 (s, 3 H). 13C NMR (101 MHz, DMSO-d 6): δ = 161.7, 140.6, 138.4, 132.1 (q, J = 31.7 Hz), 128.1, 126.4, 123.9 (q, J = 272.70 Hz), 122.8 (q, J = 4.12 Hz), 120.9 (q, J = 3.4 Hz), 102.6, 18.8. 19F NMR (376 MHz, DMSO-d 6): δ = –61.6.
  • 19 Small-molecule X-ray crystal structures corroborating the regiochemical assignment of 5b (CCDC 2024479) and 5g (CCDC 2024480) have been obtained and deposited. The data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/getstructures.
  • 20 Handy ST, Zhang Y. Chem. Commun. 2006; 299